Will the lawn mower attachment fit a Bendpak 10AP lift?

We're confident it will work. With that said, understand your wheelbase of the vehicle you're trying to lift will determine how well it will work. For example, if the wheelbase causes this product to sit on the transition joint of the triple stage arms, then you might have to implement some sort of homemade shims to insure our kit sits flush on your lift. At the end of the day, we are not a BendPak dealer and cannot make any promises, so it's up to the customer to carefully inspect our posted dimensions, and the customer's lift, to determine if it will work. We hope this helps. Thanks Gary.

I have a 2 post Tuxedo asymmetrical lift, looking to use this for can am Spyder, zero turn lawn mower, golf cart...will this work and is it on back order and what is the final shipped price?

Will it work? Likely, yes. Tuxedo makes many lifts, so we recommend contacting our sales staff with your model number so we can say for sure. Will it work with your golf cart, zero turn, and Spyder? Probably, but again, those things come in many different wheel bases, so it's impossible to say with such little information. Is it on backorder? No sir; these are in stock and ready to ship as of 9/5/24. What is the final shipped price? Again, we cannot say because we do not know what state you reside, nor what type of location the carrier is to deliver. Is there a forklift on site, or does the carrier need to unload it for you via lift gate? Again, all of these variables affect cost, so with such little inforation, we cannot quote a price. Please reach out to us; we'll have a good many questions before we can accurately quote you. Thanks for shopping with us!

Will this fit on a Triumph NT-15?

We cannot see it being any issue sir.

Will it fit properly on my atlas PV10PX

This is difficult for us to say because as we look at pictures of the PV10PX online, the photos of the arms are not consistent. Some show the arms with long angular braces that would present a problem, while other pictures show something different. We recommend you shoot some photos of your actual lift and email them to us so we can try to make a more educated decision. Thanks for shopping with us Jeff!

Will this work with a Challenger VLE10 or a LE10 2 post lift?

Looking at the VLE10 on our website, I can see that one of the two arms triple telescopes. This creates several step-down areas of the arm, giving the adapter less space to sit flush on a flat surface. If that happens, you might find yourself using wood shims atop the triple arm in order to allow our adapter to sit completely flush and flat. Can it be done? Sure. Will you run into an issue and have to solve it? Possibly. I hope this helps. Thanks Chris.

Redline 2 Post Lift Lawn Mower Attachment

Move your mouse over image or click to enlarge

Redline 2 Post Lift Lawn Mower Attachment

Model: RE-2PLMA

(3 reviews)

Please Choose:

Brand

Redline Engineering

I Understand

I Understand That

Shipping upgrades offered in cart page

$2,499.50

In Stock in

Pensacola

Usually Ships Within

24-48 Hrs

Introducing the new Redline 2 Post Lift Lawn Mower Attachment! This attachment is adjustable both in its length and its arm mounts so you're able to utilize it with almost any 2 post lift. It features a 2,000 lb. capacity along with a yellow powder coat finish to help protect it from rust. Very handy for lifting lawn mowers, golf carts, ATVs, small tractors, and more. Sold as 4 pieces that combine into 2 attachments. The lift & mowers are NOT included. Order yours today!

KEY BENEFITS
• Adjustable length
• 2,000 lb. capacity
• Yellow powder coat finish
• Adjustable 2 post arm mounts
• Lift & mowers are NOT included
• Not recommended for turn column lifts
• Useful for lifting lawn mowers, ATVs, UTVs, golf carts, small tractors, and more

COMPATIBILITY
• Will not work on a true asymmetric "turned column" lift

• Max bolt inside length: 2"
• Minimum outside length: 99"
• Maximum outside length: 134"
• Minimum inside length: 86-3/8"
• Maximum inside length: 121-3/4"
• Platform metal thickness: 0.254"
• Arm mount metal thickness: 0.236"
• Overall dims: 15-3/8" W x 11-1/4" H
• Arm slot dims: 5-3/4" W x 15-1/2" L x 7-3/4" H

