Website Feedback

Email:

Add your email address to take a quick survey and receive $10.00 off your next order!

0

Product Reviews From Yakima, Washington

1 - 29 of 29 reviews
  • J 03.14.2024
    Jon S. of Hermitage, Tennesseesays:
    0 years 0 months ago
    4.7
    1 reviews
    Redline CSD1200 Motorcycle Center Stand Dolly

    Should have got one years ago

    It’s kinda handy rotating your bike 180 degrees in the garage. Plus I can push it an extra couple inches in any direction to store the bike optimally. Quite stable when put on center stand with the safety strap put in place...Read more
    It’s kinda handy rotating your bike 180 degrees in the garage. Plus I can push it an extra couple inches in any direction to store the bike optimally. Quite stable when put on center stand with the safety strap put in place to prevent the center stand from unloading your bike while driving it around.Read less
  • C 01.24.2024
    Christopher T. of Whitehouse, Ohiosays:
    0 years 2 months ago
    4.7
    2 reviews
    Redline 2200HD UTV/ATV Lift Table

    Great lift for a Grasshopper zero-turn

    I needed a table lift as I have knee problems and found it difficult to work on my mower and deck. I researched a lot of table lifts and I was surprised there weren't that many that are affordable for this single purpose. I settled...Read more
    I needed a table lift as I have knee problems and found it difficult to work on my mower and deck. I researched a lot of table lifts and I was surprised there weren't that many that are affordable for this single purpose. I settled on the 2200HD. After having this for a year, overall I am giving it 4 stars. A couple of reasons that kept it from 5 stars are: a few of the table end welds were extremely poor. 1/2" - 1" ragged gaps. Seriously, I am disappointed this made it past Q/C. Sent photos and all the company could do was offer $100 credit. In my opinion, the defects were enough to warrant replacement parts. It still is a sour spot for me having to look at them as a high schooler could have made better welds. Secondly, the deck tends to twist or torque once I start lifting the mower. The Mower weight is 900 lbs and the deck is rated at 2200 lbs. Third is the electric hydraulic motor. You can't plug this into even a heavy short extension cord(#12 wire). It bogs down. Hopefully, if I run a separate box with outlets this will correct this issue. I have a question into their support. Lastly, I need a Deck Hand for the 2200HD but don't see one listed for this model anymore. I hope they have one for this model.Read less
  • k 01.15.2024
    kent b. of Ferndale, Washingtonsays:
    0 years 2 months ago
    4.7
    1 reviews
    Triumph 8K Parking Storage 4 Post Lift

    Best Deal out there

    ...Read more
    We purchased our NSS-8XLT about 3years ago and totally love it. Easy to assemble only needed one other person to help with runway with the ram and help hold the pump up. BUT 2 is advised. Use it on chevy 1500, and Polaris RzR'sRead less
  • E 01.9.2024
    Eugene G. of Yakima, Washingtonsays:
    0 years 2 months ago
    4.7
    1 reviews
    Redline Motorcycle Lift Table Hydraulic Pump

    Direct replacement for Ranger RML 1500XL for us!

    Got the pump today and 15 minutes later was working on our RML-1500xl ranger lift. Also it is rebuild-able compared to ranger non rebuild-able pump! Very happy today to have a reliable solution. Shipped fast and packaged well....Read more
    Got the pump today and 15 minutes later was working on our RML-1500xl ranger lift. Also it is rebuild-able compared to ranger non rebuild-able pump! Very happy today to have a reliable solution. Shipped fast and packaged well. Thanks Larry and Redline.Read less
  • T 01.6.2024
    TONY W. of Mcloud, Oklahomasays:
    0 years 2 months ago
    4.7
    1 reviews
    Redline 1,100Lb Cap Single Stage Transmission Jack CLEARANCE

