{"id":1997,"date":"2025-10-27T16:51:02","date_gmt":"2025-10-27T16:51:02","guid":{"rendered":"https:\/\/www.redlinestands.com\/blog\/?p=1997"},"modified":"2025-10-27T17:42:26","modified_gmt":"2025-10-27T17:42:26","slug":"shop-press-12-20-50-ton-capacity-guide","status":"publish","type":"post","link":"https:\/\/www.redlinestands.com\/blog\/shop-press-12-20-50-ton-capacity-guide\/","title":{"rendered":"12-Ton vs 20-Ton vs 50-Ton Shop Press: Which Capacity Do You Need?"},"content":{"rendered":"<p><span data-preserver-spaces=\"true\">You want a shop press matching your jobs, space, and budget. This guide compares 12-ton, 20-ton, and 50-ton shop presses clearly so you can pick with confidence. You will see what each size can do, the specs that matter, and the safety steps that protect you and your parts.<\/span><\/p>\n<h2><strong><span data-preserver-spaces=\"true\">TL;DR: Pick Your Capacity By Job<\/span><\/strong><\/h2>\n<ul>\n<li><strong><span data-preserver-spaces=\"true\">12 ton<\/span><\/strong><span data-preserver-spaces=\"true\">: u-joints and miniature bearings, light straightening<\/span><\/li>\n<li><strong><span data-preserver-spaces=\"true\">20 ton<\/span><\/strong><span data-preserver-spaces=\"true\">: control arm bushings and hubs, gears and sleeves<\/span><\/li>\n<li><strong><span data-preserver-spaces=\"true\">50 ton<\/span><\/strong><span data-preserver-spaces=\"true\">: seized sleeves and thick plate work, heavy truck and ag parts<\/span><\/li>\n<\/ul>\n<p><span data-preserver-spaces=\"true\">Skip to the comparison table if you want the quick view.<\/span><\/p>\n<p>&nbsp;<\/p>\n<h2><strong><span data-preserver-spaces=\"true\">What a Shop Press Does and the Types You Can Buy<\/span><\/strong><\/h2>\n<p><span data-preserver-spaces=\"true\">A shop press applies a steady force to press, bend, broach, or straighten parts. You can push wheel bearings, fit bushings, seat sleeves, or flatten a bent bracket. That same force can also bend steel with a press brake kit or form dimple dies with the proper tooling.<\/span><\/p>\n<p><span data-preserver-spaces=\"true\">Common formats:<\/span><\/p>\n<ul>\n<li><span data-preserver-spaces=\"true\">H-frame floor press for power and daylight<\/span><\/li>\n<li><span data-preserver-spaces=\"true\">Benchtop press for tight spaces and lighter work<\/span><\/li>\n<\/ul>\n<p><span data-preserver-spaces=\"true\">Common power options:<\/span><\/p>\n<ul>\n<li><span data-preserver-spaces=\"true\">Manual hydraulic for low cost and simple upkeep<\/span><\/li>\n<li><span data-preserver-spaces=\"true\">Air over hydraulic for speed and less fatigue<\/span><\/li>\n<\/ul>\n<p><span data-preserver-spaces=\"true\">Want a deeper look at use cases before you buy? Read our post on the<\/span><a class=\"editor-rtfLink\" href=\"https:\/\/www.redlinestands.com\/blog\/exploring-the-multifaceted-uses-of-a-workshop-press\/\" target=\"_blank\" rel=\"noopener\"><span data-preserver-spaces=\"true\"> uses of a workshop press<\/span><\/a><span data-preserver-spaces=\"true\">.<\/span><\/p>\n<h2><strong><span data-preserver-spaces=\"true\">Tonnage 101: Force, PSI, Frame Stiffness, and Headroom<\/span><\/strong><\/h2>\n<p><span data-preserver-spaces=\"true\">Tonnage is peak force. A larger cylinder bore and a certain pump pressure create that number. The label on the jack is not the whole story. Real results depend on frame rigidity, plate thickness, and how well you fix the work.<\/span><\/p>\n<p><span data-preserver-spaces=\"true\">Key points you can use today:<\/span><\/p>\n<ul>\n<li><span data-preserver-spaces=\"true\">Plan 20 to 30 percent headroom for your most demanding jobs<\/span><\/li>\n<li><span data-preserver-spaces=\"true\">Trust a protected, readable gauge that lets you watch force as you press<\/span><\/li>\n<\/ul>\n<p><span data-preserver-spaces=\"true\">A stiff frame with flat <\/span><span data-preserver-spaces=\"true\">arbor<\/span><span data-preserver-spaces=\"true\"> plates gives you more of the tonnage you paid <\/span><span data-preserver-spaces=\"true\">for<\/span><span data-preserver-spaces=\"true\">. A flimsy frame with soft plates will flex and waste force before the part moves.<\/span><\/p>\n<p>&nbsp;<\/p>\n<h2><strong><span data-preserver-spaces=\"true\">Capacity by Job: What You Can Do at 12t, 20t, and 50t<\/span><\/strong><\/h2>\n<h4><strong><span data-preserver-spaces=\"true\">12 ton<\/span><\/strong><\/h4>\n<p><span data-preserver-spaces=\"true\">Suitable for u-joints and <\/span><span data-preserver-spaces=\"true\">small<\/span><span data-preserver-spaces=\"true\"> bearings on motorcycles or ATVs. You can straighten light brackets or press small bushings in control arms that are clean and rust-free. You will slow down on stubborn assemblies, and you may run out of daylight on tall parts.