Website Feedback

Email:

Add your email address to take a quick survey and receive $10.00 off your next order!

(0)

Redline 50 Ton Electric Hydraulic Shop Press

Model: RE50T-E

(1 review)

Optional Accessories


Pin Press Kit


10ft. Electrical Cord
Brand
Type
Truck carriers charge extra to deliver to locations that have no forklift on site, and also for any location not on commercially zoned property. This includes businesses run from your home property, and next door to it. These are not Redline’s fees and sadly they are unavoidable. All truck carriers charge them.

$4,399.50
Sold Out

Description

This industrial Redline 50 ton hydraulic shop press is an electric over hydraulic pressing machine perfect for manufacturing, auto repair, or general mechanical work. It features a electric powered hydraulic pump for heavy duty pressing, a safety guard with multiple increments, and a crank style carriage winch for easy adjustment of the middle carriage. On top of the hydraulic fluid tank is a tonnage gauge to inform you of how much pressure you are currently using. Order your new 100,000 pound capacity hydraulic shop press today from Redline Engineering!
 

KEY BENEFITS
• 50 ton capacity
• Powder coated finish
• Ram moves 2" in 5 seconds
• 44" movement of carriage up and down
• 8 height adjustments of 5-1/2" increments
• Carriage winch for easy carriage height adjustment
• Ram cylinder capable of shifting both left and right
• Pressure gauge accurate +/- 2.5% of press capacity
• Electric powered hydraulic cylinder for heavy duty pressing
• Safety grate can be latched into place in multiple increments
• Welded shelves inside carriage to help support press plates
• Machine does not come with a power cord.  Customer will need to either hard-wire power to the machine or supply a power cord
IMPORTANT NOTES
• Pump does not come pre-filled with hydraulic fluid
• 7-8 gallons of #32 hydraulic fluid will be needed to operate the pump
• Long and/or thin extension cords are not recommended as amp loss could damage the motor
 

PRESS PLATE RATING
• Each press plate is rated to ½ the tonnage of the press; thus, if applying the press’ maximum force, the load must be distributed over both press plates to avoid damaging the press

Show more

Specs

• Leg length 31-1/2"
• Cylinder stroke 8.15"
• Ram diameter 100mm
• Inside frame length 28-3/4"
• Winch cable diameter: 5/32"
• Main frame is 3-1/2" x 1/2"
• Cylinder ram diameter 2-1/2"
• Carriage pin diameter: 1-3/16"
• Safety grate: 24-3/8" x 26-1/2"
• Inside carriage width: 7-1/2"
• Interior carriage length:16-1/4
• Full travel time: 20 seconds
• Piston retraction time: 26 seconds
• Maximum pump pressure 9,000 psi
• Pressure gauge accurate to +/- 2.5%
• Overall dims 62" L x 31-1/2" W x 72" H
• Cylinder piston/bore diameter: 3.937"
• Inside carriage shelf-to-shelf depth: 7-1/4"
• Middle carriage 35-7/8" L x 10-3/16" W x 9-13/16" H
• Two heavy duty press plates 10-15/16" L x 5-1/8" W x 1-3/8" thickness
• Work dims between cylinder and press plates:
-Min height from cylinder: 1-11/16"
-Max height from cylinder: 40"

ELECTRIC MOTOR
• 60 Hz
• 110 V
• 1700 RPM
• 19.12 AMP
• 2 Hp electric motor

Downloads

• Download the manual pdf HERE

Shipping

• Ships 2 pieces:
   764 lbs. at 83" x 39" x 13" class 60
   179 lbs. at 21" x 15" x 32" class 60
• Residential deliveries cost extra
• Ships to commercial location w/ forklift
• Units available in Pensacola, FL with rebate
• Pensacola, FL pickups – read our policies HERE
• Free shipping applies to $250 maximum. If shipping exceeds this amount a surcharge may be needed

 

Videos

Reviews

5.0 / 5 (1 review)
Based on 1 review Write review
  • Chris Behnken May 23, 2020

    Badass!

    May 23, 2020
    This unit is badass, we run a drivetrain and manual transmission rebuilding service @ rvenge performance and a air over hydraulic press was just slowing us down too much. This thing is 8 times faster than our air/hydro 40 ton unit we had before and it really speeds up work. Sets up easily, few parts to really install. You may want a friend when putting it upright, we just used an engine hoist and heavy strap to pick it up by the upper header and it was really easy. Just be careful, its about 900 lbs. To put the power unit on we just used a jack to get it close and it was also really easy. Our unit only took about 5 gallons of aw32 just FYI, you may only need one bucket. Very well built, quiet (no more need for ear muffs like the air one needed), fast, and doesn't deflect at all. Redline also ships very fast. We ordered on a Monday and had it here and setup on a Friday. Presses with all the features this one has were double the cost. Thanks Redline!
Redline 50 Ton Electric Hydraulic Shop Press

Free shipping only applies to products that are marked "free shipping" or "ships free" in the title. Freight ship items have a predetermined max amount that can be spent under our free shipping policy. In the event you reside in an unusually high cost shipping zip code we may alert you that a shipping surcharge may be necessary.

Click OK to view our full shipping policy. Clicking cancel will keep you on the current page.

Search Cart Quote Facebook eBay YouTube Menu Menu