    It was GREAT, until it wasn’t…. then it was GREAT again

    I purchased this jack on May 23rd, 2022 to use in the upcoming transmission replacement of my 2002 Dodge Ram 2500 pickup. When it arrived on the 31st, I opened the crate and began the assembly process. Then I noticed that the...Read more
    I purchased this jack on May 23rd, 2022 to use in the upcoming transmission replacement of my 2002 Dodge Ram 2500 pickup. When it arrived on the 31st, I opened the crate and began the assembly process. Then I noticed that the chains & hardware that go on top of the plate weren’t there. At that moment I thought this was going to be a total clusterf**k and that I would end up regretting the purchase. I e-mailed customer support about the missing items. After a few back & forth e-mails, and me sending them pictures of the assembled jack next to the empty crate, they quickly sent the parts that had been missing.
    The June transmission swap went without a hitch. The jack worked flawlessly, up and down several times in the process. It handled my 47RE transmission like a champ.
    When I finished using the jack I rolled it into a corner of my shop to collect dust until the next time I would need it.
    Fast forward to August 21st, 2023, when I needed it to R & I the gas tank in my 1982 F-150 to replace the fuel pump. I raised the pickup on my lift, un-hooked all the fuel lines and wiring and loosened the mounting strap bolts. I rolled the jack over and raised it to meet the gas tank, taking the weight off the bolts so I could remove them. When I was ready to lower the tank, the release knob on the jack wouldn’t turn either direction. I tried with some force, hoping not to break anything in the process, but it would not turn. So I put the bolts back in to hold the tank in place. Fortunately there was enough height left in my lift that I was able to lift the truck off the jack and get it out of the way.
    I knew the jack had a 1 year warranty, but I hoped that Redline Stands would still cover it even though it was about 3 months past the 1 year mark. I sent an e-mail to customer service and got a reply from Stephan at tech support within an hour or so. He had me send him a short video of what was happening with the jack so they could get with the supplier for a solution.
    Stephan e-mailed me the next day letting me know they were still waiting for the supplier to get back to them.
    I’ve been a mechanic for almost 40 years, so I’m not afraid to take stuff apart and put it back together. However, not knowing exactly how this jack functioned, I didn’t want to take the risk of breaking something in case Redline Stands would eventually warranty it. In reality I knew it wouldn’t be cost-effective to ship it back and have them ship me a replacement.
    Stephan suggested I try to repair it myself. I asked him to find me a schematic, which he did, but it was extremely vague and somewhat blurry so I couldn’t tell what the pieces looked like or in what order they were assembled.
    Two days later I received an e-mail from Stephan that contained a video of a person at the factory disassembling the jack. What a lifesaver! I did exactly what the guy did and had the jack repaired in minutes. It was just a knob return spring that had somehow gotten bound up inside the knob.
    I got to use it on my fuel pump job after all. I used it again just before Christmas, 2023, for the transmission replacement in another of my vehicles.
    The bottom line is that even though this transmission jack (and probably most others) was made in China, it’s not a piece of junk. It’s actually put together quite well. Moreover, if you buy something from Redline Stands and need customer service for any reason whatsoever, these folks are the absolute best. Thank you, Stephan.
    Read less
  • M 01.3.2024
    Matt of Charlotte, North Carolinasays:
    0 years 2 months ago
    4.7
    1 reviews
    FAKE P-Ayr 4.6 Ford OHV Dual Cam Long Motor Block

    Fantastic for shows and displays

    We bought this as part of a booth display to show how our products could function for combustion engine testing and development. It is light enough for a single person to carry, yet detailed enough to be eye-catching and spur...Read more
    We bought this as part of a booth display to show how our products could function for combustion engine testing and development. It is light enough for a single person to carry, yet detailed enough to be eye-catching and spur spontaneous conversations. With how easy it was to mount labels, tubes, and wires, this is a great alternative for those who don't need a functional engine to display.Read less
  • S 12.31.2023
    Sean T. of Rancho Cordova, Californiasays:
    0 years 2 months ago
    4.7
    1 reviews
    Redline Engineering DT1K Air Drop Tail Motorcycle Lift Table

