All Product Reviews

Bought a used lift at a decent price. Used it once and got stranded. Bleeding didn’t work. I assume it’s in the valves. Bought this on a Monday night(12/21/20) of Christmas week 2020. Shipping email said delivered Wednesday I was thinking “BS”, but it came in today 12/23/20. Had it all installed in about 30 mins. Two hints: 1- fill it with oil before installing, the plug is in the same silly place as the HF ones. 2-after removing the set screws and grease fittings, the dowel rods can be pulled out by threading in a 3/8 bolt or by tipping it up on the sides. Watch that loose release rod....they bend easy. Ask me how I know. Aight! Back to working on my bike. Peace!

I own a mobile blasting service and find myself needing to clean smaller parts before blasting sometimes. I used to put this onus on the customer but they never cleaned them properly. Now, I will charge for this service. Just ran some nasty dirt bike parts and this unit did just great. I chose to add a flow through brush that you can pick up on Amazon or anywhere else for that matter. Keeps the detergent flowing while you scrub. It is quiet when operating and looks great sitting next to my monster REPP70 blast cabinet from Redline!
Great addition to my shop and my capabilities.

I own a mobile blasting service and customers often ask me to handle small parts like intakes or brake calipers. I recently opened up a garage to work from and decided on a blast cabinet. I researched extensively and kept coming back to the Redline unit. Dollar cost with delivery and performance offered was just a no-brainer. Delivery went off without a hitch. Assembly is pretty involved and was challenging because the manual with my unit did not match the unit I received. However, the guys at Redline were very helpful and got me up and running. This unit is good looking and imposing. Makes a great impression. The vacuum is outstanding and keeps the view in the cabinet clear.

So we're really happy with the machine with one exception. The manual is awful. Be ready to figure it out for yourself. The pictures come in more handy for assembly than the manual; but once you're done, she's a solid piece of machinery.

I was awful curious what the quality was going to be like and I'm glad to say I'm really pleased. It's not quite as good as my Snap-On, but it's also a lot better than what you come to find at Harbor Freight and Home Depot. I really liked that it had nitrogen storage space and a clamshell top. The powder coating is a 9 out of 10, and all the drawers are roller bearing slides. I'd prefer a better looking wheel, but given what I paid I can't complain. Good job Redline.

This new pitcart is exactly what I was looking for. Never purchasing anything from this company before and never seeing the pitcart in person, I was nervous ordering this type of equipment. After a seamless transaction and excellent customer service, I was thrilled with the quality of the cart. Small enough for one person to maneuver around in and out of a trailer and big enough to store all of the essentials. Priced right!

I received my rotisserie by a common carrier, the crate that it came in was very weak and had fallen apart during shipping, its basically 1/4 plywood, very thin for such a heavy load, most of the powder coating was scrapped off.
It took me about two hours to assemble the whole unit, I must say I was impressed more and more as it came together, very well made good welding, perfect fitting all the threaded parts had been re-tapped after powder coating for an easy fit, all the hardware exact count, all things considered a great product and value.

This added by Redline:
Good morning Shuan, and sorry for the crating issue. Those crates normally arrive in great shape, but every once in a while you'll see the truck carrier hire a forklift driver on a warpath. As I always say, "The toughest packaging in the world is no match for an idiot with a forklift." Glad to hear you were happy with the product and thanks for shopping with us!

This is my second Handy lift, my first lift I bought 17 years ago and it still works like it did when it was new, super great tool. My second Handy lift is the 1500 Bob with the trike kite and it’s a awesome lift. Both my handy lifts were easy to assemble. I rate the Handy motorcycle lifts #1 and the Handy lifts are far above the Chinese junk that’s on the market these days.