<\/span><\/p>\n<h4><strong><span data-preserver-spaces=\"true\">20 ton<\/span><\/strong><\/h4>\n<p><span data-preserver-spaces=\"true\">Strong enough for most passenger-vehicle work. Think control arm bushings, wheel bearings and hubs, and light gear work. <\/span><span data-preserver-spaces=\"true\">This<\/span><span data-preserver-spaces=\"true\"> is the sweet spot for home garages and small shops that service cars all week. It also supports more tooling, so you can confidently bend the plate with a press brake kit or <\/span><span data-preserver-spaces=\"true\">use<\/span><span data-preserver-spaces=\"true\"> a bearing splitter. <\/span><span data-preserver-spaces=\"true\">For a focused view, see our<\/span><a class=\"editor-rtfLink\" href=\"https:\/\/www.redlinestands.com\/blog\/a-buying-guide-for-20-ton-shop-press-for-home-and-pro-use\/\" target=\"_blank\" rel=\"noopener\"> <span data-preserver-spaces=\"true\">buying guide for<\/span><span data-preserver-spaces=\"true\"> 20 <\/span><span data-preserver-spaces=\"true\">ton<\/span><span data-preserver-spaces=\"true\"> shop press<\/span><\/a><span data-preserver-spaces=\"true\">.<\/span><\/p>\n<h4><strong><span data-preserver-spaces=\"true\">50 ton<\/span><\/strong><\/h4>\n<p><span data-preserver-spaces=\"true\">Built for seized sleeves, heavy truck hubs, and thicker plate forming with the right dies. You gain throughput, and you save your shoulders. You also need space, careful anchoring, and good shields. This size fits pro shops, chassis builders, fleets, and ag equipment service.<\/span><\/p>\n<p><span data-preserver-spaces=\"true\">Curious why a stronger press can pay off over time? We cover that in<\/span><a class=\"editor-rtfLink\" href=\"https:\/\/www.redlinestands.com\/blog\/5-benefits-of-using-a-hydraulic-shop-press\/\" target=\"_blank\" rel=\"noopener\"><span data-preserver-spaces=\"true\"> the<\/span><span data-preserver-spaces=\"true\"> 5 <\/span><span data-preserver-spaces=\"true\">benefits of using a hydraulic shop press<\/span><\/a><span data-preserver-spaces=\"true\">.<\/span><\/p>\n<p><a href=\"https:\/\/www.redlinestands.com\/catalog\/shop-equipment-c-327\/hydraulic-shop-press-c-327_548\/all-shop-presses-c-327_548_246\/redline-12-ton-manual-hydraulic-shop-press-p-2099\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter wp-image-2004 size-full\" src=\"https:\/\/www.redlinestands.com\/wordpress\/wp-content\/uploads\/2025\/10\/12-ton-shop-press.jpg\" alt=\"shop press\" width=\"1200\" height=\"675\" srcset=\"https:\/\/www.redlinestands.com\/wordpress\/wp-content\/uploads\/2025\/10\/12-ton-shop-press.jpg 1200w, https:\/\/www.redlinestands.com\/wordpress\/wp-content\/uploads\/2025\/10\/12-ton-shop-press-300x169.jpg 300w, https:\/\/www.redlinestands.com\/wordpress\/wp-content\/uploads\/2025\/10\/12-ton-shop-press-1024x576.jpg 1024w, https:\/\/www.redlinestands.com\/wordpress\/wp-content\/uploads\/2025\/10\/12-ton-shop-press-768x432.jpg 768w, https:\/\/www.redlinestands.com\/wordpress\/wp-content\/uploads\/2025\/10\/12-ton-shop-press-624x351.jpg 624w\" sizes=\"auto, (max-width: 1200px) 100vw, 1200px\" \/><\/a><\/p>\n<h2><strong><span data-preserver-spaces=\"true\">Deep Dive: 12 Ton Shop Press<\/span><\/strong><\/h2>\n<h4><strong><span data-preserver-spaces=\"true\">Pros<\/span><\/strong><\/h4>\n<ul>\n<li><span data-preserver-spaces=\"true\">Compact footprint and simple setup. Friendly price and easy to move.<\/span><\/li>\n<\/ul>\n<h4><strong><span data-preserver-spaces=\"true\">Cons<\/span><\/strong><\/h4>\n<ul>\n<li><span data-preserver-spaces=\"true\">Limited daylight and working width. Slower on stuck parts.<\/span><\/li>\n<\/ul>\n<h4><strong><span data-preserver-spaces=\"true\">Best for<\/span><\/strong><\/h4>\n<ul>\n<li><span data-preserver-spaces=\"true\">DIY users who service <\/span><span data-preserver-spaces=\"true\">small<\/span><span data-preserver-spaces=\"true\"> bearings or do light straightening. Motorcycle and ATV jobs fit well here.<\/span><\/li>\n<\/ul>\n<h4><strong><span data-preserver-spaces=\"true\">Accessories to add<\/span><\/strong><\/h4>\n<ul>\n<li><span data-preserver-spaces=\"true\">Arbor<\/span><span data-preserver-spaces=\"true\"> plates that are thick and flat<\/span><\/li>\n<li><span data-preserver-spaces=\"true\">V-blocks for round stock and centred loads<\/span><\/li>\n<\/ul>\n<p><a href=\"https:\/\/www.redlinestands.com\/catalog\/shop-equipment-c-327\/hydraulic-shop-press-c-327_548\/all-shop-presses-c-327_548_246\/redline-20-ton-air-hydraulic-mechanics-press-clearance-p-3114\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter wp-image-2001 size-full\" src=\"https:\/\/www.redlinestands.com\/wordpress\/wp-content\/uploads\/2025\/10\/20-ton-shop-press.png\" alt=\"shop press\" width=\"1200\" height=\"675\" srcset=\"https:\/\/www.redlinestands.com\/wordpress\/wp-content\/uploads\/2025\/10\/20-ton-shop-press.png 1200w, https:\/\/www.redlinestands.com\/wordpress\/wp-content\/uploads\/2025\/10\/20-ton-shop-press-300x169.png 300w, https:\/\/www.redlinestands.com\/wordpress\/wp-content\/uploads\/2025\/10\/20-ton-shop-press-1024x576.png 1024w, https:\/\/www.redlinestands.com\/wordpress\/wp-content\/uploads\/2025\/10\/20-ton-shop-press-768x432.png 768w, https:\/\/www.redlinestands.com\/wordpress\/wp-content\/uploads\/2025\/10\/20-ton-shop-press-624x351.png 624w\" sizes=\"auto, (max-width: 1200px) 100vw, 1200px\" \/><\/a><\/p>\n<h2><strong><span data-preserver-spaces=\"true\">Deep Dive: 20 Ton Shop Press<\/span><\/strong><\/h2>\n<h4><strong><span data-preserver-spaces=\"true\">Why does it work so well?