    Great Choice

    I was searching the internet for a good garage lift to accommodate my Harley Roadglide. Looking through all the sites and lifts out there, I came across the Redline DT1K. It was a great lift with all the accessories included for...Read more
    I was searching the internet for a good garage lift to accommodate my Harley Roadglide. Looking through all the sites and lifts out there, I came across the Redline DT1K. It was a great lift with all the accessories included for a great price. Upon arriving, I could see the excellence in craftsmanship. Despite what other reviews say, I was able to lift my 900lb bike without issue using a small shop compressor with a 2 gallon storage tank, pushing 2.2 scfm at 90psi. You won’t be disappointed!Read less
  • J 12.30.2023
    John C. of Saint Cloud, Floridasays:
    0 years 2 months ago
    4.7
    1 reviews
    K&L Table Dolly & Retractable Wheel Kit

    K&L lift table dolly w/ retractable wheel kit

    Purchased this item Jan 2023 have been more then satisfied with it's quality & the way it works as advertised. I can lower the wheels & move my lift any where in my shop with ease & once I retract the wheels the lift...Read more
    Purchased this item Jan 2023 have been more then satisfied with it's quality & the way it works as advertised. I can lower the wheels & move my lift any where in my shop with ease & once I retract the wheels the lift does not move. Great product & well worth the cost.Read less
  • C 12.27.2023
    Conner D. of Martinsburg, West Virginiasays:
    0 years 3 months ago
    4.7
    1 reviews
    Redline Classic Car/Truck Automotive Rotisserie

    Great for the Home Restorer

    To start, this truly is a great rotisserie for the the money. I'm restoring a 1983 Porsche 944 on it and its been great to have. Not doing much if any rust repair, but its made stripping the underside of undercoating a breeze...Read more
    To start, this truly is a great rotisserie for the the money. I'm restoring a 1983 Porsche 944 on it and its been great to have. Not doing much if any rust repair, but its made stripping the underside of undercoating a breeze and surely will make painting later much easier and will help yield a better result. Was super easy to set up and arrived undamaged. If your thinking about getting one for your home restoration I would recommend. It will save you time, your back, and aid in getting that professional result your going for.Read less
  • J 12.27.2023
    Jerry C. of Vancleave, Mississippisays:
    0 years 3 months ago
    4.7
    1 reviews
    Redline MC1K 1000 lb Motorcycle ATV Lift Table

    Perfect!

    Love this thing! Made everything so much easier working on the bike. Make sure to get the extended sides. I turned them upside down and used them as temp tool trays. It’s heavy, so you really need two people to set it up. Once...Read more
    Love this thing! Made everything so much easier working on the bike. Make sure to get the extended sides. I turned them upside down and used them as temp tool trays. It’s heavy, so you really need two people to set it up. Once it’s pieced together it’s really easy to move by one person with the handle and wheels. Had it for three years now with no problems Read less
  • B 12.22.2023
    Brian W. of Lynn, Massachusettssays:
    0 years 3 months ago
    4.7
    3 reviews
    Redline SD1K ATV Motorcycle Engine Cradle Dolly

    Best way to store and/or work on your bike!

    The build quality is great! Having adjustable height is also great! Have my 2008 Street Glide up on it, rolls around with ease! At full height makes it convenient to do engine work. Wish the casters had locks, but it doesn't seem...Read more
    The build quality is great! Having adjustable height is also great! Have my 2008 Street Glide up on it, rolls around with ease! At full height makes it convenient to do engine work. Wish the casters had locks, but it doesn't seem to roll away easily. All in all, I highly recommend! Read less
  • D 12.21.2023
    D of Rapid View, Saskatchewansays:
    0 years 3 months ago
    4.7
    1 reviews
    Redline Heavy Duty Shop Press Arbor Plates Pair

    Impressed

    Very impressed with the quality and extra features. They have detent tabs that push out to prevent them from sliding off the table.
  • J 12.7.2023
    Jeffery O. of Susanville, Californiasays:
    0 years 3 months ago
    4.7
    1 reviews
    Harbor Freight Motorcycle Lift Table Replacement Pump

