Best Motorcycle Dolly for Your Garage or Shop

Last Updated on October 30, 2026

If you have ever tried to push a 700 lb bike backward out of a tight garage corner, you know how hard it is on your back and your nerves. One slip and the bike is on its side. A motorcycle dolly fixes that. Your bike sits on a low steel base with swivel casters, so you can spin it in place and tuck it into spots you could never back it into on its own.

The best motorcycle dolly for you comes down to two questions. Does your bike have a center stand? And what will you do with it once it is on the dolly: park and store it, or work on it?

Here is the short answer. If your bike has a center stand, use a center stand dolly. If you ride a Harley or a heavy cruiser with only a kickstand, a drive-on dolly is the easiest fit. For a long build or engine work, a cradle dolly paired with a jack holds the bike at a good working height while still letting you roll it around. And for dirt bikes or ATVs, a simple flat platform dolly does the job.

Below, we break down each type and walk through every dolly we carry, so you can pick the right one the first time. You can also browse the full lineup in our motorcycle dollies collection.

 

Quick Picks: Best Motorcycle Dolly for Each Job

Short on time? Here is the right dolly for each kind of rider and shop:

 

What a Motorcycle Dolly Does

A motorcycle dolly is a low platform or frame on swivel casters. Once your bike is on it, you can move it in any direction with one hand on the frame. Skip the three-point turn and stop fighting the bike’s weight.

Riders and shops use a motorcycle dolly mover for four main jobs:

  • Parking in tight spots. Roll the bike sideways into a corner or against a wall.
  • Fitting more in your garage. Park two or more bikes close together and spin each one out when you need it.
  • Moving a bike around the shop. Shift a project bike out of the way during a long build without starting it.
  • Keeping it steady for cleaning and service. It keeps the bike upright while you wash it or lube the chain.

A motorcycle dolly is a different tool from a tow dolly or a wheel chock. A tow dolly hauls a bike behind a car or truck on the road. A wheel chock holds the front wheel still so the bike cannot roll. A dolly is made for the garage floor, and its whole job is to let the bike move easily. To keep a bike locked in place, read our guide to motorcycle wheel chocks.

 

Types of Motorcycle Dollies

Before you compare models, it helps to know the four main styles. Each one holds the bike differently, which determines which bikes it can carry.

1. Center Stand Dollies

A center stand dolly is a small steel plate on casters. You park the bike on its own center stand on top of the plate. It is the smallest and most affordable type, and it takes up almost no extra floor space.

This style works best for touring and sport-touring bikes with a center stand, like many BMW and Honda models. The one thing to check is the width of your center stand feet. They need to sit fully on the plate.

2. Drive-On (Kickstand) Dollies

A drive-on dolly is a long channel with casters underneath. You roll the bike onto the channel and drop the kickstand onto a plate built into the dolly. The bike rests on both tires and the kickstand, just like it does on the ground.

This is the go-to style for Harleys, cruisers, baggers and big touring bikes. Most of these bikes have no center stand and are too heavy to lift by hand.

3. Cradle and Jack Dollies

A cradle dolly holds the bike by its frame instead of its tires or stands. You lift the bike with a motorcycle jack and rest its frame on the cradle’s padded rails. From there, you can roll the whole setup around the shop. Some cradle dollies are built to carry the jack itself.

This style is best for long builds and engine work, including projects where the wheels come off. It holds the bike at a comfortable working height and keeps it stable for weeks.

4. Flat Platform Dollies

A flat platform dolly is a simple steel plate with casters. It is the easiest way to get a lighter motorcycle or an ATV rolling, and it often pairs with a frame jack for small jobs.

 

How to Choose the Best Motorcycle Dolly for Your Bike

Run through this checklist before you buy. It takes five minutes and can save you a return.