What a great product! After working on my back for a couple years on and off my restoration felt like it was never going to end. I thought a rotisserie would help. Boy is that an understatement. I can now put my 1965 GMC G1000 Van in any position I want with little effort. Assembling the unit was a piece of cake. I had to fabricate the brackets to attach it to the body. However I could have purchased the unibody brackets here and saved that step. Oh well live and learn. The unit is well built and the casters roll with ease. The anti tip extensions that came included make me feel comfortable when it's in motion. Shipping was fast but that brings me to my only complaint. I paid extra to get it shipped to my home but they would only drop it at the street in front of my driveway. (Long and up hill) I would highly recommend the ROT3000-LD to anyone. Thank you all.

There were a few things I was looking for in a sand blaster and this had it all. I wanted a pressure pot for the extra power and ability to run stainless Steel abrasives that don't wear out as fast. I wanted Great lighting and this had it. I also wanted a good vacuum system. The REPP70 had it all and at a very good price compared to the competition. I am VERY happy!!

I received my re22 today I will say it was well packed everything was there and it literally assembled in minutes thanks to the color coded hoses

It is excellent for doing small parts like the miniature detail Parts did I make for the model train industry. However a drawback that I see is due to the angle of the novel and the direction that it points it truly does bounce the media up at the lens protector and within 30 minutes of using it today my lens protector was badly fogged

A little redesign of the machine would eliminate this problem but the foot pedal makes it very easy to use does a great job with the small stuff I work with

With a little redesign of the nozzle I think it could be and even better machine

All in all I'm happy with it even though it was made in China

Just finished setting it up in garage and already have my BMW RT sitting on it. Great experience with Redline. They answered all my questions and their warehouse crew was fantastic and loaded me up within Five minutes of arrival. Thank you.

The best way to work comfortable and easily. I recommend this rotisserie

Redline is a great company to work with, from the phone consultation, order, spare consumables to timely delivery. Assembly was easy and all parts present. After using it for a few weeks I look for stuff to blast. Would and have recommended to anyone looking for a great sand blaster!

This unit is badass, we run a drivetrain and manual transmission rebuilding service @ rvenge performance and a air over hydraulic press was just slowing us down too much. This thing is 8 times faster than our air/hydro 40 ton unit we had before and it really speeds up work.

Sets up easily, few parts to really install. You may want a friend when putting it upright, we just used an engine hoist and heavy strap to pick it up by the upper header and it was really easy. Just be careful, its about 900 lbs. To put the power unit on we just used a jack to get it close and it was also really easy. Our unit only took about 5 gallons of aw32 just FYI, you may only need one bucket.

Very well built, quiet (no more need for ear muffs like the air one needed), fast, and doesn't deflect at all. Redline also ships very fast. We ordered on a Monday and had it here and setup on a Friday.

Presses with all the features this one has were double the cost.

Thanks Redline!

The modification was not that difficult. You have to move the cup that the pump ram sits in on the "V" plate back about an inch and a half or more. Move the tabs on the foot controls to match the pumps manual controls, and get a 25MM rotatory shaft to make two pins that 150MM each in length to mount in the table.

The 2200HD is one of the greatest electric lifts I have seen. The support I received from Redline Stands was great from the time I ordered the lift through the time I received and set the lift up.
Special thanks to Nathan and Dustin. Even though I found no problems with the lift, to improve the lift, I recommend (1) the Dip Stick be changed from White to some other color that would be easier to read the fluid level since the fluid is clear and (2) make it a little harder to slide the Left Ramp off by inserting a clip or something on the ramp to prevent unwanted movement but still easy to remove the ramp when needed. That being said, I would still buy this lift and recommend it to all.

This hard to find item is great for my small project applications. This will work perfectly over my tear down table. I'll hang this on a wall but with a little ingenuity, the removable legs still create a perfect stable shelf for cleaning accessories like brushes. Hint: I'm going to use magnets to attach the shelf so it's 100% removable. Great looking product that is built solid. This also has a drain plug on the bottom for those wondering. Was extremely happy to see that drain plug already factory installed! Redline has extremely great support as well. Thank you Jason for the help with the light issue I had! Outstanding support, especially in this hard time we are all dealing with. Will support and buy from Redline again! God Bless!