    Great Product

    It had no instructions but I figured it out and it works great!
  • J 11.9.2023
    Jim Richardson of Tallahassee, Floridasays:
    0 years 4 months ago
    4.7
    1 reviews
    Redline HD1K 1000 lb Motorcycle ATV Lift Table

    Best all-around

    While my workshop was being built, I had time to look at a LOT of lifts before getting this. I could have spent a lot more for a better one (like the grey Made In the U.S.A. one), or a lot less for a janky-but-does-the-job one...Read more
    While my workshop was being built, I had time to look at a LOT of lifts before getting this. I could have spent a lot more for a better one (like the grey Made In the U.S.A. one), or a lot less for a janky-but-does-the-job one (you know, the red one with the foot pedal from That Chain Store). This hit the Goldilocks spot of price/performance, especially when everybody else tacks on a couple hundred for shipping only after you've looked at your cart.

    I'll start with the dislikes, because you have to have some. First, the powder coat comes off immediately where the rollers run along the rails. Kind of expected I guess because that's a heavy wear area and aside from rust prevention before delivery, powder coating it seems pointless. I'll just strip it all off where the rollers make contact and give 'em a light coat of WD to keep them from rusting, but cleaning up red flakes after the first few uses was sub-optimal.

    Second, the roller-style dropout panel seems gimmicky to me. Unless you have a bike that is exactly the right length so that the rear tire sits on the rollers when the front's in the vise, or you want to park it on the sidestand while rolling your tire (sketchy), it's pointless, and it's a pretty big hole to push your bike through when loading and unloading. I know... some people love 'em; different strokes.

    I had a local metal shop cut and bend a new panel from 1/8" sheet and bought some square tube to cut and weld in for support. $40 for materials and a can of red spray paint and I have a solid panel that fits even better than the original (which was fine, to be fair).

    That's about it. Otherwise, after decades of crawling around on the ground when working on bikes, using it has been and exercise in "where have you been all my life!"

    It's sturdy, especially with the stabilizer bar, and the finish seems durable so far after a couple of tool drops and oil dribbles. It raises quickly and easily with my 26 gal. compressor. I'm a hobbyist who works on my own bikes and sometimes does work for friends, and I expect this will give me years of use with little trouble.

    My only regret is that I didn't get the side extensions which, since I've used the lift a few times, I now realize would come in really handy even if they're not a necessity.

    I'll also say that Redline's customer service was excellent. I had questions about both the product and the shipping process that were answered promptly by actual humans. Plus, they have some really informative YouTube videos that helped me make my decision.Read less
  • t 09.15.2023
    tony of Altamonte Spring, Floridasays:
    0 years 6 months ago
    4.7
    1 reviews
    Redline 30 Ton Air Hydraulic Shop Press

    30 ton shop press

    great quality , work great, quick arrive thanks redline
  • S 05.26.2022
    Scott B. of Levelland, Texassays:
    1 years 10 months ago
    4.7
    4 reviews
    Redline REPP70 Clamshell Pressure Pot Abrasive Blast Cabinet

    Was not expecting this

    I landed a production run contract, my current system was not capable of keeping up so I started looking for better solutions. There are many production level units on the markets and they are quite expensive, because I’m a...Read more
    I landed a production run contract, my current system was not capable of keeping up so I started looking for better solutions. There are many production level units on the markets and they are quite expensive, because I’m a smaller guy I thought it would be better to looks at “a step down” .. I bought this unit, set it up had one issue that customer service was very helpful with ( I didn’t attach the nozzle properly) then started working with it. I can’t not see how the higher price units could be anymore effective. The build quality it took notch and the hardware/components are same. This is a very well built and operating unit, I’m blasting flanges, on the old unit one flange took 18-20min, I was doing them in 7-8min last night. I’m very excited my production time has greatly increased ergo my profits. This isn’t a cheap purchase but what you get for the price is amazing. This unit and this company score a 10 from me. Read less
  • C 09.27.2021
    CJs of Vail, Arizonasays:
    2 years 6 months ago
    4.7
    2 reviews
    Redline RE26KD Benchtop Abrasive Sand Blaster Cabinet