  • Your bike’s stand. Look at what your bike sits on: a center stand or just a kickstand. This one detail rules out half the options.
  • Weight and capacity. Know your bike’s wet weight, with fuel and fluids. Then pick a dolly rated well above it. Our dollies range from 800 lb to 1,500 lb.
  • Frame clearance. For cradle and jack dollies, measure under your bike. The pads need flat frame rails to sit on, with nothing hanging below them like an exhaust or a skid plate.
  • Casters and your floor. Small casters roll well on smooth concrete but can catch on cracks and expansion joints. Locking casters keep the bike from drifting while you work.
  • How you will use it. Parking and storage call for a low dolly. Service work calls for a cradle that holds the bike at a working height.
  • Your garage space. Check how much room you need to spin the bike. A drive-on dolly is long, so it needs more space than a center stand plate.

Get these right, and almost any dolly on this list will serve you well for years.

 

Best Motorcycle Dolly Picks for Every Garage

Here is every motorcycle dolly we carry, sorted by the job each one does best.

Redline CSD1200 Motorcycle Center Stand Dolly

1. Best Motorcycle Center Stand Dolly: Redline CSD1200

The Redline CSD1200 Motorcycle Center Stand Dolly is the easiest way to move a bike that has a center stand. Place the bike on its stand on top of the plate, and it is ready to roll in seconds. No changes to your bike are needed.

  • 1,200 lb capacity
  • Laser-cut 3/8″ steel plate, just 2-7/8″ tall
  • 1/2″ ground clearance
  • Heavy-duty diamond rubber mat, 17.5″ wide
  • Low-profile 1-5/8″ casters that lock

Owners have used it with heavy touring bikes like the BMW R1200RT and the 741 lb K1600B. Before you order, measure the distance between your center stand feet. They need to fit inside the 17.5″ mat. If your casters ever wear out, you can swap in CSD1200 replacement wheels instead of buying a new dolly.

Redline CSD1200 Motorcycle Dolly With Scissor Jack

2. Best for Bikes Without a Center Stand: Redline CSD1200 With Scissor Jack

No center stand? The Redline CSD1200 Motorcycle Dolly With Scissor Jack solves that. It pairs the same CSD1200 dolly with the RE-FJ frame jack, so you can lift the bike by its frame and set it on the dolly.

  • Same 1,200 lb CSD1200 dolly
  • RE-FJ frame jack lifts up to 1,000 lb
  • Jack lifts to 16.5″ for wheel and chain work
  • Jack comes off when you do not need it

The jack is handy on its own. You can use it for tire changes and chain cleaning. For heavy service work, Redline suggests working with the bike on the jack and using the dolly for moving and parking. Casters are less steady than a jack under a heavy load.

Merrick 1,500 Lb Motorcycle Harley Davidson Dolly

3. Best Motorcycle Dolly for Harley Davidson: Merrick 1,500 lb Dolly

The Merrick 1,500 lb Motorcycle Harley Davidson Dolly is a drive-on dolly made for big cruisers and touring bikes. You roll the bike onto the channel and set the kickstand on the steel plate. From there, you can move it anywhere in your garage.

  • 1,500 lb capacity
  • 82″ working length fits long wheelbases
  • 1/4″ thick kickstand plate
  • 10 ball-bearing swivel casters
  • 1/8″ steel frame, American-made

This is the simplest choice if you ride a Harley or any heavy cruiser with no center stand. No jack and no lifting. Just ride or push it on.

Redline SD1K ATV Motorcycle Engine Cradle Dolly

4. Best for Long Builds: Redline SD1K Engine Cradle Dolly

The Redline SD1K ATV Motorcycle Engine Cradle Dolly is the most-reviewed dolly in our lineup, with a 4.9 rating from 16 reviews. It holds the bike by its frame, so the wheels can come off while the bike still rolls.

  • 1,000 lb capacity
  • Three height settings: 12″, 13-1/2″ and 15″
  • Adjustable width from 12-5/8″ to 19-3/4″ with pads
  • Rubber pads protect your frame
  • Four tie-down points and 3″ swivel casters

Owners use it for long-term builds and for service at a comfortable height. One reviewer runs it under a Road King. It works for motorcycles and four-wheelers alike. When the casters wear down, grab an SD1K replacement caster set.