• Residential deliveries cost extra
• Local dock pickup saves residential fees
• FREE shipping to commercial location w/ forklift*
• Pensacola, FL pickups – read our policies HERE
• Units available in Pensacola, FL with $180 discount
• Ships 541 lbs. at 94" L x 36" W x 16" H (111220-05 Class 77) Ships as 4 pieces
• Free shipping applies to $200 maximum. If shipping exceeds this amount a surcharge may be needed

Reviews

5.0 / 5 (3 reviews)

Based on 3 Reviews Write review

Jul 25, 2025

Redline 2 Post Lift Lawn Mower Attachment
Jul 25, 2025

I have the Redline 2 Post Lift Lawn Mower Attachment and I have already used them it several times to lift my lawn tractors. It make the job much easier to change the oil, grease most of the fittings and sharpen the blades. The only unfavorable thing is when I have to use my lift for the cars I have to remove and store the adapter out of the way. But I knew this was going to happen. I love it.
Joe Arnold Jul 16, 2021

Old fashion customer service
Jul 16, 2021

The build is very strong and welding near perfect. I should mention that the whole transaction was over the internet and phone I live in NH over a thousand miles away. I would not hesitate to do business again with Redline. Joe A
Christopher Jul 10, 2018

Fast customer service
Jul 10, 2018

Quick response on questions I had before purchasing this product full review once I test it out.

Ask & Answer

Gary Jul 04, 2025

Q. Will the lawn mower attachment fit a Bendpak 10AP lift?
A. We're confident it will work. With that said, understand your wheelbase of the vehicle you're trying to lift will determine how well it will work. For example, if the wheelbase causes this product to sit on the transition joint of the triple stage arms, then you might have to implement some sort of homemade shims to insure our kit sits flush on your lift. At the end of the day, we are not a BendPak dealer and cannot make any promises, so it's up to the customer to carefully inspect our posted dimensions, and the customer's lift, to determine if it will work. We hope this helps. Thanks Gary.
Canamnewbee Sep 05, 2024

Q. I have a 2 post Tuxedo asymmetrical lift, looking to use this for can am Spyder, zero turn lawn mower, golf cart...will this work and is it on back order and what is the final shipped price?
A. Will it work? Likely, yes. Tuxedo makes many lifts, so we recommend contacting our sales staff with your model number so we can say for sure. Will it work with your golf cart, zero turn, and Spyder? Probably, but again, those things come in many different wheel bases, so it's impossible to say with such little information. Is it on backorder? No sir; these are in stock and ready to ship as of 9/5/24. What is the final shipped price? Again, we cannot say because we do not know what state you reside, nor what type of location the carrier is to deliver. Is there a forklift on site, or does the carrier need to unload it for you via lift gate? Again, all of these variables affect cost, so with such little inforation, we cannot quote a price. Please reach out to us; we'll have a good many questions before we can accurately quote you. Thanks for shopping with us!
Bob Apr 29, 2024

Q. Will this fit on a Triumph NT-15?
A. We cannot see it being any issue sir.
Jeff Apr 18, 2024

Q. Will it fit properly on my atlas PV10PX
A. This is difficult for us to say because as we look at pictures of the PV10PX online, the photos of the arms are not consistent. Some show the arms with long angular braces that would present a problem, while other pictures show something different. We recommend you shoot some photos of your actual lift and email them to us so we can try to make a more educated decision. Thanks for shopping with us Jeff!
Chris Feb 12, 2024

Q. Will this work with a Challenger VLE10 or a LE10 2 post lift?
A. Looking at the VLE10 on our website, I can see that one of the two arms triple telescopes. This creates several step-down areas of the arm, giving the adapter less space to sit flush on a flat surface. If that happens, you might find yourself using wood shims atop the triple arm in order to allow our adapter to sit completely flush and flat. Can it be done? Sure. Will you run into an issue and have to solve it? Possibly. I hope this helps. Thanks Chris.