    Works pretty okay

    Setting up the cabinet is fairly easy; anyone who has ordered furniture, etc should have no problem with assembly. Seems to be working pretty well. Be sure to have the seal covering the corners well. Also, I picked up some medium...Read more
    Setting up the cabinet is fairly easy; anyone who has ordered furniture, etc should have no problem with assembly. Seems to be working pretty well. Be sure to have the seal covering the corners well. Also, I picked up some medium media; I will be picking up some heavier stuff to remove heavy rust and weld burns. For the money, I’m pretty okay with it. Read less
  • J 07.31.2021
    Jason N. of Palmdale, Californiasays:
    2 years 7 months ago
    4.7
    1 reviews
    [DISCONTINUED] Redline RL125 Motorcycle ATV Lift Jack

    Good Lift

    Nice lift, works pretty good with my 675 lbs Harley softail. although it barley fits under the bike, have to do alot of wriggling to get it under and back out again. Overall great value, does what it says, and is very well made....Read more
    Nice lift, works pretty good with my 675 lbs Harley softail. although it barley fits under the bike, have to do alot of wriggling to get it under and back out again. Overall great value, does what it says, and is very well made. Will be buying more from Redline soon. Harley JasonRead less
  • J 09.21.2020
    JARED J. of Richfield, Utahsays:
    3 years 6 months ago
    4.7
    4 reviews
    Redline REPP70 Clamshell Pressure Pot Abrasive Blast Cabinet

    I Love It!!

    There were a few things I was looking for in a sand blaster and this had it all. I wanted a pressure pot for the extra power and ability to run stainless Steel abrasives that don't wear out as fast. I wanted Great lighting and...Read more
    There were a few things I was looking for in a sand blaster and this had it all. I wanted a pressure pot for the extra power and ability to run stainless Steel abrasives that don't wear out as fast. I wanted Great lighting and this had it. I also wanted a good vacuum system. The REPP70 had it all and at a very good price compared to the competition. I am VERY happy!!Read less
  • N 12.3.2019
    NED M. of Wittmann, Arizonasays:
    4 years 3 months ago
    4.7
    1 reviews
    LD1K & 1000L Motorcycle Lift Table Replacement Hydraulic Pump

    Great upgrade!

    I purchased this along with the LD1K/1000L Base to upgrade my harbor freight lift. After the necessary modifications this thing performs great.
  • R 06.15.2018
    Robert Peto of Howell, Michigansays:
    5 years 9 months ago
    4.7
    1 reviews
    Redline RE70 Clamshell Abrasive Sand Blast Cabinet + Media

    Good product

    I just took delivery today and like it very much so far, hopefully my opinion doesn’t change with time.

    I was reluctant to purchase the RE-70, partially because some of the other cabinets I looked at offered a satisfaction...Read more
    I just took delivery today and like it very much so far, hopefully my opinion doesn’t change with time.

    I was reluctant to purchase the RE-70, partially because some of the other cabinets I looked at offered a satisfaction guarantee that would pickup shipping costs if I choose to send it back. The other cabinets I looked at were also fully assembled. I chose the RE-70 because of the size as well as the clam shell design for ease of loading and the price. Compatible cabinets were $300 to $800 more.

    The cabinet was very well packed upon delivery and in pristine condition. No scratches or dents. It was easy to assemble and has quality hardware, no cheap nuts or bolts.

    My compressor is a single stage 6hp, 60 gallon Puma listing an ouput of 17.5 cfm @ 90 psi. Using the cabinet at 70psi, the compressor struggles to keep up, but it’s still effective. Tons of room inside and it’s well lit. Great visibility while working.