Redline RL135 / SD1K Lift Jack Cradle Dolly Combo

5. Best Lift and Move Kit: Redline RL135 and SD1K Combo

If you don’t own a motorcycle jack yet, the Redline RL135 and SD1K Lift Jack Cradle Dolly Combo gives you both in one order.

  • RL135 jack lifts 1,250 lb
  • Jack range from 4-1/2″ up to 15″
  • Six-position safety locks
  • SD1K cradle dolly included

Customers have used this combo on Harley models like the Ultra Limited and Street Glide. Measure under your bike first. Some bikes, like the Gold Wing DCT, lack the flat frame rails this setup needs. You can find more lift options in our ATV and cycle jacks section.

K&L Supply MC460 Motorcycle Engine Cradle Dolly

6. Best for Pro Shops: K&L Supply MC460 Engine Cradle Dolly

The K&L Supply MC460 Motorcycle Engine Cradle Dolly is a heavy-duty shop cradle made to work with K&L jacks.

  • 1,200 lb capacity
  • Height adjusts from 12″ to 15″
  • Width adjusts from 13″ to 20″
  • Swivel neoprene wheels and four tie-down loops

It works with K&L Center Jacks and Fat Jacks. It also takes custom uplift-style jacks. If your shop already runs K&L gear, this cradle fits right into your setup.

K&L Supply MC464 Fat Jack Motorcycle ATV Dolly

7. Best for K&L Fat Jack Owners: K&L Supply MC464 Fat Jack Dolly

The K&L Supply MC464 Fat Jack Motorcycle ATV Dolly lets you roll a bike while it sits on a K&L MC455 Fat Jack.

  • 1,100 lb capacity
  • Zinc-plated frame that resists rust
  • 360-degree rolling
  • Jack sold separately

This dolly makes the most sense if your shop already owns a Fat Jack. Lift the bike on the jack, then set the jack on the dolly and move it wherever you need it.

Redline Power Sports Motorcycle ATV Dolly

8. Best Budget Pick for Light Bikes and ATVs: Redline Power Sports Dolly

The Redline Power Sports Motorcycle ATV Dolly is the most affordable way to roll a lighter bike or quad.

  • 800 lb capacity
  • Laser-cut steel plate
  • Overall size of 23-5/8″ x 21-5/8″
  • Optional motorcycle or ATV frame jack

It fits dirt bikes and ATVs you can move around the garage with minimal fuss.

9. Other Dollies in Our Lineup

Our dolly section also carries the Merrick 12″ Auto Dolly Pair for moving cars and trikes, and the K&L Supply Watercraft Dolly for jet skis. These are not built for motorcycles, but they are worth a look if you store more than bikes in your garage.

 

Using a Motorcycle Dolly for Garage Storage

A garage dolly is one of the best ways to free up floor space. A bike on a dolly can sit inches from a wall and still come out in seconds. Here are some ways to get the most out of it:

  • Park bikes side by side. With each bike on a dolly, you can pack them closer and roll out the one you want without moving the others.
  • Make winter storage easier. Your bike stays up and steady all season, and you can roll it aside to sweep or clean the floor.
  • Add a wheel chock for long-term parking. A chock or strap adds peace of mind if the bike sits for months. Browse our motorcycle wheel chocks if you need one.
  • Leave turning room. Give yourself enough space to spin the bike. Drive-on dollies need more room than center stand plates.

If you also want to lift the bike for service, pair your dolly with a lift table. Our guide to motorcycle lift tables covers the top options.

 

How to Use a Motorcycle Dolly Safely

A dolly makes moving your bike much easier, but a few simple habits keep you and your bike safe.

On a center stand dolly:

  • Slide the dolly under the center stand with the casters locked.
  • Rock the bike up onto its stand so both feet land fully on the mat.
  • Unlock the casters and push gently from the frame.
  • Lock the casters again before you walk away.

On a drive-on dolly:

  • Lock the casters and line the dolly up straight with the bike.
  • Roll the bike on slowly and drop the kickstand onto the plate.
  • Unlock the casters and push from the frame or seat area.
  • Strap the bike down if you’ll store it on the dolly for a while.

