I have a Princess auto motorcycle lift but I need to replace the bottle jack for it what do you Recommend

I'm sorry sir, but we cannot make a recommendation. We don't have Princess Auto stores here in the USA and we are not familiar with your lift. I can tell you this though, if you purchase one of our replacement pumps, be ready to go whatever distance is required to make it work, because we do not allow returns in situations where the customer purchases our replacement parts for our competitor's lift. We were forced to adopt that policy years ago to thwart returns of product customers had attempted hammering into place, to no avail. Thanks for shopping with us!

Has anyone used actually used this pump LD1K-HP [RP-1010-1KLDML-1] on a harbor freight lift if so did you have to modify anything

Yes sir. We've had dozens, possibly hundreds of customers, who have purchased this pump from Redline with the intention of installing it into a Harbor Freight table. Thus, we know it can be done. However, we at Redline haven't personally done this, and none of our previous customers have ever shared photos with us after having performed the swap. If you choose to go this route, please send us some pictures showing your install and we'll send you a free Redline shirt to say thanks. Lastly, if you choose to give it a shot, be ready to go the full distance to make it happen, as we do not allow returns of failed attempts to install this pump into a table for which it was not designed. Thanks for shopping with us!

looks like the black Air over hydraulic pump bottle jack for Harbor freight motorcycle table. Is it compatible upgrade or does anybody else different?

Harbor Freight has made multiple different table lifts over the years and we have not tested this pump on any of them. This is a Redline specific replacement pump, so please understand that if you intend to retrofit this into a non-Redline brand table, you're on your own. Under this circumstance, we do not allow returns of this item as it is common customers will try to install a pump like this into a non-Redline table and then return the pump in non-new condition. As a result, we do not allow returns of this pump under these circumstances. All of this is ultimately to say, 'If you're not prepared to go whatever distance is required, we do not recommend you attempt this retrofit.' I know plenty have done it and been successful, but not by way of easy bolt-into-place. Thanks for shopping with us sir!

Does this hydraulic pump sound like a jackhammer when raising a lift table or is it a smooth operation.

All air over hydraulic pumps will make a 'chuck chuck chuck' sound as it raises. The fluid will exit the pump more-so like how a machine gun expenses bullets. It's not a steady flow like a water hose. If you're looking for quiet and steady, you need an electric over hydraulic pump, of which no options exist for a pump like that found in the LD1K. I hope this helps. Thanks for shopping with us!

how many tons is the jack rated for? I know the lift is rated at 1000 lbs. but the jack pushes at the bottom of a lone lift point. It must be more then 1/2 ton.

We have asked the factory and hope to post that spec to our website tomorrow. It's surely several tons. Granted, I've found over the years that a lot of folks struggle with the idea that the bottle jack of a lift is rated to several tons, but the lift itself is only rated to something like 1,000 lbs. Many people don't seem to understand that just becuase the bottle jack may be rated to something like 5 tons does not mean the lift that the jack is installed will also handle 5 tons. It's all about the linkages. Thanks Jim.

Ships free

LD1K & 1000L Motorcycle Lift Table Replacement Hydraulic Pump

Move your mouse over image or click to enlarge

Ships free

Redline Transmission Jack Replacement Hydraulic Cylinder $379.50

Ships free

Redline Lift Table Pump Air Motor $159.95

Ships free

Redline PT1650/1500HD/PTL Heavy Duty Commercial Hydraulic Pump

$374.50

SaleShips free

Harbor Freight Motorcycle Lift Table Replacement Pump

Reg. $219.95 Sale price $199.95
9% off

Ships free

Kernel M1500 Lift table Flow Control Valve $179.99

Ships free

Titan 1500XLT Motorcycle Lift Table Hydraulic Pump $339.95

LD1K & 1000L Motorcycle Lift Table Replacement Hydraulic Pump

Model: LD1K-HP [RP-1010-1KLDML-1]

(9 reviews)

Please Choose:

Optional Accessories

Include Pneumatic Hose ( +$59.95 )

Bracket Kit ( +$99.95 )

Include Pneumatic Hose

Bracket Kit

Brand

Redline Engineering

$269.95

In Stock in

Pensacola

Usually Ships Within

24-48 Hrs

This is the OEM Redline factory replacement pump for our Redline LD1K lift table. It might also work as a replacement on some Titan 1000L lift tables along with other brands that utilize this style of pump. Older LD1K and 1000L models did not use this pump, so if your lift is older or is a non-Redline brand unit, be sure the photos of this pump match the style of pump your table uses. The 1000L pump is a factory replacement for the Titan 1000L and Redline LD1K; however, it can also be used to replace pump assemblies on other lesser quality made lifts. Older models of Titan 1000L and Redline LD1K tables did not use this pump, so inspect your table before ordering to be sure the photos of this pump match the style of pump your table uses. Order yours today!

