Will the TC500M gouge or scratch up aluminum rims or will they somehow be protected?

The plastic duckhead inserts are what protects the wheel. With that said, we recommend getting yourself an aluminum wheel and tire you don't care about and learn to use the machine on a throw-away wheel and tire. You're certain to learn the right and wrong way to do it as you develop your method. Thanks for shopping with us!

Can this change the motor and non motor tires for escooters? Are there additional tools/clamps that need to be purchased to handle those small tires

This machine, nor any of the powered machines we sell, are able to be used for changing solid e-scooter tires. There are special tire irons made for that purpose, but we do not sell them. Thanks for shopping with us!

Can a motorcyle rim with dual brake rotors fit on this, without removing the rotors? Or have a single rotor facing down with out hitting turntable.

Assuming you buy the motorcycle adapters, we don't see that being any problem. With that said, please understand we do not know exactly which tire/wheel you're talking about, and we haven't tested every manufacturer's motorcycle tire/wheel on this machine, so while we're confident, there's always the tiniest chance we're wrong, at which point you'd have to remove the rotor. Thanks for shopping with us Dan!

i just sent an email what i need to know is will the feet open up wide enough to grab a 20 inch wheel from the outside its a chevy 6 lug 275 55 20 tire and 20 inch wheel and my motorcycle tire is 19 inches and would have to be able to be held on the outside as well its a custom hrome wheel thnk you very much

Yes sir. Our posted spec says outside rim clamping min 8' to max 28' Thanks for shopping with us David.

Can the TC500M handle a 235/85 truck tire? I'm tracking the rim diameter being 16 inches is fine, more concerned about the outer diameter. Thanks

The TC500M can handle tires up to a maximum of 36' in diameter. Thanks for your question Josh!

Redline TC500M Motorcycle & Automotive Manual Tire Changer

Move your mouse over image or click to enlarge

Triumph NTC-950 Auto & Motorcycle Tire Changer

$2,649.99

Titan XL Tool 49" Automotive and Motorcycle Tire Changer $2,719.99

K&L Supply MC680 Motorcycle Tire Changer $2,719.95

Kernel Automotive TC530 Tire Changer $2,539.99

Kernel TC-400M-B Motorcycle Tire Changer $2,279.99

Kernel Automotive TC430 Economy Tire Changer $2,159.99

Redline TC500M Motorcycle & Automotive Manual Tire Changer

Model: TC500M

(3 reviews)

Please Choose:

Optional Accessories

3 Piece Tire Iron Kit ( +$39.95 )

17" Ultimate Tire Iron ( +$44.95 )

Rim Saver/Wheel Protectors ( +$28.95 )

Tire Tamer Tool ( +$79.50 )

Motorcycle & ATV Riser Adapters ( +$199.50 )

Pit Posse 1 Quart Tire Mounting Lube ( +$34.99 ) - out of stock

3 Piece Tire Iron Kit

17" Ultimate Tire Iron

Rim Saver/Wheel Protectors

Tire Tamer Tool

Motorcycle & ATV Riser Adapters

Pit Posse 1 Quart Tire Mounting Lube

Brand

Redline Engineering

Please Confirm

Shipping upgrades offered in cart page

$999.50

In Stock in

Pensacola

Usually Ships Within

24-48 Hrs

Looking to change both motorcycle and automotive tires and wheels? Introducing the new Redline TC500M manual tire changing machine. This unit is perfect for the home enthusiast looking to change tires without all the expense of a powered changer. By removing tons of complicated and expensive motors and pneumatic valves, the TC500M simplifies the tire changing machine down to a much more reliable workstation with less parts to break. It features a fully adjustable built-in bead breaker capable of tires from small to large plus adjustable clamping feet that handle wheels of many different sizes. Order your manual tire changer today and forget about over complicated machinery!

Not for dome-style dually truck wheels/tires

Adapters remove the ability for the clamps to hold the wheel from the inside

KEY BENEFITS

• Covered by Redline's 1-Year parts warranty

MAX DIAMETER

• Machine CANNOT change tires larger than 36" diameter regardless of wheel size

• Turn table 22"

• Arm pivots 90 degrees

• Max tire diameter: 36"

• Assist bar to turn table 36"

• Turn table height from floor 25"

• Overall dims: 48" x 37" x 77-1/4"

• Handles wheels as wide as 11.81"

• Arm length (front to pivot point) 20.5"

• Outside rim clamping min 8" to max 28"

• Total height excluding adj top bar 55.75"

• Inside rim clamping from min 10" to max 27"