    I would like to have longer gloves to reach in deeper when needed. I reenforced the bottom of the legs and added casters to enable movement around my shop when needed. It would be nice if wheels were a purchase option. I plan to add a blowgun inside, which would also be a nice feature. Looking at the lights, which are fluorescent instead of LED, it would be nice to have easier access them for service.

    I am pleased so far and would recommend this Sandblasting cabinet to a friend.Read less
  • E 04.6.2017
    Eric H. of Madison, Wisconsinsays:
    6 years 11 months ago
    4.7
    3 reviews
    Redline SD1K ATV Motorcycle Engine Cradle Dolly

    Works Awesome!

    Drain plugs are wide open, rock solid stability. I cut some rings off chunk of pipe to lock the casters in place as a brake for the times you need it to stay put.
  • B 03.29.2017
    Bret S. of Rockwall, Texassays:
    6 years 11 months ago
    4.7
    3 reviews
    Redline SD1K ATV Motorcycle Engine Cradle Dolly

    An absolute must have

    This dolly/stand is top quality and VERY convenient. The price tag is on point and the design is very well fabricated. Highly recommend this piece of equipment for in the garage
  • T 02.22.2017
    Terry H. of Birmingham, Iowasays:
    7 years 1 months ago
    4.7
    2 reviews
    Redline 2200HD UTV/ATV Lift Table

    This is the best lift ever

    I have been working on golf carts,lawn mowers, tillers, four wheelers. this lift is great. Very heavy built. The guys at red line are great to deal with, lift came and was easy to put together. Sure glad I got the electric power...Read more
    I have been working on golf carts,lawn mowers, tillers, four wheelers. this lift is great. Very heavy built. The guys at red line are great to deal with, lift came and was easy to put together. Sure glad I got the electric power unit it is so smooth and quiet. I would say the 2200 is the best one that money can buy. Thanks red line for a great product I love it.Read less
  • D 11.28.2016
    David R. of Pascagoula, Mississippisays:
    7 years 3 months ago
    4.7
    1 reviews
    Redline Sand Blast Cabinet Dust Collector & Vacuum

    Seems OK but understand what you're getting before buying

    I recently purchased this unit for a Redline cabinet I bought last year.

    It seems to be a good unit and is physically identical to at least two other units being sold by other vendors.

    However, any potential buyer should...Read more
    I recently purchased this unit for a Redline cabinet I bought last year.

    It seems to be a good unit and is physically identical to at least two other units being sold by other vendors.

    However, any potential buyer should understand that this is primarily a replacement unit for specific Redline cabinet models that already have a dust collector.

    It is made to plug into the switch panel of one of those specific Redline cabinet models. What this means is that it comes with a special hooded male electrical connector that requires a special type of outlet. It will NOT plug into a standard electrical outlet and it does NOT have an ON/OFF switch.

    It also comes with no mounting hardware, no connector hose, and no hose clamps.

    What you see in the picture is what you get. Period.

    I didn't expect to have such additional requirements for fitting and cost but shame on me for assuming it was something that it's not.Read less
  • D 09.9.2016
    Dante M. of Sewickley, Pennsylvaniasays:
    7 years 6 months ago
    4.7
    1 reviews
    Redline 3 Gallon Heated Air Powered Parts Washer

    Where have you been???

    Really a great piece. It is so much cleaner to use and easier on hands. We all know using handcleaner will clean the skin, but if your hands have been submerged in parts cleaner, all around your nails are now black too. Not anymore!...Read more
    Really a great piece. It is so much cleaner to use and easier on hands. We all know using handcleaner will clean the skin, but if your hands have been submerged in parts cleaner, all around your nails are now black too. Not anymore! Also brilliant with air. Cleaned a piece pre-sandblast, and this began the process!!!Great to blow dry parts too instead of dripping across shop as usual.Read less
  • B 08.20.2016
    Blake W. of Indianapolis, Indianasays:
    7 years 7 months ago
    4.7
    4 reviews
    Redline REPP70 Clamshell Pressure Pot Abrasive Blast Cabinet

