What's the thread size/pitch in the event I need to make them extend longer or purchase a jam nut to lock them in place once fitted?

It is M18 x 2.5 Thanks for shopping with us John!

I have a 1968 chevelle I’m restoring would they work

You'd need to double check the distance between the mounting points in the door jams and reference them against our posted specs, but I'd be surprised if not. Thanks Leo.

will these work ona 67 GTO convertible? Are two braces used per side? where/how do the attach?

Due to the inherently weak nature of convertibles we do not recommend using these door bars or any other on a convertible. Please consider custom fabricating something very strong to mount to the upper hinge and striker. With that said, this is the minimu you should do. We highly recommend a square tubing endoskeleton to keep the car geometrically sound. Please understand convertibles are the weakest of the weak. You can skimp-out with the bare minimum here, but when you've applied an expensive paint job and you discover your windshield no longer fits your convertible, it won't be funny. I hope this helps. Thanks for shopping with us Jerry!

I am restoring a 65 chevelle, 2 Door hard top. Will these braces fit?

We feel pretty confident they would, but to be honest you need to take the collapsed length of 45' and extended length of 68', measure your door's mounting points, and determine for sure that your car falls within these two distances. Thanks Tim!

Hello, I’m getting ready to mount the body of my 1977 Trans am with Hurst T-Tops to one of your rotisseries. Doors are removed and the door Striker is removed, leaving only the Stryker threaded hole to mount to. The distance is 54” from styler mounting surface to door hinge mounting surface. Will these door bars work for my application? I ask because you have a pic stating not recommended for post style door strikers.

Would you please send some pictures of your mounting surfaces to sales@redlinestands.com We'd like to see and inspect your situation before giving you bad information. Thanks Sam!

Ships free

Move your mouse over image or click to enlarge

Ships free

Redline ROT3000-LD Balancing ACME Screw With Bearings $79.95

Ships free

Redline ROT3000-LD Automotive Rotisserie Gear Drive Box $249.50

Ships free

Redline Uni-Body Rotisserie Brackets $89.95

Ships free

Auto Twirler Mopar 1968-70 B Body Rear Leaf Spring Brackets $239.95

Ships free

Auto Twirler Mopar 1968-70 E Body Rear Leaf Spring Brackets $219.95

NewShips free

Redline ROT3000-LD Replacement Hardware Kit $69.95

Redline Auto Body Door Frame Braces

Model: RED-BCS

Please Choose:

Brand

Redline Engineering

$159.95

In Stock in

Pensacola

Usually Ships Within

24-48 Hrs

Rotisserie door brace bars are essential to any rotisserie restoration. These universal telescoping braces will help insure your restoration goes smoothly. Comes in a set of 2. Order yours today!

KEY BENEFITS
• Collapsed 45"
• Extended 68"
• Steel construction is rigid
• Universal fits strengthens body
• Powder coated finish looks great
• Non-counter rotating threads are available at a discounted price

• Diameter: 1-3/4"

• Ships 22 lbs. at 45" x 7" x 3"
• Item ships for free when purchased with rotisserie
• Free local pickup in Cleburne, TX & Pensacola, FL

Ships free

Redline Rotisserie Mounting Arm Bracket Kit $149.95

Ships free

Auto Twirler Mopar Front Mounting Brackets $139.95

Ships free

Redline Automotive Rotisserie Stabilizer Leg Set $169.95

Ships free

Redline Rotisserie Balancing Kit - Sold as Pair

$169.95

Ships free

Auto Twirler Universal Leaf Spring Brackets $139.95

Ships free

Auto Twirler Rotisserie Rear Camaro Mounting Bracket $179.95

Reviews

Be the first: write a review.

Ask & Answer

john Jul 20, 2024

Q. What's the thread size/pitch in the event I need to make them extend longer or purchase a jam nut to lock them in place once fitted?
A. It is M18 x 2.5 Thanks for shopping with us John!
LeoSteel Dec 30, 2023

Q. I have a 1968 chevelle I’m restoring would they work
A. You'd need to double check the distance between the mounting points in the door jams and reference them against our posted specs, but I'd be surprised if not. Thanks Leo.
Jerry Mar 06, 2023

Q. will these work ona 67 GTO convertible? Are two braces used per side? where/how do the attach?
A. Due to the inherently weak nature of convertibles we do not recommend using these door bars or any other on a convertible. Please consider custom fabricating something very strong to mount to the upper hinge and striker. With that said, this is the minimu you should do. We highly recommend a square tubing endoskeleton to keep the car geometrically sound. Please understand convertibles are the weakest of the weak. You can skimp-out with the bare minimum here, but when you've applied an expensive paint job and you discover your windshield no longer fits your convertible, it won't be funny. I hope this helps. Thanks for shopping with us Jerry!
Tim Jan 03, 2022

Q. I am restoring a 65 chevelle, 2 Door hard top. Will these braces fit?
A. We feel pretty confident they would, but to be honest you need to take the collapsed length of 45" and extended length of 68", measure your door's mounting points, and determine for sure that your car falls within these two distances. Thanks Tim!
Sam Dec 19, 2021

Q. Hello, I’m getting ready to mount the body of my 1977 Trans am with Hurst T-Tops to one of your rotisseries. Doors are removed and the door Striker is removed, leaving only the Stryker threaded hole to mount to. The distance is 54” from styler mounting surface to door hinge mounting surface. Will these door bars work for my application? I ask because you have a pic stating not recommended for post style door strikers.
A. Would you please send some pictures of your mounting surfaces to [email protected] We'd like to see and inspect your situation before giving you bad information. Thanks Sam!