Are there vibration isolators on the hydraulic motor?

No sir. Even in our premium brands like Challenger, iDeal, and Launch, we don't believe we've seen a lift of any brand that had this feature sir. Thanks for asking Nick!

What size hydraulic line does this lift use?

5/16th hose 5000 psi. Thanks Carter!

What is the dimensions between centerline of anchor bolts at each of the post's base plates? And what type of anchor bolts are used for each post?

I'm sorry but we do not have those dimensions. The lift comes with 3/4' RedHead style anchors. If you are thinking of predrilling your slab or forming your anchors into the slab, we advise you please not do this. We could give a 20 minute speech about what can go wrong causing you the regret this. We've seen it done, and it never ends well. You'll definitely want to drill your slab by running the hammer drill bit through the baseplates once the lift is already standing upright. Thanks Chase!

Triumph 11,000lb 2 Post Lift | 1 Year Parts Warranty

3.0 / 5 (1 review)

Based on 1 review Write review

Stan Jul 5, 2022

Not very well built
Jul 5, 2022

Most of the welds seem like they were not welded by a professional. Also there is lots of stuff thats not square. One of my post base plates was over a 1/4 of an inch out of square with the actual post which made it difficult to get square and plum with the other post. Most of the metal stops that are welded to the inside of the post are not square either. One of the hydraulic rams was not bolted down tight and i can see where it jiggled around in shipping. I think the lift will be fine since im only working on my own cars but i would not recommend for an actual shop.