Shopping cart 0

Redline 100 Ton Air Hydraulic Shop Press

Model: RE100T-A

(1 review)

Please Choose:

Optional Accessories

A generic image
3/8" Air Hose Reel (RE-AR)

A generic image
Include Rear Facing Guard (RE-PGG)

A generic image
Pin Press Kit (RE-SPPH)

A generic image
Extra Pair Of Press Plates (RE-PLTS)

A generic image
U-Weld-It Metal Bending Finger Brake (HDFB)
Brand
Type

Shipping upgrades offered in cart page

$6,999.50
box icon

In Stock in

Pensacola
delivery icon

Usually Ships Within

24-48 Hrs

Description

This heavy duty Redline 100 ton hydraulic shop press is an air over hydraulic pressing machine that's a great addition to any shop or garage! Some features include a powder coat finish to help prevent rust, welded shelving inside the carriage for supporting the press plates, a shifting ram cylinder for those oddly shaped items, as well as a winch to help adjust the carriage height. For safety reasons a shop press safety guard is included that reduces the possibility of an object flying out under pressure and hitting the operator. Order your new 200,000 pound capacity hydraulic shop press today from Redline Engineering!

KEY BENEFITS

• Covered by Redline's 1-Year parts warranty
• CE Certified
• 100 ton capacity
• Powder coated finish
• Requires 120 psi to operate
• 33" movement of carriage up and down
• 6 height adjustments of 5-1/2" increments
• Carriage winch for easy carriage height adjustment
• Ram cylinder capable of shifting both left and right
• Pressure gauge accurate +/- 2.5% of press capacity
• Air powered hydraulic cylinder for heavy duty pressing
• Safety grate can be latched into place in multiple increments
• Welded shelves inside carriage to help support press plates
• Pump is operated either by air or manually pumped at 2 speeds
• Optional pin kit may arrive with pin kit rack featuring yellow zinc chromate finish or powder coated black

 

PRESS PLATE RATING
• Each press plate is rated to ½ the tonnage of the press; thus, if applying the press’ maximum force, the load must be distributed over both press plates to avoid damaging the press

Show more

Specs

• Leg length 39"
• 95 seconds to reach full stroke
• Approx. 1” per 8 seconds
• Inside frame width: 31"
• Cylinder stroke 11.81"
• Base dims: 47-1/4" x 39"
• Interior carriage length: 16-3/4"
• Cylinder ram diameter 3-1/2"
• Winch cable diameter: 5/32"
• Main frame is 5-5/8" x 5/8"
• Press head to floor: 50-1/2"
• Carriage pin diameter: 2-1/16"
• Safety grate: 30-1/2" x 28-3/4"
• Diameter of cylinder bore 5.511"
• Operates at a 75dB sound rating
• Distance between leg holes: 7-5/8"
• Pressure gauge accurate to +/- 2.5%
• Pump pressure 9,235 psi (63.7 Mpa)
• Overall dims 52-1/2" L x 39" W x 73" H
• Interior carriage shelf-to-shelf depth: 9"
• Cylinder piston/bore diameter: 5.51181"
• Middle carriage 13-3/8" L x 42-1/4" W x 13" H
• Press head to carriage (lowest position): 29-1/2"
• Two heavy duty press plates 13-3/4" L x 5-1/8" W x 6-5/8" H
• Work dims between cylinder and press plates:
-Min height from cylinder: 1-3/4"
-Max height from cylinder: 29-1/4"

Downloads

• Download the manual pdf HERE
• Download the parts diagram pdf HERE
• Download the pump breakdown pdf HERE

Shipping

Too heavy to unload via lift gate – forklift required

• Residential deliveries cost extra
• Ships to commercial location w/ forklift
• Ships 1625 lbs. at 81" x 45" x 23" (1 piece)
• Units available in Pensacola, FL with rebate
• Pensacola, FL pickups – read our policies HERE
• Free shipping applies to $400 maximum. If shipping exceeds this amount a surcharge may be needed

 

Videos

Reviews

5.0 / 5 (1 review)
Based on 1 review Write review
  • Elberto Apr 7, 2023

    Worth the extra money

    Apr 7, 2023
    Like that it has two speeds my last press was air powered too but only had one speed. I use the fast setting to take up the gap and then change to the lower speed to finish the job. I was worried that you get what you pay for but in this case you get a lot of machine and it works well for way less than other brands You won’t be disappointed.

Ask & Answer

  • Tiller Sep 11, 2023
    Q. How many psi is the ram rated for?
    A. We pressurize these cylinders to 9,200 psi in order to make 100 tons of force. We do not know if they'll handle more pressure than that. Thanks for your question!
  • Scott Sep 13, 2022
    Q. What type of hydraulic fluid and how much does it take to fill..thanks
    A. The factory recommends #15 hydraulic fluid and says it holds just over 5 quarts. Thanks Scott!

ASK A “PUBLICLY POSTED” QUESTION

You need to be logged to vote.



  1. Home
  2. Shop Equipment
  3. Hydraulic Shop Press
  4. All Shop Presses
  5. Redline 100 Ton Air Hydraulic Shop Press