5.0 / 5 (5 reviews) Based on 5 Reviews Write review Vincent Dorsey Dec 6, 2023 Perfect fit Dec 6, 2023 This was used as a replacement to the original pump to a Harbor Frieght lift. I got lucky and found I have a direct switch. No issues in changing it out. Just should have bought the hoses along with it. Dave Tucker Jan 27, 2023 Converted HF hydraulic lift to air over hydraulic Jan 27, 2023 Thanks Redline for providing me with a direct replacement for my HF motorcycle lift! The only modification I had to make was to the manual pump linkage alignment, which was very simple using a spacer and bolt to offset the linkage. NO WELDING necessary! There was no need to buy the 1" round stock as I used the existing 1" pivot rod stock from the old pump. The conversion took maybe an hour. Chad Confer Jan 15, 2023 Upgraded central pneumatic HF lift Jan 15, 2023 Fit perfect! A little adjustment on the manual pump lever was all I had to modify. You will need a 1in dia x 13in long pin to install. Cut in half for the pins. GTG! FROM REDLINE STAFF: We suspect this customer is talking about installing this pump on a different table, such as a Harbor Freight table, but we cannot be sure as he does not specify. Given that this pump is a direct bolt-in replacement on a Redline LD1K lift with no modification needed, we're certain this customer has not installed this pump into the Redline LD1K.