Installation required me to auger out the mount holes (too close together) so the bolts would go in place without damaging the bumper mount holes. Since we all know how precise the old Mopars were made, using at least one slot instead of a hole where they mount to the frame would make them so they would bolt in place without modification and a 5 star product.

Concept was good but they did not fit correctly. I had to fix three things to make them work. First I had to bend the B Body mount tangs to fit over the rear shackle mount. Not a big deal. Next the B Body mount bolt hole was oversized for the shackle bolt (18mm vs. 9/16) so I couldn’t use a bolt similar sized to a shackle. I had to drill out for a larger bolt (3/4) and could not use the bushings to protect the inside of the shackle mount. Lastly, the slot for the rear of the bracket where it mounts to the cross rail was not the correct distance from the shackle mount; I had to auger out the slots on the B Body Mount to make them fit. These slots should be cut longitudinally, not laterally, for a correct fit. None of these issues were show stoppers but with a couple of minor design tweaks they would be perfect 5 star and bolt right in place.

The Redline sales people that I talked to were very helpful and professional during our conversations. The stand arrived quickly and without major damage to the crate. Assembly instructions were a little weak and required a couple of trips to the hardware store to get the right hardware but it went together easily. The holes on the T-arm for the Adjust Rod Screw were oversize so I bought some bronze bushings for a better fit and security. The upper bolts for the hydraulic ram were too short so I had to buy some longer 16mm bolts to ensure proper security. Many of the bolt holes on the wheel mounts were too close to the casters so that you can’t use sockets during the assembly process. Also, the hydraulic rams do not come serviced so buy some jack oil. Lastly the longest extension rods were blemished or bent so that they did not slide through the other rods without getting stuck. All this being said, after the assembly was completed I was able to lift and balance the car without major issues. It seems to be very solid and the extension feet really give me an extra sense of security.

Good and solid! Everything is accessible and you can move it anywhere, which comes in handy for me. The fact that it has an adjustable width and height is awesome as well.
I added 4 anchor shackles with screw pins, to hook the tie down straps to, as the holes, in the dolly, were a little too small to hook the strap hooks into.

I ordered the 1,000 pound Mini Lift and top plate because my motorcycle sits very low to the ground. I was so happy when the soft lift mounts lined up with four parts of my custom frame. No other lift has ever been able to line up correctly.
Also, I left a note for them to please rush the shipment because the bike was going into a show soon. I ordered it in the evening and it was on a FedEx truck the following morning. Wow, awesome service and a terrific product!!

Thank you to Redline for offering this replacement pump jack for the Harbor Freight Motorcycle Lift Table. After watching many YouTube videos about how to fix the original pump, including buying the chemicals, trying to bleed the jack, and completely disassembling the original with no success, it was my intention to buy a large ton jack and rebuild the mounting yoke and linkage to refit the lift. One last web search led me to Redline Engineering and I am so pleased with the result. Ten minutes after the box arrived the replacement jack was installed and the lift worked perfectly! Many thanks to Redline for offering this fix. Well worth the cash.

Just picked up my MC1K for my garage It was packaged heavy duty. No issues with the shipping. .Assembled in less than 1 hour with 2 people. Very sturdy. No issues lifting my 81 Suzuki GS 1100. Glad I got the side extenders. What really sold me on it was their video and Schnitz Racing recommending it.

This piece works great makes the jack lift perfect again. Only thing you need to have extra to replace your original Jack is about 12 in of 1 in bar stock because it does not come with those two large pins that sit inside the side rails of the frame of the lift and the ones on the original are not removable they are part of the frame of the original jack. Other than that was a direct install and works great.

very good i like you telling like it is i have blasted with everything you can thank of play sand cheep garnet media seems best to me i use a fish cooker with pot to get moisture out of my cheap sand

I purchased this along with the LD1K/1000L Base to upgrade my harbor freight lift. After the necessary modifications this thing performs great.

