Shopping cart 0

Redline RE-ENGS Automotive Engine Build/Run/Test Stand

Model: RE-ENGS

(6 reviews)

Please Choose:

Optional Accessories

A generic image
Radiator

A generic image
Fuel Cell

A generic image
Gauges & Control Panel
Brand

Shipping upgrades offered in cart page

$999.50
box icon

In Stock in

Pensacola
delivery icon

Usually Ships Within

24-48 Hrs

Description

Introducing the New Redline RE-ENGS Automotive Engine Run & Test Stand! This handy mobile stand allows you to easily run your engine without having to install it into a vehicle. It includes 4 radiator mounts, a universal mount to bolt the bell-housing of nearly any engine to the stand, a rotating head attachment, and 2 mounting posts that will secure to the traditional motor mounts on the engine block. Several optional upgrades can further enhance the stand such as the aluminum fuel cell and full dash consisting of all vital gauges. Order yours today!
 

KEY BENEFITS

• Covered by Redline's 1-Year parts warranty
• Folds up for easy storage
• Optional fuel cell includes fuel sending unit, but no fuel pump
• Default mounting head offers 11 height locations with a range of 10"
• Base stand includes 4 radiator mounts, bell-housing attachment, aluminum dash, and 2 engine mount posts
• Optional full dash includes an accelerator cable as well as gauges for oil pressure, water temperature & RPM (components/gauges may differ slightly from picture)

Show more

Specs

BASE ENGINE STAND
• 1200 lb. capacity
• Metal thickness: 0.147"
• Floor clearance: 8-1/2"
• 280 lb. capacity per caster
• Overall dims: 54" L x 35" W x 43" H
• Caster diameter: 4-1/2" (2x braking)

MOUNTING POSTS/STAND
• Adjustable range: 10"
• Overall dims (Posts): 28" x 6" x 18-3/4"
• Overall dims (Stand): 15-3/4" x 2-1/4" x 29-5/8"

ENGINE BUILD ROTATING HEAD
• 4x arm dims: 6-1/2" x 2-1/2"
• Overall dims: 18-3/4" x 8-1/2" x 27-3/8"

OPTIONAL RADIATOR
• Aluminum construction
• Customer supplied electric fan required
• Overall dims vary based on supplier availability
• Inlet/outlet hose mount location varies based on supplier availability

OPTIONAL FULL DASH
• Overall dims: 22-1/2" x 1" x 6-1/4"

OPTIONAL FUEL CELL
• Integrated sump

• 2.5 gallon capacity
• Dual 10AN outlets
• Dual 10AN vent outlets
• 0-90 Ohm fuel sender
• Aluminum construction
• Quick release fuel cap
• Overall dims: 8-1/2" x 8-1/4" x 10"
• Cannot store methanol or ethanol
• Tank measures 8" (L) x 8.25" (W) x 10" (H)
• Mounting tabs measure 6-1/2" (L) x 9-3/4" (W) center to center

Downloads

• Download the manual pdf HERE
• Download the wiring diagram HERE

Shipping

• Residential deliveries cost extra
• Local dock pickup saves residential fees
• Ships 264 lbs. at 56" x 36" x 16" class 85
• FREE shipping to commercial location w/ forklift
• Free shipping applies to $250 maximum. If shipping exceeds this amount a surcharge may be needed

Videos

Reviews

4.8 / 5 (6 reviews)
Based on 6 Reviews Write review
  • Sep 25, 2026

    Nice stand.

    Sep 25, 2026
    One drawback is the hard rubber wheels. BBC with 8-71 blower, full radiator, fuel cell, battery etc those wheels get a flat spot on the bottom. That much weight its hard to push it around. Needs steel wheels.
  • Sep 4, 2026

    Nice stand but...

    Sep 4, 2026
    Need a low profile cherry picker where the picker legs will go under the run stand. Otherwise, you'll need an overhead hoist. No way to mount the engine unless you remove the wheels from your cherry picker or add a 3" shim between the wheels and frame of the run stand. Well built thought out run stand.
  • Jul 29, 2026

    must have for muscle car builds

    Jul 29, 2026
    This thing makes engine break in ridiculously easy. Now I can get everything set up so I can monitor and run the engine without having to install the motor. No more finding leaks after an install. The peace of mind when I put the engine into a vehicle after seeing everything work properly is priceless. Shipped fast as hell too.

Ask & Answer

  • Sant Nov 18, 2026
    Q. Does it work for the 6.0 powerstroke?
    A. We haven't tested it with a diesel, or seen any customers try it. Given I cannot say definitively, I'm going to err on the site of caution and say that engine is probably too heavy for it. My apologies.
  • Buzzard Apr 10, 2026
    Q. Will this stand accommodate a FE 390 with the bell housing attached?
    A. We believe it will, but we have not seen it done that will allow us to confirm with certainty.
  • Carl Apr 09, 2026
    Q. I was on your page somewhere where it asked what mounts I needed, and one of the options was for ‘short block ford’. Is this one for a sbf 351w?
    A. We don't provide the engine mounts sir. Those are motor-specific and provided by the customer. Thanks for shopping with us!
  • 71 Mach Mar 30, 2026
    Q. Will your stand accommodate a 351 Ford Cleveland engine? Just worried about the side engine mounts possibly not aligning?
    A. Looking at pictures online, we see no reason it cannot be done, so long as you're capable and willing to fabricate some custom brackets if needed. Thanks for shopping with us!
  • J Mar 23, 2026
    Q. How would you mount a 74 Ford Small Block Windsor 302 to this stand? The way the engine mounts are for a ford V8 it doesn't seem to match up.
    A. My apologies but we've never seen a customer mount that particular engine to our stand and share pictures showing how he did it. If you choose to move forward with your purchase, please shoot some good quality pix of your motor on our stand and we'll give you a $100 store credit toward another purchase. We'd love to post those pictures for others to see. Thanks for shopping with us!

ASK A “PUBLICLY POSTED” QUESTION

You need to be logged to vote.



  1. Home
  2. Shop Equipment
  3. General Shop Equipment
  4. Engine Stands
  5. Redline RE-ENGS Automotive Engine Build/Run/Test Stand