How would Air supply be hooked up to this gun

The barb fitting on the back of the gun is the air inlet. You will use a 1/2' ID air hose to run from the foot pedal to that barb fitting. The barb fitting on the bottom of the gun is where your media hose will connect. Thanks for reaching out Frank!

What is the CFM requirement for this gun?

You're looking at 18-24 CFM. I can tell you from personal experience that my 5hp 17 CFM cabinet at home does a pretty decent job of running it with a 7mm nozzle. Thanks for your question!

What size thread is the black piece in the back of the gun. Is that an AN fitting?

We asked our supplier and were told they were 16 x 1.5 Definitely metric. Thanks!

I'm interested in sandblasting glazed pottery, not to remove the glaze but to alter it from glossy to satin or matte. What equipment and media would you suggest? Max size is 2' x 2' 3'. Thanks!

We’d recommend our RE70 media blast cabinet. You’ll soon find out that just because an object “fits” inside a cabinet doesn’t necessarily mean you have “room” to blast it. Blast cabinets truly are the epitome of bigger is better. As for the media, that's hard to say as we have no experience blasting pottery. I'd probably try plastic bead first. Maybe walnut shell as well. THIS VIDEO might help to educate you on the different types of media and which ones to try first. Thanks for your question!

I have an outdoor cast iron fountain 8'tall by 4'wide. A very detainled floral iron casting I want to remove several layers of paint. What is your recomendation?

I would use either THIS or THIS . Be prepared to lay a giant tarp underneath it so you can collect your used media. You can always sift it through a wire screen in order to reuse it. If the paint is really thick, consider going over it first with a needle scaler to get the bulk off of it.

Ships free

RE48/70 & 48CS/49/270 Sand Blast Cabinet Replacement Gun

Move your mouse over image or click to enlarge

Ships free

Jenessco Industries Sand Blast Cabinet Replacement Gloves $59.95

Ships free

Redline RE22 Sand Blast Cabinet Replacement Gun $59.95

Ships free

Redline Sand Blast Cabinet Air Blow Gun Kit $59.95

Ships free

Redline RE48/70 Sand Blast Cabinet Boron Carbide Nozzle $59.95

Ships free

Redline REPP70 Sand Blast Cabinet Replacement Vacuum Hose $59.95

Ships free

Redline RE22 Replacement Air Pressure Regulator $59.50

RE48/70 & 48CS/49/270 Sand Blast Cabinet Replacement Gun

Model: RE48/70-Gun

(1 review)

Optional Accessories

Pack of 4 Nozzles ( +$19.95 )

Brand

Redline Engineering

$59.95

This is the factory Redline OEM RE48/70, RE48CS/49/270 replacement sand blasting gun. This high quality gun features cast aluminum construction, easily replaceable ceramic nozzle, and is universal enough to be used in most any sand blast cabinet. Order yours today!

KEY BENEFITS
• Cast aluminum construction
• Single 6mm ceramic nozzle included
• Factory replacement for RE48, RE70, RE48CS, RE49, RE270 cabinets

ALSO FITS
• Eastwood B100
• Grizzly G0708
• AllSource 41500, 41800, and 41200
• Atlas SBC990, SBC420, and SBC1200XL

• 18-24 cfm
• Inside diameter of hose: 1/2"
• Single 6mm ceramic nozzle included

• FREE SHIPPING

Ships free

Jenessco Industries Sand Blast Cabinet Replacement Gloves $59.95

Ships free

Redline RE22 Sand Blast Cabinet Replacement Gun $59.95

Ships free

Redline Sand Blast Cabinet Air Blow Gun Kit $59.95

Ships free

Redline RE48/70 Sand Blast Cabinet Boron Carbide Nozzle $59.95

Ships free

Redline REPP70 Sand Blast Cabinet Replacement Vacuum Hose $59.95

Ships free

Redline RE22 Replacement Air Pressure Regulator $59.50

Reviews

5.0 / 5 (1 review)

Based on 1 review Write review

Bill w Eoff Dec 5, 2019

fixitman
Dec 5, 2019

very good i like you telling like it is i have blasted with everything you can thank of play sand cheep garnet media seems best to me i use a fish cooker with pot to get moisture out of my cheap sand

Ask & Answer

Frank Mar 16, 2023

Q. How would Air supply be hooked up to this gun
A. The barb fitting on the back of the gun is the air inlet. You will use a 1/2" ID air hose to run from the foot pedal to that barb fitting. The barb fitting on the bottom of the gun is where your media hose will connect. Thanks for reaching out Frank!
Rick Nov 18, 2022

Q. What is the CFM requirement for this gun?
A. You're looking at 18-24 CFM. I can tell you from personal experience that my 5hp 17 CFM cabinet at home does a pretty decent job of running it with a 7mm nozzle. Thanks for your question!
Pick’s fab May 27, 2022

Q. What size thread is the black piece in the back of the gun. Is that an AN fitting?
A. We asked our supplier and were told they were 16 x 1.5 Definitely metric. Thanks!
Potter Apr 18, 2022

Q. I'm interested in sandblasting glazed pottery, not to remove the glaze but to alter it from glossy to satin or matte. What equipment and media would you suggest? Max size is 2' x 2' 3'. Thanks!
A. We’d recommend our RE70 media blast cabinet. You’ll soon find out that just because an object “fits” inside a cabinet doesn’t necessarily mean you have “room” to blast it. Blast cabinets truly are the epitome of bigger is better. As for the media, that's hard to say as we have no experience blasting pottery. I'd probably try plastic bead first. Maybe walnut shell as well. THIS VIDEO might help to educate you on the different types of media and which ones to try first. Thanks for your question!
Gregory Oct 03, 2021

Q. I have an outdoor cast iron fountain 8'tall by 4'wide. A very detainled floral iron casting I want to remove several layers of paint. What is your recomendation?
A. I would use either THIS or THIS. Be prepared to lay a giant tarp underneath it so you can collect your used media. You can always sift it through a wire screen in order to reuse it. If the paint is really thick, consider going over it first with a needle scaler to get the bulk off of it.