KEY BENEFITS
• 90 day warranty
• Air hose is NOT included
• Powder coated black to never rust
• Operates both via foot or air power
• Listing is for PUMP ONLY

RETURNS
• When customers purchase this replacement pump for a product other than Titan LDML-1000L or Redline LD1K, returns ARE NOT allowed. NO EXCEPTIONS

• Ram length (min/max): 1-7/16" / 6-3/16"
• Overall length (min/max): 15" / 20-1/8"

• Ships 25 lbs. at 16" x 13" x 6"

Ships free

Kernel M1500 Replacement Hydraulic Cylinder $499.95

Ships free

Redline 1500HD / TR1500 / Titan 1500XLT Caster

$34.95

Ships free

Redline 1500ELE Electric Motorcycle Lift Power Unit $599.50

Ships free

Redline PP15HD Motorcycle Lift Table Pump Seal Kit $39.95

Ships free

Redline 1500HD Safety Release Cable Plastic Handle Replacement $29.95

Ships free

Titan SDML-1000D Lift Table OEM Replacement Air Cylinder $499.99

Reviews

5.0 / 5 (9 reviews)

Based on 9 Reviews Write review

John Jan 3, 2025

Great product, but some instructions would have been a plus
Jan 3, 2025

Recieved my jack. It was well packaged and in good condition. Installed it and at first it did not operate. I stopped and waited to call the tech line so as not to cause issues. I spoke to Justin who was very helpful an sent me a short video of how to bleed it. All ended up fine and works as it should.
David Oct 29, 2024

Awesome
Oct 29, 2024

If you have one of these motorcycle tables with a foot pump you can upgrade to this and it's a game changer it's awesome.
Jimmy Oct 20, 2024

Air pump for harbor, freight, lift
Oct 20, 2024

Everything went good very little alteration On manual pump rod

Ask & Answer

George Jan 08, 2025

Q. I have a Princess auto motorcycle lift but I need to replace the bottle jack for it what do you Recommend
A. I'm sorry sir, but we cannot make a recommendation. We don't have Princess Auto stores here in the USA and we are not familiar with your lift. I can tell you this though, if you purchase one of our replacement pumps, be ready to go whatever distance is required to make it work, because we do not allow returns in situations where the customer purchases our replacement parts for our competitor's lift. We were forced to adopt that policy years ago to thwart returns of product customers had attempted hammering into place, to no avail. Thanks for shopping with us!
Ironhead Jan 01, 2025

Q. Has anyone used actually used this pump LD1K-HP [RP-1010-1KLDML-1] on a harbor freight lift if so did you have to modify anything
A. Yes sir. We've had dozens, possibly hundreds of customers, who have purchased this pump from Redline with the intention of installing it into a Harbor Freight table. Thus, we know it can be done. However, we at Redline haven't personally done this, and none of our previous customers have ever shared photos with us after having performed the swap. If you choose to go this route, please send us some pictures showing your install and we'll send you a free Redline shirt to say thanks. Lastly, if you choose to give it a shot, be ready to go the full distance to make it happen, as we do not allow returns of failed attempts to install this pump into a table for which it was not designed. Thanks for shopping with us!
dwHempz’ Aug 14, 2024

Q. looks like the black Air over hydraulic pump bottle jack for Harbor freight motorcycle table. Is it compatible upgrade or does anybody else different?
A. Harbor Freight has made multiple different table lifts over the years and we have not tested this pump on any of them. This is a Redline specific replacement pump, so please understand that if you intend to retrofit this into a non-Redline brand table, you're on your own. Under this circumstance, we do not allow returns of this item as it is common customers will try to install a pump like this into a non-Redline table and then return the pump in non-new condition. As a result, we do not allow returns of this pump under these circumstances. All of this is ultimately to say, "If you're not prepared to go whatever distance is required, we do not recommend you attempt this retrofit." I know plenty have done it and been successful, but not by way of easy bolt-into-place. Thanks for shopping with us sir!
Only honest answers Jan 19, 2024

Q. Does this hydraulic pump sound like a jackhammer when raising a lift table or is it a smooth operation.
A. All air over hydraulic pumps will make a "chuck chuck chuck" sound as it raises. The fluid will exit the pump more-so like how a machine gun expenses bullets. It's not a steady flow like a water hose. If you're looking for quiet and steady, you need an electric over hydraulic pump, of which no options exist for a pump like that found in the LD1K. I hope this helps. Thanks for shopping with us!
jim May 13, 2023

Q. how many tons is the jack rated for? I know the lift is rated at 1000 lbs. but the jack pushes at the bottom of a lone lift point. It must be more then 1/2 ton.
A. We have asked the factory and hope to post that spec to our website tomorrow. It's surely several tons. Granted, I've found over the years that a lot of folks struggle with the idea that the bottle jack of a lift is rated to several tons, but the lift itself is only rated to something like 1,000 lbs. Many people don't seem to understand that just becuase the bottle jack may be rated to something like 5 tons does not mean the lift that the jack is installed will also handle 5 tons. It's all about the linkages. Thanks Jim.