Website Feedback

Email:

Add your email address to take a quick survey and receive $10.00 off your next order!

0

Redline 20 Ton Air Hydraulic Shop Press

Model: RE20T-A

(2 reviews)

Optional Accessories


Redline RE-AR 3/8" Air Hose Reel


Pin Press Kit


SMC 1/4" Lo-Flow Water Separator


Extra Pair Of Press Plates


Shop Press Foot Pedal
Brand
Type

Shipping upgrades offered in cart page

$799.50

Description

This industrial Redline 20 ton hydraulic shop press is an air over hydraulic pressing machine perfect for manufacturing, auto repair, or general mechanical work.  It features a pump capable of manual operation, as well as it can be powered via compressed air. Standard features include a tonnage gauge, capability to move the ram cylinder from left to right, and 9 different height adjustments for both small and large projects. Order your new 40,000 pound capacity hydraulic shop press today from Redline Engineering!

KEY BENEFITS
• CE Certified
• 20 ton capacity
• Powder coated finish
• 42-3/4" movement of carriage up and down
• 9 height adjustments of 4-3/4" increments
• Ram cylinder capable of shifting both left and right
• Pressure gauge accurate +/- 2.5% of press capacity
• Air powered hydraulic cylinder for heavy duty pressing

This hydraulic shop press, commonly misspelled as a “hydrolic” press, is great for pressing wheel bearings where tons of force is needed.

PRESS PLATE RATING
• Each press plate is rated to ½ the tonnage of the press; thus, if applying the press’ maximum force, the load must be distributed over both press plates to avoid damaging the press

Show more

Specs

• Hose length 50"
• Leg length 27-1/2"
• Cylinder stroke 7.2"
• Handle length 27-1/8"
• Carriage pin diameter: 1"
• Inside frame width: 21-3/8"
• Cylinder ram diameter 1-7/8"
• Main frame is 1-13/16" x 3-7/8"
• Interior carriage width: 4-3/16"
• Internal cylinder diameter: 2.36"
• Pump fluid volume: 32.1 fl oz.
• Operates at a 75dB sound rating
• Piston retraction time: 35 seconds
• Pressure gauge accurate to +/- 2.5%
• Maximum pump pressure: 10056 PSI
• Air motor requires 7 CFM of air supply
• Cylinder piston/bore diameter: 2.3622"
• Overall dims 31-3/4" L x 27-1/2" W x 70" H
• Air pump full range without load: 52 seconds
• Middle carriage 24-3/4" L x 8-1/4" W x 4-3/4" H
• Approximate number of pumps to full range without load: 173
• Two heavy duty press plates 7-7/16" L x 3-7/8" W x 1-3/16" thickness
• Work dims between cylinder and press plates:
-Min height from cylinder: 3/8"
-Max height from cylinder: 38-1/4"

Downloads

• Download the manual pdf HERE

Shipping

• Residential deliveries cost extra
• Ships to commercial location w/ forklift
• Units available in Pensacola, FL with rebate
• Pensacola, FL pickups – read our policies HERE
• Ships 211 lbs. plus pallet at 39" W x 63" L x 16" H as 2 boxes Class 85
• Free shipping applies to $200 maximum. If shipping exceeds this amount a surcharge may be needed

 

 

Videos

Reviews

5.0 / 5 (2 reviews)
Based on 2 Reviews Write review
  • Ron Aug 9, 2023

    20 ton press

    Aug 9, 2023
    I was looking for a 20 ton press and came across redline stands presses. I looked at presses on ebay and amazon which looked about the same build quality but had no customer service. So I purchased a 20 ton from redline stands. The shipping and packaging was on point. When it arrived I had one question about assembly so I called customer service and got a quick and polite answer to my question. After finishing the assembly the sleeve on the bottom of the ram was threaded crooked and was not flush when I tightened it up. I call again and a video, two day after a package arrived with a new ram and the collar piece. I switched out the collar piece and it was perfect. I called and told customer service everything was fine and I would send back the ram and collar. The same day I was emailed a return label. The customer service and technical assistance was outstanding!! If your looking for a press look no further redline stands it the place. A very good press but the customer and technical support was priceless. Thank you redline stands
  • Steve Jan 31, 2021

    Love this press. It's what I expected and more.

    Jan 31, 2021
    I can't find anything bad to say about this press other than some poor grammar in the instruction documentation (not that I write any better). I paid a bit more for this model so that I'd get the sliding head, 1" cartridge pin holder, pressure gauge, and air motor actuator. I've modified the base by replacing the floor rails with a rectangular tubing frame with wheels so I that can move this around in my shop. I've also adapted a heavy duty 20 ton finger brake to this press. Customer support was responsive, friendly, and helpful with an assembly question I had.

Ask & Answer

  • Landon Sep 22, 2023
    Q. What is the material of the press pins.
    A. We asked the factory and were told it's not heat treated and should be considered normal carbon steel.
  • Landon Sep 22, 2023
    Q. Can you apply different press dies to the cylinder?
    Example of a press die: https://coaliron.com/collections/dies/products/combo-dies

    and

    https://coaliron.com/collections/dies/products/squaring--
    dies

    and

    https://coaliron.com/collections/dies/products/drawing-d-
    ies
    A. I'm afraid we have no experience with die making or die pressing. We do not know sir. My apologies.
  • Landon Sep 21, 2023
    Q. Can you apply different press dies to the cylinder?
    A. I'm sorry but we do not fully understand your question. If you're talking about the different pins that can be changed out, that is done via a set screw in the ram. Thanks Landon.
  • Viciousknid Dec 08, 2022
    Q. Can I set adjust load pressure so it stops consistantly at a specified tonnage?
    A. There would be nothing to stop you from adjusting the relief pressure of the pump so that it gets to a certain point and maxes-out at the tonnage you require. With that said, you'd then have to adjust the pump yet again if you wished to create more tonnage. I hope this helps. Thanks for shopping with us!
  • Pete Feb 08, 2022
    Q. Can I purchase the pin press kit separately?
    A. Sure! HERE it is. Be sure you don’t need an “ECO” PIN KIT Thanks Pete!

ASK A “PUBLICLY POSTED” QUESTION

You need to be logged to vote.



  1. Home
  2. Shop Equipment
  3. Hydraulic Shop Press
  4. All Shop Presses
  5. Redline 20 Ton Air Hydraulic Shop Press

Free shipping only applies to products that are marked "free shipping" or "ships free" in the title. Freight ship items have a predetermined max amount that can be spent under our free shipping policy. In the event you reside in an unusually high cost shipping zip code we may alert you that a shipping surcharge may be necessary.

Click OK to view our full shipping policy. Clicking cancel will keep you on the current page.

Search Cart Quote Facebook eBay YouTube Menu Menu