Website Feedback

Email:

Add your email address to take a quick survey and receive $10.00 off your next order!

0

Redline RL135 / SD1K Lift Jack Cradle Dolly Combo

Model: RL135-SD1K-C

(1 review)

Brand

Shipping upgrades offered in cart page

$448.95

Description

This Redline Engineering RL135 / SD1K Lift Jack Cradle Dolly Combo is like two peas in a pod! Use the RL135 to easily lift up your ATV or motorcycle, then roll your SD1K underneath so you can move your project around at your leisure. The RL135 features multiple lock positions and a 1250 lb. lifting capacity while the SD1K can be adjusted to your liking while holding a 1000 lb. weight capacity. Order yours today!

RL135 KEY BENEFITS
• 6 position safety locks
• Compact for easy storage
• Lifting capacity 1250 lbs
• Powder coated finish resists rust

SD1K KEY BENEFITS
• 1000 lb capacity
• Rubber pads protect frame
• 4 tie down pionts for stability
• Fully welded heavy-duty steel frame construction
• Easily move your bike around your shop with 360 degrees of mobility

Show more

Specs

RL135
• Max lift height 15"
• Collapsed height 4-1/2"
• Lifting arms are 7-1/2" apart
• Lifting arms are 13-1/8" long and 2-3/4" wide
• Dimensions (w/o handle): 32"L x 15-3/4”W x 14-1/2"

SD1K
• Min height: 11.8"
• Max height: 14.9"
• 3" diameter wheels
• Base measures 20" L
• 1/8" thick tubing steel
• Pads measure 2" W x 14" L
• Internal adjustabler width: 11.8" - 18.1"
• Three height settings at 11.75" / 13.5" / 15"

 

Shipping

• RL135 ships 66 lbs. at 33" x 16" x 5"
• SD1K ships 31 lbs. at 21" x 19" x 9"

Videos

Reviews

5.0 / 5 (1 review)
Based on 1 review Write review
  • Reed Dec 23, 2023

    Great Jack and Stand Combo Kit

    Dec 23, 2023
    I have a 2014 HD Street Glide and a 1993 HD Fatboy, both lowered 1-1/2 to 2". The jack fits easily when I pull the bikes very slightly towards the upright position while sliding the jack underneath. No doubt it will slide under a stock height bike. Very smooth operation and I love the way it "slowly" lowers the bikes. The stand is awesome! Fits both bikes easily and VERY sturdy. I would highly recommend this to anyone looking for a jack and/or stand.

Ask & Answer

  • George Feb 05, 2024
    Q. Do you have a locking caster option on the dolly SDK1? What is the load rating of the casters that come with it?
    A. The SD1K has a 1,000 lb capacity, so the casters are rated at 250 lbs each. We do not offer locking casters, but I'm sure you could easily source those from www.McMaster.com Thanks George!
  • George Feb 05, 2024
    Q. How is the dolly lift support spacing set?
    Continuous slide, or finite bolt holes?
    I need to know the exact internal spacing options between supports, and the width of each support. I need this to determine which method I need to choose for lifting the bike so that I can slide the dolly under, and not run out of room (front to back of the bike frame that needs to be supported.
    A. We have added additional photos to this listing that contain dimenisons for your viewing. If you need more dims, please reach out and we'll get them. It's a continuous slide system with pinch bolts, so the number of widths it can be set is extensive. Thanks George!
  • PJLinMI Aug 28, 2023
    Q. I have a 2019 Road Glide CVO? Any issues with this bike using the SDK1 Kit? If unsure, is there a return policy?
    A. Assuming you've looked underneath your bike and determined that the lift arms will have a sufficient location to lift from under the frame, then we see no issue with it. I would advise though, that you make certain this is what you want before ordering. These things are very heavy and inexpensive. If you ordered and returned this kit, the shipping going in both directions, plus a 20% restocking fee, would likely result in the vast majority of your refund being retained by UPS. It's not an item we would ever recommend returning due to the cost of shipping. Thanks for shopping with us!
  • Fred Aug 07, 2023
    Q. Will the RL135 fit a 2023 Indian Pursuit ? Do I need any special item so as not to damage the pipes
    A. Maybe. You really need to measure your bike's ground clearance and length/width of your frame cradle to be sure the RL135 is short enough to get under the bike, and from there, that it has ample space for the arms to lift from the frame. My apologies, but this inspection must be done by the customer. We'd love to answer your question with a simple "yes" or "no" but that's not something we can do given the huge number of motorcycles that this lift will potentially work. Thanks!
  • Two Tz Sep 19, 2022
    Q. Will this jack work with a Harley Davidson 1958-1964 swing arm frame. Stock single side exhaust (1959 to be exact).... If so I think this jack is what I'm looking for.... please let me know asap..... buying a jack this week.. Thanks T......
    A. Probably, but we have to say "probably" because honestly, we're not familiar with 1958 Harleys. That bike is just too uncommon to have seen one in person in recent years. At the end of the day, we have to rely on the customer to inspect under his motorcycle, reference the lift's specs posted to our site, and determine for himself if it's going to work. My apologies I cannot be more definitive. Thanks for shopping with us!

ASK A “PUBLICLY POSTED” QUESTION

You need to be logged to vote.



  1. Home
  2. Lifts
  3. Motorcycle & ATV Lifts
  4. ATV & Cycle Jacks
  5. Redline RL135 / SD1K Lift Jack Cradle Dolly Combo

Free shipping only applies to products that are marked "free shipping" or "ships free" in the title. Freight ship items have a predetermined max amount that can be spent under our free shipping policy. In the event you reside in an unusually high cost shipping zip code we may alert you that a shipping surcharge may be necessary.

Click OK to view our full shipping policy. Clicking cancel will keep you on the current page.

Search Cart Quote Facebook eBay YouTube Menu Menu