All Product Reviews

I purchased the RL135 kit. The jack works perfectly. It easily lifts my 2012 Ultra Limited. It did take some attempts to orientate the Ultra Limited, so the front and back wheels lifted near the same height. The assembly instructions were very basic but were sufficient. I have not used the dolly yet as it came after I had used the jack and had it put away.

Shipped fast. Easy assembly. Shipping create could be made a little stronger.

I actually ordered a mc615r, but I’m glad K&L had them back ordered. This mc500r electric lift is well worth the couple hundred extra vs the air version, both being 1000lb. This lift is quiet and super smooth. No jerking and can basically plug in anywhere. Redline answers their phones and responds to emails quickly. I will keep giving them my buisness.

You should bring this back into production. It’s exactly what I need and

I ordered this lift with pickup at the freight facility. The facility never called to say it was in so I contacted redline customer service and the problem was handled immediately. After receiving the table assembly was pretty straightforward. The lift works great and lifts my Harley Limited with no problems. This lift definitely saves my back and makes working on my bike much easier. Thanks Resline for a great product

I am very pleased with the quality & performance of this press. It worked flawlessy. Having the pedal accessory made it very easy to hold the pieces in place while using the press was just awesome.

I received the lift in good condition when expected. There were no bolts for the wheel stop. The wheels on the lift could be a better quality. I could not install the tip over bar. The tube it goes through was welded off location. I had to open up the exit hole on the right side. Overall, it is a great lift. Before I ordered it I asked if you need the ramp extensions to use it for a Harley tri glide. Someone emailed me a picture of a tri glide on the lift and said I did not need the extensions. He also said they are not av ailable for the tr1500. Both statements are wrong. The extensions are listed under the tr1500 accessories for $249.50 and they will fit as my ramps have the holes to accept them. Also, the hd triglide, with the proper tires on the rear filled to proper inflation, drags the rear pully housing when loading or unloading. If I had the right info from your people I would have ordered the the extensions. AS it is I made my own out of steel I had here. They are one foot long 15 3/4 inches wide and 1 3/4 inches high. I suggest you train your people. They are costing you sales! [ FROM REDLINE - Sir, we checked into our email correspondence with you to see which salesman gave you bad information so that we could train him further. We found that your emailed question was regarding a Titan 1000D extension ramp and that the salesman's reply was correct as those two items are non-compatible because they are made by different manufacturers. Our apologies for the missing bolts; we'll reach out to you about getting you refunded for anything you had to buy. Thank you for your business!]

After decades in the auto industry this has been the best dolly Ive used. easy quick setup and massive adjustability.

It’s kinda handy rotating your bike 180 degrees in the garage. Plus I can push it an extra couple inches in any direction to store the bike optimally. Quite stable when put on center stand with the safety strap put in place to prevent the center stand from unloading your bike while driving it around.

Arrived 3 days after ordering undamaged. I Assembled it in 20 minutes added cleaning solution powered up and it works great! My opinion it Works best if the air pressure is over 80, but even at 70 psi it is still way better than any manual cleaning station I have used. For the price you can't go wrong with this spray washer!!

Works great, easy to assemble. Gives access to oil drain plugs to
Change fluids! Great little dolly! Well made!
Don’t even have to strap it down.

As a dealer tech I do alot of heavy engine repair on trucks. The newer design trucks no longer have a bumper to kneel on and the engines sit very low in the bay , as a result I have hurt my back several times trying to lift heads out and even breaking the bolts loose due to the poor positioning of ur back during the repair , I spent over 700 on another topside creeper and it helped but still had back issues , I saw this advertised on tik tok and ordered immediately , and thought this better be awesome for the price , I have never been more satisfied with a tool , worth every penny and would highly recommend to any tech working on trucks , this is a game changer!

Great table lift. Shipping was faster than expected. Lift was well packaged and arrived damage free. I have used the lift for work on my ATV and the lift height was just right. Had an issue with some of the paint comming off the hydraulic foot pump, called redline and the issue was resolved. The lift is built solid and exceeded my expectations. I would recommend this lift for ATV and motorcycle work.