I couldn't be happier with the TC500M tire changer I ordered. Delivery was fast with no shipping damage due to a strong shipping crate and the tire changer was surprisingly well built. It included (4) sets of plastic pads for the mounting head, a set of pads for the clamp jaws as well as one on the bead breaker. Even the included tools were better quality than I was expecting. I have used it several times now and it is rigid enough that even 45 series tires don't pull the mounting head into the rim. Great service, fast shipping and much better quality than anticipated.

A really solid unit

I've had this lift for almost a year now and couldn't be happier. Wish I bought it many years ago, it makes things so much easier in my shop, You can't beat this lift for the price especially with the free shipping.

This is a great solution for small soda blasting jobs. I blasted some aluminum golf cart engine parts and they looked like new when I was finished. I used the sodium bicarbonate blast media from HF. The gun took the carbon off of the top of the piston with ease. I can highly recommend this product.

I purchased the LD1K lift after my 14-year old Lift Buddy motorcycle lift failed. It had been a great lift for my 2003 Yamaha Star, but when the hydraulic cylinder failed to extend I could not find anyone interested in repairing, and Lift Buddy no longer made motorcycle lifts. So, had the old Lift Buddy removed and replaced it with the nearly identically sized Redline Engineering LD1K. Plus, this was an upgrade, because the LD1K offered the option of using air pressure to raise the lift instead of manually pumping. My DeWalt 4.5-gallon home air compressor was able to accomplish that task, although manually pumping up the lift was also not a problem for my 630-pound motorcycle.

The LD1K's tire vice was not quite as huge as the tire vice my Lift Buddy had, so agree with Redline's instructions to also use straps. After some experimentation found that strapping via the highway pegs on the engine guards gave rock solid mounting, so it's not a big deal to use straps along with the tire vice.

Also appreciate the quick assistance Redline Engineering provided in issues for motor freight delivery to my location; that ended up making the residential, "inside" delivery work out.

The LD1K came well packaged in a wooden crate, so also will provide additional firewood after removing the nails and cutting up.

Ordered an ROT3000 rotisserie from Redline, and it arrived in 2 days. Assembly was easy and I have already saved hours on the project and wear on my knees!

I have owned this table for almost 5 years now and use it 7 days a week running my small business. I have cycled the table up and down 1000s of times I would have to estimate. So far my only complaint is the foot pedal control is very oily. I put a piece of cut to size plywood under it to help keep it contained. It doesn't leak bad, it just has a fine mist that any dirt or dust will stick to the foot control. Keep the hydraulic oil clean and the pump lubed with air motor oil and it will hold up just fine for commercial use!

Purchased this cabinet and everything went smooth from the time I ordered to the time it was delivered.
I bought not 1 but 2 blast cabinets from a local chain store. Let's say the store name sounds like Garbage Crate. I replaced just about every part on them and every hack I could find on the net. It never worked like it should.
I finally convinced my self to bite the bullet and purchase a good unit. Did a lot of reading on the net and decided to go with this one. Machine was created really good for shipping. Took about an hour give or take to assemble it. Alot of work room and the thing works so good. No buyers remorse here. I made the right decision.

This is the best lift I have used for the applications I use it for ie: Commercial Mowers, UTVs, and other small engine repairs. I recommend this to anyone or any business. This lift is very safety oriented and holds up to its expecations. Customer Service when called was very knowledgeable and made the transaction flawless.
Packaging was great and was easy to assemble.

I normally don't do a lot of review but this product deserves some mention. Purchased to move my GS (550 lbs) around the garage. Well built dolly makes moving around a breeze, works as advertised. More expensive than the competitors, but built quality w/ thick steel, rubber pad, thick casters, and great brakes make this an overall great dolly. I was concerned about the stand getting thrown around either when loading or unloading the bike on/off centerstand. Weight of the unit + great brakes on the casters make that concern a non-issue.

Another note, I purchased this unit on Sunday. Monday by 9:00 am I got an email with tracking info, unit was already shipped. Received in Mid-Atlantic area within 3-4 days. Thanks Redline for a fantastic product & great support!!!