    Just awesome

    Bought this blaster because my work lold has went crazy!!! Well I needed something bigger and way faster then suction. Well I looked around for couple weeks. I contacted these guys 2x before finnaly throwing my money at them....Read more
    Bought this blaster because my work lold has went crazy!!! Well I needed something bigger and way faster then suction. Well I looked around for couple weeks. I contacted these guys 2x before finnaly throwing my money at them. So glad I did. One of the Alex was to short but they overnighted correct size and I was up and running next day. I havnt stopped since been 3 days and I really enjoy blasting now. So fast!!! Great machine. Check out the video they uploaded of my blasting a ar15 lower!!! So fast I can't say it enough!!! Thanks redline Read less
  • D 08.6.2016
    Dante M. of Sewickley, Pennsylvaniasays:
    7 years 7 months ago
    4.7
    4 reviews
    Redline REPP70 Clamshell Pressure Pot Abrasive Blast Cabinet

    A-MA-ZING!!!!

    3 words. Absolutely awesome. Annihilate's rust and anything. I was so excited to get it built. Then actually disappointed.... It worked so fast! I was done with my piece in under a minute. Seriously! I had to find other things...Read more
    3 words. Absolutely awesome. Annihilate's rust and anything. I was so excited to get it built. Then actually disappointed.... It worked so fast! I was done with my piece in under a minute. Seriously! I had to find other things to blast!!!Read less
  • D 06.18.2016
    Dorothy C. of Navarre, Floridasays:
    7 years 9 months ago
    4.7
    1 reviews
    Redline Engineering RE40 Abrasive Sand Blaster Cabinet

    Great all-around cabinet

    All the features exceeded my expectations. The vacuum system keeps the work area clear so you can see what you're doing. Having the ability to switch between the pistol and hands-free drop down nozzle is a great option. The...Read more
    All the features exceeded my expectations. The vacuum system keeps the work area clear so you can see what you're doing. Having the ability to switch between the pistol and hands-free drop down nozzle is a great option. The lamps light up the cabinet very well and again, each feature compliments the other.

    Overall, this cabinet is underpriced for what you get in quality and performance.Read less

Read reviews from other cities in Florida:

All Redline Stands products are made with superb materials to ensure that customers, like you, in Yakima, Washington receive a product that can withstand sustained use for many years. Discover what other Redline Stands customers in Yakima, Washington have to say about our top draw equipment.

Reviews in Florida:

Read reviews from other cities in Iowa:

All Redline Stands products are made with superb materials to ensure that customers, like you, in Yakima, Washington receive a product that can withstand sustained use for many years. Discover what other Redline Stands customers in Yakima, Washington have to say about our top draw equipment.

Reviews in Iowa:

Read reviews from other cities in North Carolina:

All Redline Stands products are made with superb materials to ensure that customers, like you, in Yakima, Washington receive a product that can withstand sustained use for many years. Discover what other Redline Stands customers in Yakima, Washington have to say about our top draw equipment.

Reviews in North Carolina:

Read reviews from other cities in Washington:

All Redline Stands products are made with superb materials to ensure that customers, like you, in Yakima, Washington receive a product that can withstand sustained use for many years. Discover what other Redline Stands customers in Yakima, Washington have to say about our top draw equipment.

Reviews in Washington:

Read reviews from other cities in Tennessee:

All Redline Stands products are made with superb materials to ensure that customers, like you, in Yakima, Washington receive a product that can withstand sustained use for many years. Discover what other Redline Stands customers in Yakima, Washington have to say about our top draw equipment.

Reviews in Tennessee:

Read reviews from other cities in Michigan:

All Redline Stands products are made with superb materials to ensure that customers, like you, in Yakima, Washington receive a product that can withstand sustained use for many years. Discover what other Redline Stands customers in Yakima, Washington have to say about our top draw equipment.

Reviews in Michigan:

Read reviews from other cities in Indiana:

All Redline Stands products are made with superb materials to ensure that customers, like you, in Yakima, Washington receive a product that can withstand sustained use for many years. Discover what other Redline Stands customers in Yakima, Washington have to say about our top draw equipment.

