Website Feedback

Email:

Add your email address to take a quick survey and receive $10.00 off your next order!

0

Redline 30 Ton Air Hydraulic Shop Press

Model: RE30T-A

(1 review)

Optional Accessories


Include Rear Facing Guard


Redline RE-AR 3/8" Air Hose Reel


Pin Press Kit


SMC 1/4" Lo-Flow Water Separator


Shop Press Foot Pedal
Brand
Type

Shipping upgrades offered in cart page

$1,649.50

Description

This industrial Redline 30 ton hydraulic shop press is an air over hydraulic pressing machine perfect for manufacturing, auto repair, or general mechanical work. Standard features include a tonnage gauge, capability to move the ram cylinder from left to right, a pump capable of manual operation, and 9 different height adjustments for both small and large projects. An optional winch system is also available to make raising and lowering the carriage a breeze. Included with this press is a shop press safety guard that reduces the possibility of an object flying out under pressure and hitting the operator. Order your new 60,000 pound capacity hydraulic shop press today from Redline Engineering!

KEY BENEFITS
• CE Certified
• 30 ton capacity
• Powder coated finish
• Optional carriage winch system
• 9 height adjustments of 4.5" increments
• 40.5" movement of carriage up and down
• Ram cylinder capable of shifting both left and right   
• Pressure gauge accurate +/- 2.5% of press capacity

PRESS PLATE RATING
• Each press plate is rated to ½ the tonnage of the press; thus, if applying the press’ maximum force, the load must be distributed over both press plates to avoid damaging the press

Show more

Specs

• Hose length 50"
• Leg length 27.5"
• Handle length 26"
• Cylinder stroke 5.9"
• Inside frame width: 21"
• Main frame is 3" x 0.42"
• Press plates: 8-1/8" x 5-1/8"
• Interior carriage width: 6-9/16"
• Interior carriage length: 14"
• Pump fluid volume: 47.3 fl oz.
• Internal cylinder diameter: 3.15"
• Operates at a 75dB sound rating
• Piston retraction time: 41 seconds
• Maximum pump pressure: 8485 PSI
• Pressure gauge accurate to +/- 2.5%
• Air motor requires 7 CFM of air supply
• Cylinder piston/bore diameter: 2.75"
• Total length with pump + winch: 45"
• Air pump full range without load: 104 seconds
• Approximate number of pumps to full range without load: 62
• Overall dims 31.5" L x 27.5" W x 72" H (without pump attached)

Downloads

• Download the manual pdf HERE

Shipping

• Residential deliveries cost extra
• Ships 456 lbs. at 31" W x 8" H x 75" L
• Ships to commercial location w/ forklift
• Units available in Pensacola, FL with rebate
• Pensacola, FL pickups – read our policies HERE
• Free shipping applies to $200 maximum. If shipping exceeds this amount a surcharge may be needed

 

Videos

Reviews

5.0 / 5 (1 review)
Based on 1 review Write review
  • tony Sep 15, 2023

    30 ton shop press

    Sep 15, 2023
    great quality , work great, quick arrive thanks redline

Ask & Answer

  • ram Jul 07, 2022
    Q. does it have a Included punch sets as standard included? Is the ram end is screw adjustable?
    A. No sir. The pin kit is optional, and the ram end just secures in place with a set screw. It's not screw adjustable or anything like that. Thanks for your question!
  • Don70 Feb 09, 2022
    Q. How big of of an air compressor needed to run the press? I was looking at it for a forge press.
    A. You'll need about 90 psi at 7 cfm to maintain continuous operation. Thanks Don!
  • adh Jul 20, 2021
    Q. I am looking at this unit to use for pressing bearings off and onto shafts. One of my search criteria is I need to know what kind of maintenance, and how easily I would be able to find parts for this press. It would be implemented in a shop, so it would be used relatively frequent.
    A. Right, so a quick search on our site for "30T" will yield a lot of results for common replacement parts we already stock, such as pumps, cylinders, seal kits, etc. In terms of maintenance, there's really not much to do. We recommend occasionally putting a few drops of air tool oil into the air line that feeds the pump, but this is really just good maintenance on any air-operated tool and is not specific to the 30T press. Thanks!

ASK A “PUBLICLY POSTED” QUESTION

You need to be logged to vote.



  1. Home
  2. Shop Equipment
  3. Hydraulic Shop Press
  4. All Shop Presses
  5. Redline 30 Ton Air Hydraulic Shop Press

Free shipping only applies to products that are marked "free shipping" or "ships free" in the title. Freight ship items have a predetermined max amount that can be spent under our free shipping policy. In the event you reside in an unusually high cost shipping zip code we may alert you that a shipping surcharge may be necessary.

Click OK to view our full shipping policy. Clicking cancel will keep you on the current page.

Search Cart Quote Facebook eBay YouTube Menu Menu