I bought this unit for the self extractor feature, Im a mobile oil business and this unit is a big help when Im out doing jobs. it helps with spills and storage of oil on multiple vehicles. the other features are a plus for vacuuming up spills quickly and dispensing used oil quickly. I Like to thank Ian Gilmore for taking the time to make a video and demonstrate to me how to use all the functions. "big ups to him" I also had a small leak in the vacuum hose, but they sent it right out to me asap.

Thanks guys good product.

This lift performs as advertised. I ordered this lift with the Trike Kit and was amazed at how easy it was to assemble and set up. Wiring is tight and neat, welds are nice and the overall product quality is outstanding. I highly recommend this lift if you're looking for a quality lift for your Motorcycle, Trike, ATV or UTV. Very versatile with the different kits available. The customer service experience was great also. Five Stars! If you watch the video, you'll know how to set it up, even with the optional kits.
Thanks!

Works great! Thanks

Recieved the lift and had her going up and down / fully assembled in under an hour. Lift arrived in plywood crate and paid for residential liftgate service. I read the other guys review about psi issues and saw a video on utube with a street glide not able to get to the highest position with a 150psi kobalt compressor. I purchased a 175psi husky 30gallon and my street glide 2008 goes up and down at least 3 times with the tank full and compressor off and regulator set at 150psi. Not sure if the guy on utube has compressor issues or what but 150 psi works for me. The only downside I have seen with this lift is the lettering on the sides of the lift are missing. Bummer because after using this lift for a week, I am loving the this thing and want to show off the brand. The sales guys have assured me they will mail some out to me, but we will see.

I bought the Launch 9K 2 post clear floor lift for my personal use at my home shop. I love this lift. It's made for long lasting durability. The fact that you can rotate the columns makes a big difference for a big guy. It is very easy to install and comes with everything needed aside from the necessary tools of course. It had no issues lifting a Dodge 4x4 quad cab 1/2 ton. I expect many years of service from this well built lift. The only CON I have to bring up is that the manual is very bland. Nowhere in the manual could I find torque specs for the anchor bolts, nor a wiring diagram for the safety switch. I was fortunate to find them on the internet. All in all I would still highly recommend this lift to anyone for their business or home use. Five stars from this guy.

The chock is good to go..bike rolls in and out no problem. Bike locks in and has the same play from side to side that you see on there YouTube video. On the other hand the finish came chipped and looked use and resold to me .the box was beat up and looked like it was thrown all the way from china...But love is only a light switch away. I would recommend this to anyone. ....2010 STREETBOB

As I have gotten older the floor of my shop is further from my belt line. This lift gets everything up where it is easy to work on my Honda trike. The lift makes it easier to change tires, change oil, and add accessories. Cleaning is also easier when the trike is on the lift, No more bending and stooping.
The quality of the lift seems fine, although the side extensions do seem to droop a little.Also make sure the suspension is all the way up so the bike clears the loading ramps. This is a good lift for the home shop and a great value.

Quick response on questions I had before purchasing this product full review once I test it out.

I just took delivery today and like it very much so far, hopefully my opinion doesn’t change with time.

I was reluctant to purchase the RE-70, partially because some of the other cabinets I looked at offered a satisfaction guarantee that would pickup shipping costs if I choose to send it back. The other cabinets I looked at were also fully assembled. I chose the RE-70 because of the size as well as the clam shell design for ease of loading and the price. Compatible cabinets were $300 to $800 more.

The cabinet was very well packed upon delivery and in pristine condition. No scratches or dents. It was easy to assemble and has quality hardware, no cheap nuts or bolts.

My compressor is a single stage 6hp, 60 gallon Puma listing an ouput of 17.5 cfm @ 90 psi. Using the cabinet at 70psi, the compressor struggles to keep up, but it’s still effective. Tons of room inside and it’s well lit. Great visibility while working.

I would like to have longer gloves to reach in deeper when needed. I reenforced the bottom of the legs and added casters to enable movement around my shop when needed. It would be nice if wheels were a purchase option. I plan to add a blowgun inside, which would also be a nice feature. Looking at the lights, which are fluorescent instead of LED, it would be nice to have easier access them for service.