• With optional riser adapters installed: 5" - 17" wheel size

• Shipping weight 357 lbs

• Net machine weight – 271 lbs

• Shipping dims L 46" x W 27" x H 37" Class 77

• Non 48 states customers must call in order

• Residential deliveries w/ lift gate cost extra

• Ships to commercial location with forklift

• $150 rebate for picking up in Pensacola, FL

• Pensacola, FL pickups – read our policies HERE

• Free shipping applies to $200 maximum. If shipping exceeds this amount a surcharge may be needed

Triumph NTC-950 Auto & Motorcycle Tire Changer

$2,649.99

Kernel Automotive TC950WPA HD Tire Changer with LPA $4,119.99

K&L Supply MC680 Motorcycle Tire Changer $2,719.95

Kernel Automotive TC950 Heavy Duty Tire Changer $2,819.99

Titan XL Tool 49" Automotive and Motorcycle Tire Changer $2,719.99

Kernel Automotive TC1300 Leverless Tire Changer LPA $6,499.99

Reviews

4.7 / 5 (3 reviews)

Based on 3 Reviews Write review

David Soma Dec 18, 2024

I can’t wait to use my new tire changer!
Dec 18, 2024

I will have to update this after I change a motorcycle tire with my Redline manual changer. I am a retired machinist that is so tired of changing MC tires with levers. I just uncrated and assembled this device and am stoked! It is really well made! The turntable and the clamping jaws move so smoothly. Just perfect!
Dan Kunde Jan 2, 2024

A great Tire Changer at a great price
Jan 2, 2024

We bought this tire changer because we didn't want to have to buy an expensive piece of equipment AND upgrade our air compressor capacity. This tire changer was perfect! Our previous tire machine would only allow us to change up to 15" tires. The TC500M works great for all our needs. The tubular metal arm that rotates the deck and works the bead breaker could be better constructed (ours bent) but other than that the TC500M has been a welcome addition to our workshop. The price was great and the customer service was great too!
S. Phipps Nov 21, 2019

TC500M Tire changer, fast delivery and well made
Nov 21, 2019

I couldn't be happier with the TC500M tire changer I ordered. Delivery was fast with no shipping damage due to a strong shipping crate and the tire changer was surprisingly well built. It included (4) sets of plastic pads for the mounting head, a set of pads for the clamp jaws as well as one on the bead breaker. Even the included tools were better quality than I was expecting. I have used it several times now and it is rigid enough that even 45 series tires don't pull the mounting head into the rim. Great service, fast shipping and much better quality than anticipated.

Ask & Answer

The Beard Jul 20, 2024

Q. Will the TC500M gouge or scratch up aluminum rims or will they somehow be protected?
A. The plastic duckhead inserts are what protects the wheel. With that said, we recommend getting yourself an aluminum wheel and tire you don't care about and learn to use the machine on a throw-away wheel and tire. You're certain to learn the right and wrong way to do it as you develop your method. Thanks for shopping with us!
Saratan Jul 16, 2024

Q. Can this change the motor and non motor tires for escooters? Are there additional tools/clamps that need to be purchased to handle those small tires
A. This machine, nor any of the powered machines we sell, are able to be used for changing solid e-scooter tires. There are special tire irons made for that purpose, but we do not sell them. Thanks for shopping with us!
Dan May 14, 2024

Q. Can a motorcyle rim with dual brake rotors fit on this, without removing the rotors? Or have a single rotor facing down with out hitting turntable.
A. Assuming you buy the motorcycle adapters, we don't see that being any problem. With that said, please understand we do not know exactly which tire/wheel you're talking about, and we haven't tested every manufacturer's motorcycle tire/wheel on this machine, so while we're confident, there's always the tiniest chance we're wrong, at which point you'd have to remove the rotor. Thanks for shopping with us Dan!
David Mar 05, 2024

Q. i just sent an email what i need to know is will the feet open up wide enough to grab a 20 inch wheel from the outside its a chevy 6 lug 275 55 20 tire and 20 inch wheel and my motorcycle tire is 19 inches and would have to be able to be held on the outside as well its a custom hrome wheel thnk you very much
A. Yes sir. Our posted spec says outside rim clamping min 8" to max 28" Thanks for shopping with us David.
Josh Feb 21, 2024

Q. Can the TC500M handle a 235/85 truck tire? I'm tracking the rim diameter being 16 inches is fine, more concerned about the outer diameter. Thanks
A. The TC500M can handle tires up to a maximum of 36" in diameter. Thanks for your question Josh!