Reviews in Indiana:

Read reviews from other cities in Texas:

All Redline Stands products are made with superb materials to ensure that customers, like you, in Yakima, Washington receive a product that can withstand sustained use for many years. Discover what other Redline Stands customers in Yakima, Washington have to say about our top draw equipment.

Reviews in Texas:

Read reviews from other cities in Massachusetts:

All Redline Stands products are made with superb materials to ensure that customers, like you, in Yakima, Washington receive a product that can withstand sustained use for many years. Discover what other Redline Stands customers in Yakima, Washington have to say about our top draw equipment.

Reviews in Massachusetts:

Read reviews from other cities in Wisconsin:

All Redline Stands products are made with superb materials to ensure that customers, like you, in Yakima, Washington receive a product that can withstand sustained use for many years. Discover what other Redline Stands customers in Yakima, Washington have to say about our top draw equipment.

Reviews in Wisconsin:

Read reviews from other cities in West Virginia:

All Redline Stands products are made with superb materials to ensure that customers, like you, in Yakima, Washington receive a product that can withstand sustained use for many years. Discover what other Redline Stands customers in Yakima, Washington have to say about our top draw equipment.

Reviews in West Virginia:

Read reviews from other cities in Oklahoma:

All Redline Stands products are made with superb materials to ensure that customers, like you, in Yakima, Washington receive a product that can withstand sustained use for many years. Discover what other Redline Stands customers in Yakima, Washington have to say about our top draw equipment.

Reviews in Oklahoma:

Read reviews from other cities in California:

All Redline Stands products are made with superb materials to ensure that customers, like you, in Yakima, Washington receive a product that can withstand sustained use for many years. Discover what other Redline Stands customers in Yakima, Washington have to say about our top draw equipment.

Reviews in California:

Read reviews from other cities in Mississippi:

All Redline Stands products are made with superb materials to ensure that customers, like you, in Yakima, Washington receive a product that can withstand sustained use for many years. Discover what other Redline Stands customers in Yakima, Washington have to say about our top draw equipment.

Reviews in Mississippi:

Read reviews from other cities in Saskatchewan:

All Redline Stands products are made with superb materials to ensure that customers, like you, in Yakima, Washington receive a product that can withstand sustained use for many years. Discover what other Redline Stands customers in Yakima, Washington have to say about our top draw equipment.

Reviews in Saskatchewan:

Read reviews from other cities in Utah:

All Redline Stands products are made with superb materials to ensure that customers, like you, in Yakima, Washington receive a product that can withstand sustained use for many years. Discover what other Redline Stands customers in Yakima, Washington have to say about our top draw equipment.

Reviews in Utah:

Read reviews from other cities in Pennsylvania:

All Redline Stands products are made with superb materials to ensure that customers, like you, in Yakima, Washington receive a product that can withstand sustained use for many years. Discover what other Redline Stands customers in Yakima, Washington have to say about our top draw equipment.

Reviews in Pennsylvania:

Read reviews from other cities in Arizona:

All Redline Stands products are made with superb materials to ensure that customers, like you, in Yakima, Washington receive a product that can withstand sustained use for many years. Discover what other Redline Stands customers in Yakima, Washington have to say about our top draw equipment.

Reviews in Arizona:

Read reviews from other cities in Ohio:

All Redline Stands products are made with superb materials to ensure that customers, like you, in Yakima, Washington receive a product that can withstand sustained use for many years. Discover what other Redline Stands customers in Yakima, Washington have to say about our top draw equipment.

Reviews in Ohio:

Free shipping only applies to products that are marked "free shipping" or "ships free" in the title. Freight ship items have a predetermined max amount that can be spent under our free shipping policy. In the event you reside in an unusually high cost shipping zip code we may alert you that a shipping surcharge may be necessary.

Click OK to view our full shipping policy. Clicking cancel will keep you on the current page.

Search Cart Quote Facebook eBay YouTube Menu Menu