I am pleased so far and would recommend this Sandblasting cabinet to a friend.

So far this trailer has everything. I must also give props to Redline, even after paying $300 for shipping this trailer was still $90 cheaper than if I had driven to the factory 30 minutes away from my home and bought the trailer from them. Plus the trailer I bought from this company comes with a spare tire , a motorcycle wheel chock and wheel chocks for the trailer wheels. It’s better but less expensive than the Kendon trailers. All I can say is make sure you do research before you buy. This trailer holds 500 pounds more than all the other single bike trailers I looked at.

I ordered this lift from Redline Engineering and received excellent customer service. It was shipped immediately and received much sooner than expected. I'm almost 62 years old and had no help to uncrate and set up the lift. It's a challenge for someone my age, but definitely doable. The only thing that caught me by surprise is that I needed to supply hydraulic fluid. Not having advance notice of that meant I had to acquire it locally. The smallest available locally was 5 gallons. Over 4 and a half gallons more than I needed. I wish I would have known earlier. Other than that, the lift went together without a hitch and operates buttery smooth. I'm glad I went with the electric. I do have an air compressor but the electric is much more convenient for my usage. The wheel vise doesn't give me great confidence, so I'm going to switch that out with another one I have on hand. All in all, I'm very pleased with this lift and believe it's a good value for the money. One last thing....the dealer says "Free Shipping* restrictions apply". I ended up having to pay $239 extra to get it out to the west coast. So....be aware of those restrictions.

I wish I would’ve bought one years ago I got it today but together tried it out it works better than I ever imagined thank you

Yes this will lift 1000 lb if you have 155psi to it. OSA will only let you have 90spi in a shop so good luck. On the plus side the customer service is top notch, I called them to tell them that I could not lift a Husqvarna M-ZT52 it's weight is 760lb. and they called me back and said to send them a video of it in operation and to note the psi that we are running to it, we are running 120psi. it only lifts it about half the way up. below is the reply I received. We have four M-1000c lifts that have no trouble lifting anything that we put on it running at 120psi or less!

"I’ve seen some of those MC1K’s need more than 120 psi before in order to lift a full 1,000 lbs. Have a look at the video below. We made that video with 155 psi. I hate to tell you that your air compressor is a bit small for the MC1K but it’s the truth. Now sure, you have an M1000C there and it makes the lift. That’s because it has a larger pneumatic cylinder in the machine and frankly, it’s a heavy duty table, whereas the MC1K is light to medium duty.



I actually have that same mower and I’m sorry to tell you it weighs a bit more than that. I weighed mine, which also has a bagger, and it was over 900 lbs. So, after you add the side extensions you’re over 1,000 lbs that the table itself is lifting. Will it still do it? Sure, but it’ll need more air pressure. Sorry to be the bearer of lousy news sir."
https://www.youtube.com/watch?v=Wtizn-DYZlY&authuser=0

I bought this press for my Dabpress Rosin plates,. it was easy to assemble. compact and it seems sturdy enough for constant 3-5 ton presses. I put wheels on mine and I am very satisfied so far. would recommend to anyone...

I bought this over a year ago. It arrived with the glass already damaged some on the outside during shipping but I needed to use it so I did not send it back. These are some things I found that need changing:

The spray nozzle faces to the front and down which is a problem the blast media bounces off your work piece against the glass and it is not long before you are working blind. Make sure you buy a lot of the screen protectors you are going to need them. The nozzle should be mounted in the front facing down and to the back of the cabinet.

The angles in the front of the cabinet narrow it up in the location you most need room since the nozzle faces the front. The box should be made square it would save manufacturing costs and the angles serve no purpose.

The angles also make it so your hands do not fit into the gloves far enough to keep them on good. The gloves kept coming off with me. I was never into the cabinet much past my wrists ever. Also if the nozzle was mounted against the front wall facing down to the back you hands would be deeper in the gloves and they would stay on your hands better. Also the blast media would bounce off your work piece into the back of the cabinet and not continually off the glass.

