I have a HF MC Lift Table with the hydraulic jack similar to RL's Replacement Pump. Can you provide me with the dimensions of the Pivot Bar Diameters. The width of the RP's Pivot base. And the Height of the RP from the center line of the pivot to the top of the jack ram rod in the down position? Thank you for your help.

Yes sir. It would appear the I.D. of the mounting hole is 1 inch. The width of the mounting base is 11-15/16 inches, and the center of pivot to ram rod in the lowered position is 8.25 inches. Please make sure you're prepared to do whatever is necessary to make it fit if you buy it, because these are not returnable for any reason. We quit allowing returns on them years ago because too many folks would buy the wrong jack for their lift, try to hammer it in place, and then return it all beat-up. Thanks Lewis!

Dose this include the base plate if not how do i order the base plate for it

This current model pump has the mounting base built into the pump just as shown in the photos. I hope this helps. Thanks Sean!

What's the lifting capacity,it doesn't say,for the hydraulic replacement pump. Model #LD1K-HP (RP-1010-1KLDML-1)

It's actually not possible for us to answer that question sir. The lift capacity is determined by the steel frame of the motorcycle lift, not the tonnage of the bottle jack that operates it. This pump, if installed into our LD1K motorcycle lift, operates the table with 1,000 lbs of capacity, despite that the bottle jack itself produces several tons of force. I hope this helps. Thanks Mick!

How do I order the base for the LD1K & 1000L Motorcycle Lift Table Replacement Hydraulic Pump.

Our new style LD1K pump, which is what's offered here, includes the mounting base built into the assembly sir. Thanks Shane!

Does this come with the pump air pump motor and base plate?

It comes with the air motor, but not the mounting base plate. Thanks Mike!

Ships free

LD1K & 1000L Motorcycle Lift Table Replacement Hydraulic Pump

Move your mouse over image or click to enlarge

Ships free

Kernel M-1500C-HR OEM Factory Replacement Hydraulic Oil Hose $149.95

Ships free

Kernel M1500 Cylinder Seal Kit $119.95

Ships free

Redline 1500ELE Electric Lift Table Electromagnetic Valve $139.95

Ships free

K&L Supply MC550 Replacement Bottle Jack $149.95

Ships free

Redline 1500ELE Electric Lift Table Replacement Lift Contactor $119.95

Ships free

Norco Oil Flow Control Valve $139.95

LD1K & 1000L Motorcycle Lift Table Replacement Hydraulic Pump

Model: LD1K-HP [RP-1010-1KLDML-1]

(9 reviews)

Please Choose:

Optional Accessories

Include Pneumatic Hose ( +$49.95 )

Bracket Kit ( +$99.95 )

Include Pneumatic Hose

Bracket Kit

Brand

Redline Engineering

$269.95

In Stock in

Pensacola

Usually Ships Within

24-48 Hrs

This is the OEM Redline factory replacement pump for our Redline LD1K lift table. It might also work as a replacement on some Titan 1000L lift tables along with other brands that utilize this style of pump. Older LD1K and 1000L models did not use this pump, so if your lift is older or is a non-Redline brand unit, be sure the photos of this pump match the style of pump your table uses. The 1000L pump is a factory replacement for the Titan 1000L and Redline LD1K; however, it can also be used to replace pump assemblies on other lesser quality made lifts. Older models of Titan 1000L and Redline LD1K tables did not use this pump, so inspect your table before ordering to be sure the photos of this pump match the style of pump your table uses. Order yours today!

KEY BENEFITS
• 90 day warranty
• Air hose is NOT included
• Powder coated black to never rust
• Operates both via foot or air power
• Listing is for PUMP ONLY

RETURNS
• When customers purchase this replacement pump for a product other than Titan LDML-1000L or Redline LD1K, returns ARE NOT allowed. NO EXCEPTIONS

• Ram length (min/max): 1-7/16" / 6-3/16"
• Overall length (min/max): 15" / 20-1/8"

• Ships 25 lbs. at 16" x 13" x 6"

Ships free

K&L Supply MC550 Replacement Bottle Jack $149.95

Ships free

Kernel M-1500C-HR OEM Factory Replacement Hydraulic Oil Hose $149.95

Ships free

Redline Transmission Jack Replacement Hydraulic Cylinder $379.50

Ships free

Redline PT1650/1500HD/PTL Heavy Duty Commercial Hydraulic Pump

$374.50

Ships free

Kernel M1500 Lift table Flow Control Valve $179.99

Ships free

Redline Lift Table Pump Air Motor $159.95

Reviews

5.0 / 5 (9 reviews)

Based on 9 Reviews Write review

John Jan 3, 2025

Great product, but some instructions would have been a plus
Jan 3, 2025

Recieved my jack. It was well packaged and in good condition. Installed it and at first it did not operate. I stopped and waited to call the tech line so as not to cause issues. I spoke to Justin who was very helpful an sent me a short video of how to bleed it. All ended up fine and works as it should.
David Oct 29, 2024

Awesome
Oct 29, 2024

If you have one of these motorcycle tables with a foot pump you can upgrade to this and it's a game changer it's awesome.
Jimmy Oct 20, 2024

Air pump for harbor, freight, lift
Oct 20, 2024

Everything went good very little alteration On manual pump rod

Ask & Answer

Lewis D Jul 05, 2022

Q. I have a HF MC Lift Table with the hydraulic jack similar to RL's Replacement Pump. Can you provide me with the dimensions of the Pivot Bar Diameters. The width of the RP's Pivot base. And the Height of the RP from the center line of the pivot to the top of the jack ram rod in the down position? Thank you for your help.
A. Yes sir. It would appear the I.D. of the mounting hole is 1 inch. The width of the mounting base is 11-15/16 inches, and the center of pivot to ram rod in the lowered position is 8.25 inches. Please make sure you're prepared to do whatever is necessary to make it fit if you buy it, because these are not returnable for any reason. We quit allowing returns on them years ago because too many folks would buy the wrong jack for their lift, try to hammer it in place, and then return it all beat-up. Thanks Lewis!
Sean Jun 01, 2022

Q. Dose this include the base plate if not how do i order the base plate for it
A. This current model pump has the mounting base built into the pump just as shown in the photos. I hope this helps. Thanks Sean!
Mick May 20, 2022

Q. What's the lifting capacity,it doesn't say,for the hydraulic replacement pump. Model #LD1K-HP (RP-1010-1KLDML-1)
A. It's actually not possible for us to answer that question sir. The lift capacity is determined by the steel frame of the motorcycle lift, not the tonnage of the bottle jack that operates it. This pump, if installed into our LD1K motorcycle lift, operates the table with 1,000 lbs of capacity, despite that the bottle jack itself produces several tons of force. I hope this helps. Thanks Mick!
Shane Apr 20, 2022

Q. How do I order the base for the LD1K & 1000L Motorcycle Lift Table Replacement Hydraulic Pump.
A. Our new style LD1K pump, which is what's offered here, includes the mounting base built into the assembly sir. Thanks Shane!
Mike Apr 16, 2022

Q. Does this come with the pump air pump motor and base plate?
A. It comes with the air motor, but not the mounting base plate. Thanks Mike!