will these adaptors work for my 2008 Goldwing? If not, can you recommend some that do work .

My apologie sir, but we're not sure. You'll need to inspect underneath your Wing to be sure that there is A: enough ground clearance for the lift arms and adapters. B: sufficient lift points for these adapters to touch the frame. I wish we could be of more help but we just don't have a Wing handy to inspect. Thanks for your question!

Will these work on a Bendpak XPR -18C-192 with 4' extending arms?

These will fit arms as wide as 4-1/8' sir. Thanks Jim.

Will the Redline RE-2PA 2 Post Lift Motorcycle ATV Adapters work for lifting a Harley Tri-glide trike?

I cannot imagine why not. All you need is 4 points under the frame where the lift can access and pick up. Just be sure that from wherever you intend to lift does not create center-of-gravity issues. Meaning, if you attempt to lift from under the motor and it just causes the trike to tip backwards due to all the extra weight of the trike in the rear. We at Redline haven't personally done it, but it sounds plausible.

Will you ship to Australia?

My apologies sir, but for a host of reasons we do not offer international shipping. If you'd like to pay via wire transfer and supply your own shipping, we'll be glad to accommodate you, but otherwise we cannot. Thanks Steve.

Ships free

Redline RE-2PA 2 Post Lift Motorcycle ATV Adapters

Move your mouse over image or click to enlarge

Ships free

Titan Replacement Power Unit Pump Reservoir Tank $149.95

Ships free

9K Hydraulic Cylinder Hardware Kit $149.99

Ships free

Titan 9K 2 Post Carriage Slider Block Set of 8 $149.95

Ships free

10 Pc Two Post Auto Lift Leveling Shim Kit $149.99

Ships free

Kernel Auto 2 Post Lift Door Guard Protector Pads $149.99

Ships free

Kernel iDeal Launch 9K-12K 2 Post Carriage Slider Block Set of 8 $149.95

Redline RE-2PA 2 Post Lift Motorcycle ATV Adapters

Model: RE-2PA

Please Choose:

Optional Accessories

Include RMC1 Redline Wheel Chock ( +$119.95 )

Titan Bulldog Moto-Cradle ( +$419.50 )

Include RMC1 Redline Wheel Chock

Titan Bulldog Moto-Cradle

Brand

Redline Engineering

I Understand

$199.50

In Stock in

Pensacola

Usually Ships Within

24-48 Hrs

These adapters are designed for converting your 2 post auto lift into a motorcycle lift. Just slide the adapters over the arms and clamp them in place. The telescoping, rubberized lifting feet pick up from your bike's frame rails and you're good to go to perform your own motorcycle maintenance. Customer should inspect underneath motorcycle to verify exposed frame rails with which these lifting feet will be able to contact. Order these patent pending adapters today!

KEY BENEFITS
• Sold as a set of 4
• Powder coated finish
• 3/8" thick steel frame
• Laser cut frame is precise
• Rubberized feet telescope

NOTE
• Adapters do not work well with Launch 11K TLT211-AS lift
• Redline recommends using customer supplied ratchet straps to secure your motorcycle/atv to your lift's arms to ensure your safety while using this product

PATENT
• Patent pending

• Lowest setting: 1 3/8"
• Foot telescopes 1" in & out
• Fits arms as wide as 4-1/8"
• Fits arms as narrow as 2-3/4"

• Ships 12 lbs. at 8" W x 12" L x 5" H

Ships free

9K Hydraulic Cylinder Hardware Kit $149.99

Ships free

Titan Kernel 2 Post Lift Replacement OEM Cable $159.95

Ships free

Titan Replacement Power Unit Pump Reservoir Tank $149.95

Ships free

Kernel Auto 2 Post Lift Door Guard Protector Pads $149.99

Ships free

10 Pc Two Post Auto Lift Leveling Shim Kit $149.99

Ships free

Kernel iDeal Launch 9K-12K 2 Post Carriage Slider Block Set of 8 $149.95

Reviews

Be the first: write a review.

Ask & Answer

Ron Apr 20, 2024

Q. Will these adapters fit on my TP9KACX Tuxedo 9k TWO POST lift.
A. Definitely. Thanks Ron!
baldeegel Feb 26, 2023

Q. will these adaptors work for my 2008 Goldwing? If not, can you recommend some that do work .
A. My apologie sir, but we're not sure. You'll need to inspect underneath your Wing to be sure that there is A: enough ground clearance for the lift arms and adapters. B: sufficient lift points for these adapters to touch the frame. I wish we could be of more help but we just don't have a Wing handy to inspect. Thanks for your question!
Jim Dec 05, 2022

Q. Will these work on a Bendpak XPR -18C-192 with 4" extending arms?
A. These will fit arms as wide as 4-1/8" sir. Thanks Jim.
Kountry Oct 06, 2022

Q. Will the Redline RE-2PA 2 Post Lift Motorcycle ATV Adapters work for lifting a Harley Tri-glide trike?
A. I cannot imagine why not. All you need is 4 points under the frame where the lift can access and pick up. Just be sure that from wherever you intend to lift does not create center-of-gravity issues. Meaning, if you attempt to lift from under the motor and it just causes the trike to tip backwards due to all the extra weight of the trike in the rear. We at Redline haven't personally done it, but it sounds plausible.
Steve Apr 29, 2022

Q. Will you ship to Australia?
A. My apologies sir, but for a host of reasons we do not offer international shipping. If you'd like to pay via wire transfer and supply your own shipping, we'll be glad to accommodate you, but otherwise we cannot. Thanks Steve.