<\/span><\/strong><\/h4>\n<p><span data-preserver-spaces=\"true\">You get enough force for almost all car jobs and light truck tasks. You can run air over hydraulic for speed. Add a press brake kit for bends and a bearing splitter for clean pushing under the race.<\/span><\/p>\n<p><span data-preserver-spaces=\"true\">Revisit the practical details in our<\/span><a class=\"editor-rtfLink\" href=\"https:\/\/www.redlinestands.com\/blog\/a-buying-guide-for-20-ton-shop-press-for-home-and-pro-use\/\" target=\"_blank\" rel=\"noopener\"><span data-preserver-spaces=\"true\"> 20-ton shop press buying guide<\/span><\/a><span data-preserver-spaces=\"true\">.<\/span><\/p>\n<h4><strong><span data-preserver-spaces=\"true\">Watch-outs<\/span><\/strong><\/h4>\n<p><span data-preserver-spaces=\"true\">It needs floor space and a safe path for long parts. Plan your bed height and plate spans before you pump.<\/span><\/p>\n<p><a href=\"https:\/\/www.redlinestands.com\/catalog\/shop-equipment-c-327\/hydraulic-shop-press-c-327_548\/all-shop-presses-c-327_548_246\/redline-50-ton-economy-air-hydraulic-shop-press-with-winch-p-3051\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter wp-image-2002 size-full\" src=\"https:\/\/www.redlinestands.com\/wordpress\/wp-content\/uploads\/2025\/10\/50-ton-shop-press.png\" alt=\"shop press\" width=\"1200\" height=\"675\" srcset=\"https:\/\/www.redlinestands.com\/wordpress\/wp-content\/uploads\/2025\/10\/50-ton-shop-press.png 1200w, https:\/\/www.redlinestands.com\/wordpress\/wp-content\/uploads\/2025\/10\/50-ton-shop-press-300x169.png 300w, https:\/\/www.redlinestands.com\/wordpress\/wp-content\/uploads\/2025\/10\/50-ton-shop-press-1024x576.png 1024w, https:\/\/www.redlinestands.com\/wordpress\/wp-content\/uploads\/2025\/10\/50-ton-shop-press-768x432.png 768w, https:\/\/www.redlinestands.com\/wordpress\/wp-content\/uploads\/2025\/10\/50-ton-shop-press-624x351.png 624w\" sizes=\"auto, (max-width: 1200px) 100vw, 1200px\" \/><\/a><\/p>\n<h2><strong><span data-preserver-spaces=\"true\">Deep Dive: 50 Ton Shop Press<\/span><\/strong><\/h2>\n<h4><strong><span data-preserver-spaces=\"true\">Strengths<\/span><\/strong><\/h4>\n<p><span data-preserver-spaces=\"true\">Fast work on stuck sleeves and thick bends with the right dies. The frame is larger and stiffer, so less deflection and more work done per stroke.<\/span><\/p>\n<h4><strong><span data-preserver-spaces=\"true\">Requirements<\/span><\/strong><\/h4>\n<p><span data-preserver-spaces=\"true\">You need room, a level slab, and anchors that meet the maker\u2019s spec. You also need shields and fixtures that match the force. Never press against cracked plates or bent pins.<\/span><\/p>\n<h4><strong><span data-preserver-spaces=\"true\">Best for<\/span><\/strong><\/h4>\n<p><span data-preserver-spaces=\"true\">Pro service, fab and chassis builds, fleets, and ag repair, where time saved is money saved.<\/span><\/p>\n<p>&nbsp;<\/p>\n<h2><strong><span data-preserver-spaces=\"true\">Specs That Matter More Than The Nameplate<\/span><\/strong><\/h2>\n<p><span data-preserver-spaces=\"true\">Two presses can both say 20 tons and give you very different results. Focus on these specs:<\/span><\/p>\n<ul>\n<li><strong><span data-preserver-spaces=\"true\">Daylight and working width: <\/span><\/strong><span data-preserver-spaces=\"true\">More opening and width lets you keep assemblies intact. That saves time and reduces risk.<\/span><\/li>\n<li><strong><span data-preserver-spaces=\"true\">Ram stroke and speed:<\/span><\/strong><span data-preserver-spaces=\"true\"> More stroke means fewer resets. A faster approach saves minutes on every job.<\/span><\/li>\n<li><strong><span data-preserver-spaces=\"true\">Bed adjustment and winch assist:<\/span><\/strong><span data-preserver-spaces=\"true\"> A pin ladder is fine for light work. A winch-assisted bed saves your back and keeps the bed level as you move it.<\/span><\/li>\n<li><strong><span data-preserver-spaces=\"true\">Arbor<\/span><span data-preserver-spaces=\"true\"> plates and flatness:<\/span><\/strong><span data-preserver-spaces=\"true\"> Thick, heat-treated plates spread load and resist bowing. Flat plates grip. Soft plates crush and send the work flying.