Website Feedback

Email:

Add your email address to take a quick survey and receive $10.00 off your next order!

0

Redline 100 Ton Air Hydraulic Shop Press

Model: RE100T-A

(1 review)

Optional Accessories


Include Rear Facing Guard


Redline RE-AR 3/8" Air Hose Reel


Pin Press Kit


Extra Pair Of Press Plates


U-Weld-It Metal Bending Finger Brake
Brand
Type
Sometimes non-mint condition products are available at a lesser cost. These normally include blemishes like scratches or small dents. Email requests to [email protected] will receive photos of the blemished product before shipping. Blemished products are not available for “free” returns due to said blemish.

Shipping upgrades offered in cart page

The price will increase on 05-01-2024 Reg. $6,499.50 Sale price $5,999.50
8% off

Description

This heavy duty Redline 100 ton hydraulic shop press is an air over hydraulic pressing machine that's a great addition to any shop or garage! Some features include a powder coat finish to help prevent rust, welded shelving inside the carriage for supporting the press plates, a shifting ram cylinder for those oddly shaped items, as well as a winch to help adjust the carriage height. For safety reasons a shop press safety guard is included that reduces the possibility of an object flying out under pressure and hitting the operator. Order your new 200,000 pound capacity hydraulic shop press today from Redline Engineering!

KEY BENEFITS
• CE Certified
• 100 ton capacity
• Powder coated finish
• Requires 120 psi to operate
• 33" movement of carriage up and down
• 6 height adjustments of 5-1/2" increments
• Carriage winch for easy carriage height adjustment
• Ram cylinder capable of shifting both left and right
• Pressure gauge accurate +/- 2.5% of press capacity
• Air powered hydraulic cylinder for heavy duty pressing
• Safety grate can be latched into place in multiple increments
• Welded shelves inside carriage to help support press plates
• Pump is operated either by air or manually pumped at 2 speeds
 

PRESS PLATE RATING
• Each press plate is rated to ½ the tonnage of the press; thus, if applying the press’ maximum force, the load must be distributed over both press plates to avoid damaging the press

Show more

Specs

• Leg length 39"
• Inside frame width: 31"
• Cylinder stroke 11.81"
• Base dims: 47-1/4" x 39"
• Interior carriage length: 16-3/4"
• Cylinder ram diameter 3-1/2"
• Winch cable diameter: 5/32"
• Main frame is 5-5/8" x 5/8"
• Press head to floor: 50-1/2"
• Carriage pin diameter: 2-1/16"
• Safety grate: 30-1/2" x 28-3/4"
• Diameter of cylinder bore 5.511"
• Operates at a 75dB sound rating
• Distance between leg holes: 7-5/8"
• Pressure gauge accurate to +/- 2.5%
• Pump pressure 9,235 psi (63.7 Mpa)
• Overall dims 52-1/2" L x 39" W x 73" H
• Interior carriage shelf-to-shelf depth: 9"
• Cylinder piston/bore diameter: 5.51181"
• Middle carriage 13-3/8" L x 42-1/4" W x 13" H
• Press head to carriage (lowest position): 29-1/2"
• Two heavy duty press plates 13-3/4" L x 5-1/8" W x 6-5/8" H
• Work dims between cylinder and press plates:
-Min height from cylinder: 1-3/4"
-Max height from cylinder: 29-1/4"

Downloads

• Download the manual pdf HERE
• Download the pump breakdown pdf HERE

Shipping

• Residential deliveries cost extra
• Ships to commercial location w/ forklift
• Ships 1625 lbs. at 81" x 45" x 23" (1 piece)
• Units available in Pensacola, FL with rebate
• Pensacola, FL pickups – read our policies HERE
• Free shipping applies to $400 maximum. If shipping exceeds this amount a surcharge may be needed

 

Videos

Reviews

5.0 / 5 (1 review)
Based on 1 review Write review
  • Elberto Apr 7, 2023

    Worth the extra money

    Apr 7, 2023
    Like that it has two speeds my last press was air powered too but only had one speed. I use the fast setting to take up the gap and then change to the lower speed to finish the job. I was worried that you get what you pay for but in this case you get a lot of machine and it works well for way less than other brands You won’t be disappointed.

Ask & Answer

  • Tiller Sep 11, 2023
    Q. How many psi is the ram rated for?
    A. We pressurize these cylinders to 9,200 psi in order to make 100 tons of force. We do not know if they'll handle more pressure than that. Thanks for your question!
  • Scott Sep 13, 2022
    Q. What type of hydraulic fluid and how much does it take to fill..thanks
    A. The factory recommends #15 hydraulic fluid and says it holds just over 5 quarts. Thanks Scott!

ASK A “PUBLICLY POSTED” QUESTION

You need to be logged to vote.



Frequently Bought Together

  1. Home
  2. Copy Category
  3. Heavy Duty
  4. Redline 100 Ton Air Hydraulic Shop Press

Free shipping only applies to products that are marked "free shipping" or "ships free" in the title. Freight ship items have a predetermined max amount that can be spent under our free shipping policy. In the event you reside in an unusually high cost shipping zip code we may alert you that a shipping surcharge may be necessary.

Click OK to view our full shipping policy. Clicking cancel will keep you on the current page.

Search Cart Quote Facebook eBay YouTube Menu Menu