I have two 0ne ton diesel crew cab pickups. those are the largest vehicles I would lift. Is this lift the correct size for me?

Probably, but you need to weigh your heaviest truck on a CAT scale at a truck stop and make sure neither the front nor rear axle are heavier than 5,500 lbs. It doesn't matter if the truck is 10,000 lbs. It only matters that one end of it is not over 5,500 lbs. I realize this is a hassle to do, but it's far less trouble than being buried because you bought a lift too small. Thanks for shopping with us!

What is the outside column width at an elevation of 11 feet (or higher) above finished floor? Trying to fit this unit between trusses in a pole building.

I measured outside to outside on the lock release covers and that measurement is 133”. Thanks Nick!

Launch Asymmetric 2 Post Clearfloor Lift ALI Certified

The Launch 11K Asymmetric 2 Post Lift is a heavy-duty lift that is perfect for lifting the smallest economy cars to the largest SUV's and front-end heavy diesel pickups. This direct drive lift features double telescoping screw pads that offer 6.5" adjustment, rubber door guards that provide added security against door damage, four 6" and 3" stackable foot pad extensions, and 3 stage front arms. Order yours today!

KEY BENEFITS
• Direct drive
• ALI/ETL certified
• 3 stage front arms
• 11,000 lb. capacity
• Standard asymmetric
• Heavy-duty arm restraint system
• Non-adjustable narrow bay setting
• Ideal for auto passenger cars & light duty trucks
• Four 6" and four 3" stackable foot pad extensions
• Outer hose guards protects hydraulic hoses from damage
• Rubber door guards provide added security against door damage
• Adjustable column height provides an extra 6" of height adjustment for ease of installation
• Single point lock release allows technicians to disengage both column locks simultaneously
• Double telescoping screw pads when used with/without rubber pads offer 6.5" adjustment

RETURNS
• Our supplier does not accept returns on this item
• In event of warranty claim, replacement part(s) will be sent

• Motor: 2HP
• Total width: 137.8"
• Rise speed: 54 seconds
• Max lifting height: 75.6"
• Min column height: 143"
• Max column height: 149"
• Drive-thru clearance: 96"
• Inside column width: 108"
• Cylinder full height: 145.4"
• Max load per arm: 2750 lbs.
• Screw pad height: 4.3" - 7.8"
• Floor to overhead switch: 140"
• Min ceiling height required: 143.5"
• Voltage: 208-230 / 60Hz / single phase
• Rear arm reach (min/max): 38.6" / 61.8"
• Front arm reach (min/max): 23.6" / 39.4"

• Browse the full manufacturer catalog HERE
• Download the spec pdf HERE
• Download the manual pdf HERE

• Residential deliveries not possible
• Ships L 150", W 24", H 45" at 2120 lbs.
• Ships LTL truck freight to business w/ forklift
• Can be picked up at local truck dock terminal
• Call for availability at Cleburne, TX - pickup fees apply
• Free shipping applies to $700 maximum. If shipping exceeds this amount a surcharge may be needed