<\/span><\/li>\n<li><strong><span data-preserver-spaces=\"true\">Gauge placement and protection:<\/span><\/strong><span data-preserver-spaces=\"true\"> A gauge at eye level with protection lets you read force and stop before you break parts.<\/span><\/li>\n<li><strong><span data-preserver-spaces=\"true\">Power unit choice:<\/span><\/strong><span data-preserver-spaces=\"true\"> Manual is cheap and straightforward. Air over hydraulic speeds up repeat jobs and keeps your hands clear.<\/span><\/li>\n<\/ul>\n<p><span data-preserver-spaces=\"true\">If<\/span><span data-preserver-spaces=\"true\"> you want to look at stronger builds and better hardware<\/span><span data-preserver-spaces=\"true\">, check our notes on<\/span><a class=\"editor-rtfLink\" href=\"https:\/\/www.redlinestands.com\/blog\/harbor-freight-shop-press-alternatives\/\" target=\"_blank\" rel=\"noopener\"> <span data-preserver-spaces=\"true\">Harbor<\/span><span data-preserver-spaces=\"true\"> Freight shop press alternatives<\/span><\/a><span data-preserver-spaces=\"true\">.<\/span><\/p>\n<h2><strong><span data-preserver-spaces=\"true\">Setup, Space Planning, and Safety Essentials<\/span><\/strong><\/h2>\n<p><span data-preserver-spaces=\"true\">Set the press on a level slab. Anchor floor models if the maker calls for it. Route hoses away from pinch points and heat. Bleed air from the system after you assemble it.<\/span><\/p>\n<p><span data-preserver-spaces=\"true\">Follow these safety habits every time:<\/span><\/p>\n<ul>\n<li><span data-preserver-spaces=\"true\">Wear eye protection and gloves<\/span><\/li>\n<li><span data-preserver-spaces=\"true\">Center the load over the ram and plates<\/span><\/li>\n<li><span data-preserver-spaces=\"true\">Use shields for parts that can pop<\/span><\/li>\n<li><span data-preserver-spaces=\"true\">Release pressure in a controlled way<\/span><\/li>\n<\/ul>\n<p><strong><span data-preserver-spaces=\"true\">Pro tip<\/span><\/strong><span data-preserver-spaces=\"true\">: Never stack unknown scrap under the work. Use solid, flat spacers or proper V-blocks. Keep your hands off the pinch zone. Use a drift or a pusher with a handle when you need to position a part under force.<\/span><\/p>\n<h2><strong><span data-preserver-spaces=\"true\">Tooling That Expands What Your Press Can Do<\/span><\/strong><\/h2>\n<p><span data-preserver-spaces=\"true\">Tooling turns a simple press into a flexible station. Start with two or four pieces and add more as jobs come in.<\/span><\/p>\n<ul>\n<li><span data-preserver-spaces=\"true\">Arbor<\/span><span data-preserver-spaces=\"true\"> plates that match your capacity<\/span><\/li>\n<li><span data-preserver-spaces=\"true\">Bearing splitter to grab the race and push on the right surface<\/span><\/li>\n<li><span data-preserver-spaces=\"true\">Press brake kit for bending plate and flat bar<\/span><\/li>\n<li><span data-preserver-spaces=\"true\">Step mandrels or dimple dies for forming with control<\/span><\/li>\n<\/ul>\n<p><span data-preserver-spaces=\"true\">Many users find that better tooling solves more problems than a bigger press. Try the right splitter or a stronger plate set before you upgrade tonnage.<\/span><\/p>\n<p>&nbsp;<\/p>\n<h2><strong><span data-preserver-spaces=\"true\">Comparison Table: 12t vs 20t vs 50t<\/span><\/strong><\/h2>\n<table>\n<tbody>\n<tr>\n<td><b>Capacity<\/b><\/td>\n<td><b>Typical jobs<\/b><\/td>\n<td><b>Daylight and width notes<\/b><\/td>\n<td><b>Pros<\/b><\/td>\n<td><b>Cons<\/b><\/td>\n<td><b>Ideal user<\/b><\/td>\n<td><b>Recommended accessories<\/b><\/td>\n<\/tr>\n<tr>\n<td><span style=\"font-weight: 400;\">12 ton<\/span><\/td>\n<td><span style=\"font-weight: 400;\">U-joints and small bearings, light straightening<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Shorter daylight and narrow width fit small work<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Small footprint and low cost<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Slower on stubborn parts and limited height<\/span><\/td>\n<td><span style=\"font-weight: 400;\">DIY and motorcycle or ATV service<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Thick arbor plates and V-blocks<\/span><\/td>\n<\/tr>\n<tr>\n<td><span style=\"font-weight: 400;\">20 ton<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Control arm bushings and hubs, light gear work<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Mid daylight and width fit most car assemblies<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Strong balance of power and price<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Needs floor space and careful setup<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Home enthusiast and small shop<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Bearing splitter and press brake kit<\/span><\/td>\n<\/tr>\n<tr>\n<td><span