Website Feedback


Add your email address to take a quick survey and receive $10.00 off your next order!


Redline MC1K 1000 lb Motorcycle ATV Lift Table

Model: MC1K

(3 reviews)

Optional Accessories

Include RE-FJ Motorcycle Frame Jack

Include RE-ATVJK ATV Frame Jack

RMC1 Redline Wheel Chock

Include Side Extensions

Redline RE-AR 3/8" Air Hose Reel
Capacity by LBS
Truck carriers charge extra to deliver to locations that have no forklift on site, and also for any location not on commercially zoned property. This includes businesses run from your home property, and next door to it. These are not Redline’s fees and sadly they are unavoidable. All truck carriers charge them.



The Redline Engineering MC1K is air powered and made from thick 1/8th inch diamond steel plate with a 1,000 lb lifting capacity. This lift comes equipped with a front extension that provides you with an extra long working table so that even your longest motorcycle won't have a problem fitting on the 97" long work space. The MC1K lifts to a max of 35" and comes outfitted with a front wheel vise, detachable ramp, and rear wheel drop out panel that makes this 1,000 lb capacity lift the perfect addition to any shop or home garage. Thanks for looking; we hope to hear from you soon!

• 1 year parts warranty
• Air line wrapped w/ steel wire
• Dolly included w/ side extensions, not w/ lift
• Includes free front extension & wheel vise

• Don’t use the front extension panel unless it’s actually needed
• Using a front extension with a short/standard length motorcycle can concentrate too much weight toward the front of the table, making it unstable

• Wheel vise alone not sufficient
• Motorcycle ratchet straps mandatory

Show more


• 35'' lifting height
• 7'' lowered height
• 84'' table length standard
• 1000 pound lifting capacity
• 48'' table width with side panels
• Support pole holes: 1.5" diameter holes
• Support pole holes (Center to center): 73"
• Side extension panes: 84" L x 12" W x 2" H
• Power Supply - Min. 90 PSI / Max. 155 PSI
• Locking positions: 32" - 29" - 25.5" - 22" - 18"
• 97'' table length with free included front extension
• 24'' table width without side panels (side panels extra)



• Download the pdf manual HERE


• Shipping dims 89" x 27.5" x 13" Class 65
• Residential deliveries cost $124.95 extra
• $150 discount Pensacola, FL pickup M-F 1-5
• Shipping to business with forklift preferred
• Local truck terminal dock pickups available
• Pensacola, FL pickups – read our policies HERE
• Crated weight: 374 lbs without side extensions / 505 lbs with side extensions
• Free shipping applies to $200 maximum. If shipping exceeds this amount a surcharge may be needed




4.3 / 5 (3 reviews)
Based on 3 Reviews Write review
  • Warren Dondero Jan 4, 2020


    Jan 4, 2020
    Just picked up my MC1K for my garage It was packaged heavy duty. No issues with the shipping. .Assembled in less than 1 hour with 2 people. Very sturdy. No issues lifting my 81 Suzuki GS 1100. Glad I got the side extenders. What really sold me on it was their video and Schnitz Racing recommending it.
  • Brandon Sep 13, 2018

    Well built, solid, and fast lift.

    Sep 13, 2018
    Recieved the lift and had her going up and down / fully assembled in under an hour. Lift arrived in plywood crate and paid for residential liftgate service. I read the other guys review about psi issues and saw a video on utube with a street glide not able to get to the highest position with a 150psi kobalt compressor. I purchased a 175psi husky 30gallon and my street glide 2008 goes up and down at least 3 times with the tank full and compressor off and regulator set at 150psi. Not sure if the guy on utube has compressor issues or what but 150 psi works for me. The only downside I have seen with this lift is the lettering on the sides of the lift are missing. Bummer because after using this lift for a week, I am loving the this thing and want to show off the brand. The sales guys have assured me they will mail some out to me, but we will see.
  • Dan Apr 6, 2018

    Ok lift for the money, Read all the specs before you buy!

    Apr 6, 2018
    Yes this will lift 1000 lb if you have 155psi to it. OSA will only let you have 90spi in a shop so good luck. On the plus side the customer service is top notch, I called them to tell them that I could not lift a Husqvarna M-ZT52 it's weight is 760lb. and they called me back and said to send them a video of it in operation and to note the psi that we are running to it, we are running 120psi. it only lifts it about half the way up. below is the reply I received. We have four M-1000c lifts that have no trouble lifting anything that we put on it running at 120psi or less! "I’ve seen some of those MC1K’s need more than 120 psi before in order to lift a full 1,000 lbs. Have a look at the video below. We made that video with 155 psi. I hate to tell you that your air compressor is a bit small for the MC1K but it’s the truth. Now sure, you have an M1000C there and it makes the lift. That’s because it has a larger pneumatic cylinder in the machine and frankly, it’s a heavy duty table, whereas the MC1K is light to medium duty. I actually have that same mower and I’m sorry to tell you it weighs a bit more than that. I weighed mine, which also has a bagger, and it was over 900 lbs. So, after you add the side extensions you’re over 1,000 lbs that the table itself is lifting. Will it still do it? Sure, but it’ll need more air pressure. Sorry to be the bearer of lousy news sir."

Ask & Answer

  • CChurch Apr 24, 2022
    Q. Do you sell a replacement seal kit for the air cylinder?
    A. You mean THIS? Thanks for shopping with Redline!
  • Normzy Mar 30, 2022
    Q. Are your MC1K 1000 lift tables available in Canada
    A. Yes sir. We can ship them to Canada, but be aware you'll need a Canadian customs broker to clear the shipment through customs for you. If you don't have that, you might consider picking it up just across the border in a place like Detroit, and carrying it into Canada yourself, at which time you'd pay your duties/taxes at the point of entry. My apologies but we are unable to estimate your duties/taxes because we only ship "out" of the USA and we never handle getting anything "into" Canada. Thanks Norm!
  • B Mar 23, 2022
    Q. Does this come with the wheel vise
    A. Yes it does.
  • David Aug 06, 2021
    Q. What do you recommend that's a little bit heavier duty than the MC1K?
    A. Hi David. I recommending checking out our HD1K. It's definitely beefier, and geared more toward professional repair shops that use a lift all day every day. Here's a link sir.
    Click Here


You need to be logged to vote.

  1. Home
  2. Lifts
  3. Motorcycle & ATV Lifts
  4. Lifting Tables
  5. Redline MC1K 1000 lb Motorcycle ATV Lift Table

Free shipping only applies to products that are marked "free shipping" or "ships free" in the title. Freight ship items have a predetermined max amount that can be spent under our free shipping policy. In the event you reside in an unusually high cost shipping zip code we may alert you that a shipping surcharge may be necessary.

Click OK to view our full shipping policy. Clicking cancel will keep you on the current page.

Search Cart Quote Facebook eBay YouTube Menu Menu