Will a straight 6 “Nissan” 280z engine mount t this?

We believe it will, but cannot promise this as we have no direct experience with that particular motor. Thanks for shopping with us!

Is there anything specific needed for an LS application other than LS engine mounts? Thank you,

Not that we are aware sir. As long as you have engine mounts and bellhousing bolts, you should be good to go. Thanks for shopping with us!

Is there a way to hook up a sprint car engine the pumps mount to the back of the cam so a normal fly wheel won't work

I'm sorry Greg but we have no experience mounting sprint car engines to this stand sir.

Is there a manual on how you put it together and/or FOLD it up ? There are no pictures of it in the folded position. Thank you.

All you have to do to break it down for storage is remove the tower for the gauges and remove the bell housing tower that mounts to the back of the engine. In the additional photos, pictures #14 thru #16 show the stand in it's folded state. Thanks for your question.

Will Flathead V-8's fit?

Yes sir, but some modifications will be needed for the engine mounts. Thanks for shopping withg us Sam!

Redline RE-ENGS Automotive Engine Build/Run/Test Stand

Move your mouse over image or click to enlarge

Ships free

Pit Pal Engine Lift Hoist Sling $249.99

K&L Supply Dreadnought 6 & 8 Cyl. Outboard Motor Stand $1,669.50

Ships free

Merrick USA Made Rear End Axle Adapter $159.95

Ships free

K&L Supply Carb Service Stand $189.99

Ships free

Allstar Performance Sprint Engine Cradle $179.95

Ships free

Merrick USA Made Hood Deck Picker $219.95

Redline RE-ENGS Automotive Engine Build/Run/Test Stand

Model: RE-ENGS

(2 reviews)

Please Choose:

Optional Accessories

Radiator ( +$289.50 )

Fuel Cell ( +$139.50 )

Gauges & Control Panel ( +$259.50 )

Radiator

Fuel Cell

Gauges & Control Panel

Brand

Redline Engineering

Shipping upgrades offered in cart page

$899.50

Notify me when this product is back in stock.

In Stock in

Pensacola

Usually Ships Within

24-48 Hrs

Introducing the New Redline RE-ENGS Automotive Engine Run & Test Stand! This handy mobile stand allows you to easily run your engine without having to install it into a vehicle. It includes 4 radiator mounts, a universal mount to bolt the bell-housing of nearly any engine to the stand, a rotating head attachment, and 2 mounting posts that will secure to the traditional motor mounts on the engine block. Several optional upgrades can further enhance the stand such as the aluminum fuel cell and full dash consisting of all vital gauges. Order yours today!

KEY BENEFITS

• Covered by Redline's 1-Year parts warranty

• Folds up for easy storage

• Optional fuel cell includes fuel sending unit, but no fuel pump

• Default mounting head offers 11 height locations with a range of 10"

• Base stand includes 4 radiator mounts, bell-housing attachment, aluminum dash, and 2 engine mount posts

• Optional full dash includes an accelerator cable as well as gauges for oil pressure, water temperature & RPM (components may differ slightly from picture)

BASE ENGINE STAND

• 1200 lb. capacity

• Metal thickness: 0.147"

• Floor clearance: 8-1/2"

• Overall dims: 54" L x 35" W x 43" H

• Caster diameter: 4-1/2" (2x braking)

MOUNTING POSTS/STAND

• Adjustable range: 10"

• Overall dims (Posts): 28" x 6" x 18-3/4"

• Overall dims (Stand): 15-3/4" x 2-1/4" x 29-5/8"

ENGINE BUILD ROTATING HEAD

• 4x arm dims: 6-1/2" x 2-1/2"

• Overall dims: 18-3/4" x 8-1/2" x 27-3/8"

OPTIONAL RADIATOR

• Aluminum construction

• Customer supplied electric fan required

• Overall dims vary based on supplier availability

• Inlet/outlet hose mount location varies based on supplier availability

OPTIONAL FULL DASH

• Overall dims: 22-1/2" x 1" x 6-1/4"

OPTIONAL FUEL CELL

• Integrated sump

• Dual 10AN outlets

• Dual 10AN vent outlets

• 0-90 Ohm fuel sender

• Aluminum construction

• Quick release fuel cap

• Overall dims: 8-1/2" x 8-1/4" x 10"

• Cannot store methanol or ethanol

• Tank measures 8" (L) x 8.25" (W) x 10" (H)

• Mounting tabs measure 6-1/2" (L) x 9-3/4" (W) center to center

Ships free

Pit Pal Engine Lift Hoist Sling $249.99

Ships free

Merrick USA Made Fold & Tilt Engine Stand $1,289.50

Ships free

Pit Pal Pro Start Engine Cradle $569.99

Ships free

Norco 1,500 lb. Engine Load Leveler $289.50

Handy Rotating Lawn Mower Lift Stand $1,299.50

Ships free

MC25 K&L Supply Motorcycle Engine Stand $329.95

Reviews

5.0 / 5 (2 reviews)

Based on 2 Reviews Write review

Stephen Glover Nov 12, 2024

Great for LS engine
Nov 12, 2024

Very well made sturdy stand. Placed our LS on the stand and found it to be very conducive for adding battery stand, fuel cell etc. Highly recommended.
Stephen Glover Jun 3, 2024

Very expandable
Jun 3, 2024

Received everything in a timely manner. Easy to add anything you need to adapt to the engine you need SBC, LS, ETC.

Ask & Answer

Jcw Nov 16, 2024

Q. Will a straight 6 “Nissan” 280z engine mount t this?
A. We believe it will, but cannot promise this as we have no direct experience with that particular motor. Thanks for shopping with us!
PETE Nov 08, 2024

Q. Is there anything specific needed for an LS application other than LS engine mounts? Thank you,
A. Not that we are aware sir. As long as you have engine mounts and bellhousing bolts, you should be good to go. Thanks for shopping with us!
Greg Apr 03, 2024

Q. Is there a way to hook up a sprint car engine the pumps mount to the back of the cam so a normal fly wheel won't work
A. I'm sorry Greg but we have no experience mounting sprint car engines to this stand sir.
L Dec 24, 2023

Q. Is there a manual on how you put it together and/or FOLD it up ? There are no pictures of it in the folded position. Thank you.
A. All you have to do to break it down for storage is remove the tower for the gauges and remove the bell housing tower that mounts to the back of the engine. In the additional photos, pictures #14 thru #16 show the stand in it's folded state. Thanks for your question.
Sam Jan 17, 2023

Q. Will Flathead V-8's fit?
A. Yes sir, but some modifications will be needed for the engine mounts. Thanks for shopping withg us Sam!