style=\"font-weight: 400;\">50 ton<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Seized sleeves and thick plate forming<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Large daylight and wide throat for heavy assemblies<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Fast on stuck parts and versatile with tooling<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Larger footprint and stricter anchoring<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Pro shop and fleet or ag service<\/span><\/td>\n<td><span style=\"font-weight: 400;\">Heavy plates and guarded gauge kit<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p><span data-preserver-spaces=\"true\">Use ranges from your target models when you publish final specs. The point is to match the opening and width to the jobs you do most.<\/span><\/p>\n<h2><strong><span data-preserver-spaces=\"true\">FAQs<\/span><\/strong><\/h2>\n<p><strong><span data-preserver-spaces=\"true\">Q) What size shop press do I need for wheel bearings?<\/span><\/strong><\/p>\n<p><strong><span data-preserver-spaces=\"true\">A)<\/span><\/strong><span data-preserver-spaces=\"true\"> Most wheel bearings on passenger cars are a good fit for a 12-ton or a 20-ton press. Clean parts and straight setups move at 12 tons. Rusty hubs and stubborn sleeves favour 20-ton for clean, steady pushes.<\/span><\/p>\n<p><strong><span data-preserver-spaces=\"true\">Q) Is a 12-ton press enough for control arm bushings?<\/span><\/strong><\/p>\n<p><strong><span data-preserver-spaces=\"true\">A)<\/span><\/strong><span data-preserver-spaces=\"true\"> It is enough for many clean arms. If the arms are rusty or the sleeves are tight, you will work faster and safer with a 20-ton unit.<\/span><\/p>\n<p><strong><span data-preserver-spaces=\"true\">Q) Do I need air over hydraulic?<\/span><\/strong><\/p>\n<p><strong><span data-preserver-spaces=\"true\">A)<\/span><\/strong><span data-preserver-spaces=\"true\"> You will want it if you press parts often. Air power speeds the approach and reduces hand fatigue. Manual is fine for occasional use or small jobs.<\/span><\/p>\n<p><strong><span data-preserver-spaces=\"true\">Q) Bench press or floor press?<\/span><\/strong><\/p>\n<p><strong><span data-preserver-spaces=\"true\">A)<\/span><\/strong><span data-preserver-spaces=\"true\"> Bench units save space and fit small parts. Floor units give you more daylight and width<\/span><span data-preserver-spaces=\"true\">, so<\/span><span data-preserver-spaces=\"true\"> you can press larger assemblies with less disassembly.<\/span><\/p>\n<p><strong><span data-preserver-spaces=\"true\">How thick can I bend on a 20-ton press?<\/span><\/strong><\/p>\n<p><span data-preserver-spaces=\"true\"> It depends on the die width, material, and bend length. Follow the tooling chart for your brake kit and use a conservative setup on the first bends.<\/span><\/p>\n<p>&nbsp;<\/p>\n<h2><strong><span data-preserver-spaces=\"true\">Next Steps<\/span><\/strong><\/h2>\n<p><span data-preserver-spaces=\"true\">You now have a clear path:<\/span><\/p>\n<ul>\n<li><span data-preserver-spaces=\"true\">Pick <\/span><strong><span data-preserver-spaces=\"true\">12-ton<\/span><\/strong><span data-preserver-spaces=\"true\"> for <\/span><span data-preserver-spaces=\"true\">small<\/span><span data-preserver-spaces=\"true\"> bearings and light straightening<\/span><\/li>\n<li><span data-preserver-spaces=\"true\">Pick <\/span><strong><span data-preserver-spaces=\"true\">20-ton<\/span><\/strong><span data-preserver-spaces=\"true\"> for most car bushings and hubs<\/span><\/li>\n<li><span data-preserver-spaces=\"true\">Pick <\/span><strong><span data-preserver-spaces=\"true\">50-ton<\/span><\/strong><span data-preserver-spaces=\"true\"> for seized sleeves and heavy plate work<\/span><\/li>\n<\/ul>\n<p><span data-preserver-spaces=\"true\">Add thick <\/span><span data-preserver-spaces=\"true\">arbor<\/span><span data-preserver-spaces=\"true\"> plates and a bearing splitter first. Upgrade to a press brake kit when you can bend with control. Keep your setup centred, shielded, and measured on a readable gauge. If you want more details on the middle ground, read our<\/span><a class=\"editor-rtfLink\" href=\"https:\/\/www.redlinestands.com\/blog\/a-buying-guide-for-20-ton-shop-press-for-home-and-pro-use\/\" target=\"_blank\" rel=\"noopener\"><span data-preserver-spaces=\"true\"> buying guide for a 20-ton shop press<\/span><\/a><span data-preserver-spaces=\"true\">. For ideas on value and build quality, check<\/span><a class=\"editor-rtfLink\" href=\"https:\/\/www.redlinestands.com\/blog\/harbor-freight-shop-press-alternatives\/\" target=\"_blank\" rel=\"noopener\"> <span data-preserver-spaces=\"true\">Harbor<\/span><span data-preserver-spaces=\"true\"> Freight shop press alternatives<\/span><\/a><span data-preserver-spaces=\"true\">. To see how a strong press pays off in daily work, read<\/span><a class=\"editor-rtfLink\" href=\"https:\/\/www.redlinestands.com\/blog\/5-benefits-of-using-a-hydraulic-shop-press\/\" target=\"_blank\" rel=\"noopener\"><span data-preserver-spaces=\"true\"> 5 <\/span><span data-preserver-spaces=\"true\">benefits of using a hydraulic shop press<\/span><\/a><span data-preserver-spaces=\"true\">.