How do identify your lift? I’ve bought a used one that I thought was another brand. But it has an air operated jack that is similar LD1K.

Best thing to do is to email photos of it to us. All Redline LD1K lifts are black/red and have a Redline decal on them. We'll inspect it and let you know if it's ours or not. Thanks!

Hello - Is this pump rebuildable, i.e. are the seals and pars commercially available? Thanks!

Yes sir. See THIS KIT. Thanks for your question!

I have a HF MC Lift Table with the hydraulic jack similar to RL's Replacement Pump. Can you provide me with the dimensions of the Pivot Bar Diameters. The width of the RP's Pivot base. And the Height of the RP from the center line of the pivot to the top of the jack ram rod in the down position? Thank you for your help.

Yes sir. It would appear the I.D. of the mounting hole is 1 inch. The width of the mounting base is 11-15/16 inches, and the center of pivot to ram rod in the lowered position is 8.25 inches. Please make sure you're prepared to do whatever is necessary to make it fit if you buy it, because these are not returnable for any reason. We quit allowing returns on them years ago because too many folks would buy the wrong jack for their lift, try to hammer it in place, and then return it all beat-up. Thanks Lewis!

Dose this include the base plate if not how do i order the base plate for it

This current model pump has the mounting base built into the pump just as shown in the photos. I hope this helps. Thanks Sean!

What's the lifting capacity,it doesn't say,for the hydraulic replacement pump. Model #LD1K-HP (RP-1010-1KLDML-1)

It's actually not possible for us to answer that question sir. The lift capacity is determined by the steel frame of the motorcycle lift, not the tonnage of the bottle jack that operates it. This pump, if installed into our LD1K motorcycle lift, operates the table with 1,000 lbs of capacity, despite that the bottle jack itself produces several tons of force. I hope this helps. Thanks Mick!

Ships free

LD1K & 1000L Motorcycle Lift Table Replacement Hydraulic Pump

Move your mouse over image or click to enlarge

Ships free

Redline Motorcycle Lift Table Hydraulic Pump

$249.95

Ships free

Redline Motorcycle Lift Table Air Hydraulic Electric Cylinder $229.95

Ships free

Harbor Freight Motorcycle Lift Table Replacement Pump

$199.95

Ships free

Kernel M1500 Lift table Flow Control Valve $179.99

Ships free

Titan 1500XLT Motorcycle Lift Table Hydraulic Pump $339.95

Ships free

K&L Supply MC550 Replacement Bottle Jack $149.95

LD1K & 1000L Motorcycle Lift Table Replacement Hydraulic Pump

Model: LD1K-HP [RP-1010-1KLDML-1]

(5 reviews)

Optional Accessories

Include Pneumatic Hose ( +$49.95 )

Include Pneumatic Hose

Brand

Redline Engineering

Shipping upgrades offered in cart page

$249.95

The 1000L pump is a factory replacement for the Titan 1000L and Redline LD1K; however, it can also be used to replace pump assemblies on other lesser quality made lifts. Older models of Titan 1000L and Redline LD1K tables did not use this pump, so inspect your table before ordering to be sure the photos of this pump match the style of pump your table uses. Order yours today!

KEY BENEFITS
• 90 day warranty
• Air hose is NOT included
• Powder coated black to never rust
• Operates both via foot or air power
• Listing is for PUMP ONLY

RETURNS
• When customers purchase this replacement pump for a product other than Titan LDML-1000L or Redline LD1K, returns ARE NOT allowed. NO EXCEPTIONS

• Ram length (min/max): 1-7/16" / 6-3/16"
• Overall length (min/max): 15" / 20-1/8"

• Ships 25 lbs. at 16" x 13" x 6"

Ships free

Redline Motorcycle Lift Table Hydraulic Pump

$249.95

Ships free

Redline Motorcycle Lift Table Air Hydraulic Electric Cylinder $229.95

Ships free

Harbor Freight Motorcycle Lift Table Replacement Pump

$199.95

Ships free

Kernel M1500 Lift table Flow Control Valve $179.99

Ships free

Titan 1500XLT Motorcycle Lift Table Hydraulic Pump $339.95

Ships free

K&L Supply MC550 Replacement Bottle Jack $149.95

Reviews

5.0 / 5 (5 reviews)

Based on 5 Reviews Write review

Vincent Dorsey Dec 6, 2023

Perfect fit
Dec 6, 2023

This was used as a replacement to the original pump to a Harbor Frieght lift. I got lucky and found I have a direct switch. No issues in changing it out. Just should have bought the hoses along with it.
Dave Tucker Jan 27, 2023

Converted HF hydraulic lift to air over hydraulic
Jan 27, 2023

Thanks Redline for providing me with a direct replacement for my HF motorcycle lift! The only modification I had to make was to the manual pump linkage alignment, which was very simple using a spacer and bolt to offset the linkage. NO WELDING necessary! There was no need to buy the 1" round stock as I used the existing 1" pivot rod stock from the old pump. The conversion took maybe an hour.
Chad Confer Jan 15, 2023

Upgraded central pneumatic HF lift
Jan 15, 2023

Fit perfect! A little adjustment on the manual pump lever was all I had to modify. You will need a 1in dia x 13in long pin to install. Cut in half for the pins. GTG! FROM REDLINE STAFF: We suspect this customer is talking about installing this pump on a different table, such as a Harbor Freight table, but we cannot be sure as he does not specify. Given that this pump is a direct bolt-in replacement on a Redline LD1K lift with no modification needed, we're certain this customer has not installed this pump into the Redline LD1K.

Ask & Answer

Sasquatch Jan 19, 2023

Q. How do identify your lift? I’ve bought a used one that I thought was another brand. But it has an air operated jack that is similar LD1K.
A. Best thing to do is to email photos of it to us. All Redline LD1K lifts are black/red and have a Redline decal on them. We'll inspect it and let you know if it's ours or not. Thanks!
Pete2 Aug 29, 2022

Q. Hello - Is this pump rebuildable, i.e. are the seals and pars commercially available? Thanks!
A. Yes sir. See THIS KIT. Thanks for your question!
Lewis D Jul 05, 2022

Q. I have a HF MC Lift Table with the hydraulic jack similar to RL's Replacement Pump. Can you provide me with the dimensions of the Pivot Bar Diameters. The width of the RP's Pivot base. And the Height of the RP from the center line of the pivot to the top of the jack ram rod in the down position? Thank you for your help.
A. Yes sir. It would appear the I.D. of the mounting hole is 1 inch. The width of the mounting base is 11-15/16 inches, and the center of pivot to ram rod in the lowered position is 8.25 inches. Please make sure you're prepared to do whatever is necessary to make it fit if you buy it, because these are not returnable for any reason. We quit allowing returns on them years ago because too many folks would buy the wrong jack for their lift, try to hammer it in place, and then return it all beat-up. Thanks Lewis!
Sean Jun 01, 2022

Q. Dose this include the base plate if not how do i order the base plate for it
A. This current model pump has the mounting base built into the pump just as shown in the photos. I hope this helps. Thanks Sean!
Mick May 20, 2022

Q. What's the lifting capacity,it doesn't say,for the hydraulic replacement pump. Model #LD1K-HP (RP-1010-1KLDML-1)
A. It's actually not possible for us to answer that question sir. The lift capacity is determined by the steel frame of the motorcycle lift, not the tonnage of the bottle jack that operates it. This pump, if installed into our LD1K motorcycle lift, operates the table with 1,000 lbs of capacity, despite that the bottle jack itself produces several tons of force. I hope this helps. Thanks Mick!