Safety tips for every style:

  • Use a dolly only on a flat, clean floor.
  • Push from the frame instead of the handlebars.
  • Move slowly and keep your feet clear of the casters.
  • Never start or run the engine while the bike is on the dolly.

 

Motorcycle Dolly vs Other Garage Gear

A dolly works best alongside other tools. Here is how it compares:

  • Lift table. A lift table raises your bike to waist height so you can work standing up. A dolly is for moving and parking. Many riders own both.
  • Wheel chock. A chock holds the front wheel still. A dolly lets the whole bike roll. Use a chock when you want the bike locked in one spot.
  • Tow dolly. A tow dolly hauls a bike behind a vehicle on the road. It is a trailer, not a garage tool. Our guide to transporting a motorcycle covers your hauling options.
  • Paddock stand. A paddock stand lifts one wheel for chain or tire work. It does not move the bike around.

For a full list of gear every home mechanic should own, see our must-have motorcycle tools list.

 

Frequently Asked Questions

Q) Do you need a center stand to use a motorcycle dolly?

Only if you want a center stand dolly like the CSD1200. If your bike has only a kickstand, you have two choices. You can use a drive-on dolly that holds the bike on its tires and kickstand, or you can lift the frame with a jack and set it on a cradle or a scissor-jack dolly.

Q) What is the best motorcycle dolly for a Harley-Davidson?

For parking and storage, a drive-on dolly like the Merrick 1,500 lb dolly is the easiest choice. You roll the bike on and set the kickstand down. For service work, a jack-and-cradle setup like the RL135 and SD1K combo holds a Harley at a good working height. Measure under your frame before you buy a cradle.

Q) Is a motorcycle dolly worth it for a small garage?

Yes. A dolly is most useful in tight spaces. You can park your bike sideways against a wall and roll it out without moving the car or the other bikes. Center stand dollies take up the least room.

Q) What should you look for when buying a motorcycle dolly?

Start with your bike’s stand type and its wet weight. If you want a cradle, check frame clearance, and look at caster size and locks. Last, think about how you will use it. Low dollies suit parking and storage, while cradles suit service work.

Q) Can you use a motorcycle dolly for an ATV?

Many of them, yes. The Redline SD1K and the Power Sports dolly are both built for motorcycles and ATVs. Check the quad’s width and make sure the pads or plate can support its frame.

Q) How much weight can a motorcycle dolly hold?

It depends on the model. Our dollies range from 800 lb to 1,500 lb. Choose one rated well above your bike’s wet weight for a safe margin.

Q) Is a motorcycle dolly the same as a tow dolly?

They are two different tools. A motorcycle dolly is a garage tool for moving a parked bike around on the floor. A tow dolly is a small trailer that hauls a motorcycle behind a vehicle. Each one solves a different problem.

Q) How do you maintain a motorcycle dolly?

Check the casters and bolts every few months. Clear out dirt and small stones that get stuck in the wheels, and add a little grease to swivel points and pivots. When the casters wear out, replace them instead of the whole dolly. We carry replacement swivel casters for CSD dollies as well as sets for the SD1K.

Q) Do you need a wheel chock with a motorcycle dolly?

For quick moves around the garage, you can skip it. For long-term storage, a wheel chock or a tie-down strap adds extra stability and keeps the bike from shifting on the dolly.

 

Find the Best Motorcycle Dolly for Your Bike

Choosing the best motorcycle dolly depends on your bike’s stand and how you plan to use it. Center-stand bikes roll best on a center-stand dolly, and heavy cruisers do best on a drive-on dolly. Long builds call for a cradle and jack, while light bikes and ATVs are happy on a flat platform.

Redline Stands has helped riders and shops set up their garages since 2002. Most of our dollies ship free, and every model is built to handle years of daily use. Browse our full range of motorcycle dollies and find the right fit for your bike today. Not sure which one fits? Send us your bike’s make, model, year and a few measurements, and our team will point you in the right direction.

Leave a Reply

Your email address will not be published. Required fields are marked *