<\/span><\/p>\n<p><span data-preserver-spaces=\"true\">When you are ready to choose, <\/span><a class=\"editor-rtfLink\" href=\"https:\/\/www.redlinestands.com\/catalog\/shop-equipment-c-327\/hydraulic-shop-press-c-327_548\/all-shop-presses-c-327_548_246\/\" target=\"_blank\" rel=\"noopener\"><span data-preserver-spaces=\"true\">browse our Shop Press lineup<\/span><\/a><span data-preserver-spaces=\"true\"> or reach out and tell us your top two jobs. We will match tonnage and tooling so you get clean, safe results on the first press.<\/span><\/p>\n","protected":false},"excerpt":{"rendered":"<p>You want a shop press matching your jobs, space, and budget. This guide compares 12-ton, 20-ton, and 50-ton shop presses clearly so you can pick with confidence. You will see what each size can do, the specs that matter, and the safety steps that protect you and your parts. TL;DR: Pick Your Capacity By Job&#8230;<\/p>\n","protected":false},"author":2,"featured_media":2006,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_lmt_disableupdate":"no","_lmt_disable":"no","footnotes":""},"categories":[88],"tags":[90],"class_list":["post-1997","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-shop-press","tag-shop-press"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.4 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>12-Ton vs 20-Ton vs 50-Ton Shop Press: How to Choose<\/title>\n<meta name=\"description\" content=\"Learn the difference between 12-ton, 20-ton, &amp; 50-ton shop presses. See jobs each handles &amp; safety tips so you choose the right shop press\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.redlinestands.com\/blog\/shop-press-12-20-50-ton-capacity-guide\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"12-Ton vs 20-Ton vs 50-Ton Shop Press: How to Choose\" \/>\n<meta property=\"og:description\" content=\"Learn the difference between 12-ton, 20-ton, &amp; 50-ton shop presses. See jobs each handles &amp; safety tips so you choose the right shop press\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.redlinestands.com\/blog\/shop-press-12-20-50-ton-capacity-guide\/\" \/>\n<meta property=\"og:site_name\" content=\"Redline Stands Blog\" \/>\n<meta property=\"article:published_time\" content=\"2025-10-27T16:51:02+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2025-10-27T17:42:26+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.redlinestands.com\/wordpress\/wp-content\/uploads\/2025\/10\/12-Ton-vs-20-Ton-vs-50-Ton-Shop-Press-Which-Capacity-Do-You-Need.png\" \/>\n\t<meta property=\"og:image:width\" content=\"1200\" \/>\n\t<meta property=\"og:image:height\" content=\"675\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"Nurul Afsar\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Nurul Afsar\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"8 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.redlinestands.com\\\/blog\\\/shop-press-12-20-50-ton-capacity-guide\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.redlinestands.com\\\/blog\\\/shop-press-12-20-50-ton-capacity-guide\\\/\"},\"author\":{\"name\":\"Nurul Afsar\",\"@id\":\"https:\\\/\\\/www.redlinestands.com\\\/blog\\\/#\\\/schema\\\/person\\\/90c742e3687dce68b57ef4a2f0bc73c2\"},\"headline\":\"12-Ton vs 20-Ton vs 50-Ton Shop Press: Which Capacity Do You Need?\",\"datePublished\":\"2025-10-27T16:51:02+00:00\",\"dateModified\":\"2025-10-27T17:42:26+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.redlinestands.com\\\/blog\\\/shop-press-12-20-50-ton-capacity-guide\\\/\"},\"wordCount\":1638,\"commentCount\":0,\"image\":{\"@id\":\"https:\\\/\\\/www.redlinestands.com\\\/blog\\\/shop-press-12-20-50-ton-capacity-guide\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.redlinestands.com\\\/wordpress\\\/wp-content\\\/uploads\\\/2025\\\/10\\\/12-Ton-vs-20-Ton-vs-50-Ton-Shop-Press-Which-Capacity-Do-You-Need.png\",\"keywords\":[\"shop press\u200b\"],\"articleSection\":[\"shop press\u200b\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.redlinestands.com\\\/blog\\\/shop-press-12-20-50-ton-capacity-guide\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.redlinestands.com\\\/blog\\\/shop-press-12-20-50-ton-capacity-guide\\\/\",\"url\":\"https:\\\/\\\/www.redlinestands.com\\\/blog\\\/shop-press-12-20-50-ton-capacity-guide\\\/\",\"name\":\"12-Ton vs 20-Ton vs 50-Ton Shop Press: How to