The quality of construction of this cabinet is very good. If these changes are made it will be the best cabinet out there in this size range. Like I said the quality of the cabinet and all hard wear is very good!

I purchased this unit 1 year ago and love all about it. Just had an issue with it and within 3 hours I had the manufacturer calling me to get it resolved. Needless to say from Dustin and Redline Lifts to the reps at Challenger, they have my business and I will be referring them to all that ask's me about a lift. Can't beat the service!

Bought it standblast guns prior to Cerakote or Duracoating. Does leak some but not bad, I used it in my kitchen and wife didn't complain much. Light is nice until screen covers with media.

Nice size for someone working on pistol/small parts occasionally. Well built it'll out last me.

Drain plugs are wide open, rock solid stability. I cut some rings off chunk of pipe to lock the casters in place as a brake for the times you need it to stay put.

This dolly/stand is top quality and VERY convenient. The price tag is on point and the design is very well fabricated. Highly recommend this piece of equipment for in the garage

I have been working on golf carts,lawn mowers, tillers, four wheelers. this lift is great. Very heavy built. The guys at red line are great to deal with, lift came and was easy to put together. Sure glad I got the electric power unit it is so smooth and quiet. I would say the 2200 is the best one that money can buy. Thanks red line for a great product I love it.

I recently purchased this unit for a Redline cabinet I bought last year.

It seems to be a good unit and is physically identical to at least two other units being sold by other vendors.

However, any potential buyer should understand that this is primarily a replacement unit for specific Redline cabinet models that already have a dust collector.

It is made to plug into the switch panel of one of those specific Redline cabinet models. What this means is that it comes with a special hooded male electrical connector that requires a special type of outlet. It will NOT plug into a standard electrical outlet and it does NOT have an ON/OFF switch.

It also comes with no mounting hardware, no connector hose, and no hose clamps.

What you see in the picture is what you get. Period.

I didn't expect to have such additional requirements for fitting and cost but shame on me for assuming it was something that it's not.

Really a great piece. It is so much cleaner to use and easier on hands. We all know using handcleaner will clean the skin, but if your hands have been submerged in parts cleaner, all around your nails are now black too. Not anymore! Also brilliant with air. Cleaned a piece pre-sandblast, and this began the process!!!Great to blow dry parts too instead of dripping across shop as usual.

Bought this blaster because my work lold has went crazy!!! Well I needed something bigger and way faster then suction. Well I looked around for couple weeks. I contacted these guys 2x before finnaly throwing my money at them. So glad I did. One of the Alex was to short but they overnighted correct size and I was up and running next day. I havnt stopped since been 3 days and I really enjoy blasting now. So fast!!! Great machine. Check out the video they uploaded of my blasting a ar15 lower!!! So fast I can't say it enough!!! Thanks redline

3 words. Absolutely awesome. Annihilate's rust and anything. I was so excited to get it built. Then actually disappointed.... It worked so fast! I was done with my piece in under a minute. Seriously! I had to find other things to blast!!!

All the features exceeded my expectations. The vacuum system keeps the work area clear so you can see what you're doing. Having the ability to switch between the pistol and hands-free drop down nozzle is a great option. The lamps light up the cabinet very well and again, each feature compliments the other.

Overall, this cabinet is underpriced for what you get in quality and performance.

“Great product, love it! Works perfectly as advertised.”

“Great product, love it! Works perfectly as advertised.”

The freight carrier scratched up the paint on my lift pretty badly. Redline sent me this touch up paint and it did a great job repairing the scratches left by the carrier.

I've had this lift for almost a year now and couldn't be happier, easy to install, (did it myself) Wish I bought it 20 years ago, it makes things so much easier in my home shop, You can't beat this lift for the price.

I bought one of these units for my own 95' XR250L and I was very impressed with it. The fabrication quality is very nice and the powder coating was flawless. While this lift is not quite as spiffy as the Rhino stand, you just can't beat it for under $60!