Choose\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.redlinestands.com\\\/blog\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.redlinestands.com\\\/blog\\\/shop-press-12-20-50-ton-capacity-guide\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.redlinestands.com\\\/blog\\\/shop-press-12-20-50-ton-capacity-guide\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.redlinestands.com\\\/wordpress\\\/wp-content\\\/uploads\\\/2025\\\/10\\\/12-Ton-vs-20-Ton-vs-50-Ton-Shop-Press-Which-Capacity-Do-You-Need.png\",\"datePublished\":\"2025-10-27T16:51:02+00:00\",\"dateModified\":\"2025-10-27T17:42:26+00:00\",\"author\":{\"@id\":\"https:\\\/\\\/www.redlinestands.com\\\/blog\\\/#\\\/schema\\\/person\\\/90c742e3687dce68b57ef4a2f0bc73c2\"},\"description\":\"Learn the difference between 12-ton, 20-ton, & 50-ton shop presses. See jobs each handles & safety tips so you choose the right shop press\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.redlinestands.com\\\/blog\\\/shop-press-12-20-50-ton-capacity-guide\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.redlinestands.com\\\/blog\\\/shop-press-12-20-50-ton-capacity-guide\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.redlinestands.com\\\/blog\\\/shop-press-12-20-50-ton-capacity-guide\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.redlinestands.com\\\/wordpress\\\/wp-content\\\/uploads\\\/2025\\\/10\\\/12-Ton-vs-20-Ton-vs-50-Ton-Shop-Press-Which-Capacity-Do-You-Need.png\",\"contentUrl\":\"https:\\\/\\\/www.redlinestands.com\\\/wordpress\\\/wp-content\\\/uploads\\\/2025\\\/10\\\/12-Ton-vs-20-Ton-vs-50-Ton-Shop-Press-Which-Capacity-Do-You-Need.png\",\"width\":1200,\"height\":675,\"caption\":\"shop press\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.redlinestands.com\\\/blog\\\/shop-press-12-20-50-ton-capacity-guide\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.redlinestands.com\\\/blog\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"12-Ton vs 20-Ton vs 50-Ton Shop Press: Which Capacity Do You Need?\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.redlinestands.com\\\/blog\\\/#website\",\"url\":\"https:\\\/\\\/www.redlinestands.com\\\/blog\\\/\",\"name\":\"Redline Stands Blog\",\"description\":\"Makers of Quality Motorcycle Lift Stands and Garage Equipment.\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.redlinestands.com\\\/blog\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.redlinestands.com\\\/blog\\\/#\\\/schema\\\/person\\\/90c742e3687dce68b57ef4a2f0bc73c2\",\"name\":\"Nurul Afsar\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/c9f75fcf88732ea9c731108c9f8651f35a3450562c45fd6fad110850c04304f0?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/c9f75fcf88732ea9c731108c9f8651f35a3450562c45fd6fad110850c04304f0?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/c9f75fcf88732ea9c731108c9f8651f35a3450562c45fd6fad110850c04304f0?s=96&d=mm&r=g\",\"caption\":\"Nurul Afsar\"},\"sameAs\":[\"http:\\\/\\\/numinix.com\"],\"url\":\"https:\\\/\\\/www.redlinestands.com\\\/blog\\\/author\\\/numinix\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"12-Ton vs 20-Ton vs 50-Ton Shop Press: How to Choose","description":"Learn the difference between 12-ton, 20-ton, & 50-ton shop presses. See jobs each handles & safety tips so you choose the right shop press","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.redlinestands.com\/blog\/shop-press-12-20-50-ton-capacity-guide\/","og_locale":"en_US","og_type":"article","og_title":"12-Ton vs 20-Ton vs 50-Ton Shop Press: How to Choose","og_description":"Learn the difference between 12-ton, 20-ton, & 50-ton shop presses. See jobs each handles & safety tips so you choose the right shop press","og_url":"https:\/\/www.redlinestands.com\/blog\/shop-press-12-20-50-ton-capacity-guide\/","og_site_name":"Redline Stands Blog","article_published_time":"2025-10-27T16:51:02+00:00","article_modified_time":"2025-10-27T17:42:26+00:00","og_image":[{"width":1200,"height":675,"url":"https:\/\/www.redlinestands.com\/wordpress\/wp-content\/uploads\/2025\/10\/12-Ton-vs-20-Ton-vs-50-Ton-Shop-Press-Which-Capacity-Do-You-Need.png","type":"image\/png"}],"author":"Nurul Afsar","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Nurul Afsar","Est. reading time":"8 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.redlinestands.com\/blog\/shop-press-12-20-50-ton-capacity-guide\/#article","isPartOf":{"@id":"https:\/\/www.redlinestands.com\/blog\/shop-press-12-20-50-ton-capacity-guide\/"},"author":{"name":"Nurul Afsar","@id":"https:\/\/www.redlinestands.com\/blog\/#\/schema\/person\/90c742e3687dce68b57ef4a2f0bc73c2"},"headline":"12-Ton vs 20-Ton vs 50-Ton Shop Press: Which Capacity Do You Need?","datePublished":"2025-10-27T16:51:02+00:00","dateModified":"2025-10-27T17:42:26+00:00","mainEntityOfPage":{"@id":"https:\/\/www.redlinestands.com\/blog\/shop-press-12-20-50-ton-capacity-guide\/"},"wordCount":1638,"commentCount":0,"image":{"@id":"https:\/\/www.redlinestands.com\/blog\/shop-press-12-20-50-ton-capacity-guide\/#primaryimage"},"thumbnailUrl":"https:\/\/www.redlinestands.com\/wordpress\/wp-content\/uploads\/2025\/10\/12-Ton-vs-20-Ton-vs-50-Ton-Shop-Press-Which-Capacity-Do-You-Need.png","keywords":["shop press\u200b"],"articleSection":["shop press\u200b"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.redlinestands.com\/blog\/shop-press-12-20-50-ton-capacity-guide\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.redlinestands.com\/blog\/shop-press-12-20-50-ton-capacity-guide\/","url":"https:\/\/www.redlinestands.com\/blog\/shop-press-12-20-50-ton-capacity-guide\/","name":"12-Ton vs 20-Ton vs 50-Ton Shop Press: How to Choose","isPartOf":{"@id":"https:\/\/www.redlinestands.com\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.redlinestands.com\/blog\/shop-press-12-20-50-ton-capacity-guide\/#primaryimage"},"image":{"@id":"https:\/\/www.redlinestands.com\/blog\/shop-press-12-20-50-ton-capacity-guide\/#primaryimage"},"thumbnailUrl":"https:\/\/www.redlinestands.com\/wordpress\/wp-content\/uploads\/2025\/10\/12-Ton-vs-20-Ton-vs-50-Ton-Shop-Press-Which-Capacity-Do-You-Need.png","datePublished":"2025-10-27T16:51:02+00:00","dateModified":"2025-10-27T17:42:26+00:00","author":{"@id":"https:\/\/www.redlinestands.com\/blog\/#\/schema\/person\/90c742e3687dce68b57ef4a2f0bc73c2"},"description":"Learn the difference between 12-ton, 20-ton, & 50-ton shop presses. See jobs each handles & safety tips so you choose the right shop press","breadcrumb":{"@id":"https:\/\/www.redlinestands.com\/blog\/shop-press-12-20-50-ton-capacity-guide\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.redlinestands.com\/blog\/shop-press-12-20-50-ton-capacity-guide\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.redlinestands.com\/blog\/shop-press-12-20-50-ton-capacity-guide\/#primaryimage","url":"https:\/\/www.redlinestands.com\/wordpress\/wp-content\/uploads\/2025\/10\/12-Ton-vs-20-Ton-vs-50-Ton-Shop-Press-Which-Capacity-Do-You-Need.png","contentUrl":"https:\/\/www.redlinestands.com\/wordpress\/wp-content\/uploads\/2025\/10\/12-Ton-vs-20-Ton-vs-50-Ton-Shop-Press-Which-Capacity-Do-You-Need.png","width":1200,"height":675,"caption":"shop press"},{"@type":"BreadcrumbList","@id":"https:\/\/www.redlinestands.com\/blog\/shop-press-12-20-50-ton-capacity-guide\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.redlinestands.com\/blog\/"},{"@type":"ListItem","position":2,"name":"12-Ton vs 20-Ton vs 50-Ton Shop Press: Which Capacity Do You Need?"}]},{"@type":"WebSite","@id":"https:\/\/www.redlinestands.com\/blog\/#website","url":"https:\/\/www.redlinestands.com\/blog\/","name":"Redline Stands Blog","description":"Makers of Quality Motorcycle Lift Stands and Garage Equipment.","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.redlinestands.com\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/www.redlinestands.com\/blog\/#\/schema\/person\/90c742e3687dce68b57ef4a2f0bc73c2","name":"Nurul Afsar","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/c9f75fcf88732ea9c731108c9f8651f35a3450562c45fd6fad110850c04304f0?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/c9f75fcf88732ea9c731108c9f8651f35a3450562c45fd6fad110850c04304f0?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/c9f75fcf88732ea9c731108c9f8651f35a3450562c45fd6fad110850c04304f0?s=96&d=mm&r=g","caption":"Nurul Afsar"},"sameAs":["http:\/\/numinix.com"],"url":"https:\/\/www.redlinestands.com\/blog\/author\/numinix\/"}]}},"modified_by":"Nurul Afsar","jetpack_featured_media_url":"https:\/\/www.redlinestands.com\/wordpress\/wp-content\/uploads\/2025\/10\/12-Ton-vs-20-Ton-vs-50-Ton-Shop-Press-Which-Capacity-Do-You-Need.png","_links":{"self":[{"href":"https:\/\/www.redlinestands.com\/blog\/wp-json\/wp\/v2\/posts\/1997","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.redlinestands.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.redlinestands.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.redlinestands.com\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.redlinestands.com\/blog\/wp-json\/wp\/v2\/comments?post=1997"}],"version-history":[{"count":5,"href":"https:\/\/www.redlinestands.com\/blog\/wp-json\/wp\/v2\/posts\/1997\/revisions"}],"predecessor-version":[{"id":2005,"href":"https:\/\/www.redlinestands.com\/blog\/wp-json\/wp\/v2\/posts\/1997\/revisions\/2005"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.redlinestands.com\/blog\/wp-json\/wp\/v2\/media\/2006"}],"wp:attachment":[{"href":"https:\/\/www.redlinestands.com\/blog\/wp-json\/wp\/v2\/media?parent=1997"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.redlinestands.com\/blog\/wp-json\/wp\/v2\/categories?post=1997"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.redlinestands.com\/blog\/wp-json\/wp\/v2\/tags?post=1997"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}