"Redline RE26 Benchtop Abrasive Sand Blasting Cabinet"
Bought this excellent little benchtop blasting cab, and it arrived quickly but took some abuse in route which damaged a leg and scratched up some of the extra clear glass protective sheets for the viewing window. I contacted them, and they jumped to the issue and made things right immediately, sent out new parts to get it up and working very quickly. Hat's off to Ian and Larry for their excellent customer service on top of a great value product. Now, I am going to go have a blast with this little tool ;)

I am impressed. The table is stable and doesn't rock. The ram moves side to side easily yet isn't loose. The winch works good. I really cant find anything about it that I'm not fully satisfied with. And that's very rare for me. It came almost fully assembled so setup took less than an hour. The ram and the hose going to it was even pre filled so I didn't even have to bleed air or add oil. I am impressed. This is definitely not the typical "made in china" quality.

So far so good, it was easy to assemble and would have been easier if before everything was powder coated they deburred the inside of all the tubes.

I needed a table lift as I have knee problems and found it difficult to work on my mower and deck. I researched a lot of table lifts and I was surprised there weren't that many that are affordable for this single purpose. I settled on the 2200HD. After having this for a year, overall I am giving it 4 stars. A couple of reasons that kept it from 5 stars are: a few of the table end welds were extremely poor. 1/2" - 1" ragged gaps. Seriously, I am disappointed this made it past Q/C. Sent photos and all the company could do was offer $100 credit. In my opinion, the defects were enough to warrant replacement parts. It still is a sour spot for me having to look at them as a high schooler could have made better welds. Secondly, the deck tends to twist or torque once I start lifting the mower. The Mower weight is 900 lbs and the deck is rated at 2200 lbs. Third is the electric hydraulic motor. You can't plug this into even a heavy short extension cord(#12 wire). It bogs down. Hopefully, if I run a separate box with outlets this will correct this issue. I have a question into their support. Lastly, I need a Deck Hand for the 2200HD but don't see one listed for this model anymore. I hope they have one for this model.

We purchased our NSS-8XLT about 3years ago and totally love it. Easy to assemble only needed one other person to help with runway with the ram and help hold the pump up. BUT 2 is advised. Use it on chevy 1500, and Polaris RzR's

i bought a used handy lift , the foot pedal was m.i.a. , as handys prices are outrageous i opted for this replacement from redline . works as well as a handy BUT is much quieter. and that is a great improvement! thank you red line !!!!

Got the pump today and 15 minutes later was working on our RML-1500xl ranger lift. Also it is rebuild-able compared to ranger non rebuild-able pump! Very happy today to have a reliable solution. Shipped fast and packaged well. Thanks Larry and Redline.

This is a review of an Ideal Motorcycle Lift Table purchased from Redline in May of 2022. I purchased this item to assist me in working on small vehicles (lawn mowers/golf carts). It's turned out to be much more. I bought it after having had major low back surgery and being limited in my ability to bend. This table has been a life changer for me. The ability to adjust the height of the table makes doing a variety of activities possible.

I purchased the electric pump model so as to not have the extra pieces that come with the air model. I never planned to lift anything that heavy anyway. It's been a great fit for me with limited space and I couldn't be happier. Many of my friends have seen this table and I've recommended Redline if they want to explore getting one. Thanks so much for all your technical assistance when making this decision on what model would work best for me.

I never have used it for a motorcycle, I don't even own a motorcycle, but it has so many other uses, particularly with the extensions. Great piece of equipment that has made it possible for me to continue to work in the shop.

Thank you Redline!!

I purchased this jack on May 23rd, 2022 to use in the upcoming transmission replacement of my 2002 Dodge Ram 2500 pickup. When it arrived on the 31st, I opened the crate and began the assembly process. Then I noticed that the chains & hardware that go on top of the plate weren’t there. At that moment I thought this was going to be a total clusterf**k and that I would end up regretting the purchase. I e-mailed customer support about the missing items. After a few back & forth e-mails, and me sending them pictures of the assembled jack next to the empty crate, they quickly sent the parts that had been missing.
The June transmission swap went without a hitch. The jack worked flawlessly, up and down several times in the process. It handled my 47RE transmission like a champ.
When I finished using the jack I rolled it into a corner of my shop to collect dust until the next time I would need it.
Fast forward to August 21st, 2023, when I needed it to R & I the gas tank in my 1982 F-150 to replace the fuel pump. I raised the pickup on my lift, un-hooked all the fuel lines and wiring and loosened the mounting strap bolts. I rolled the jack over and raised it to meet the gas tank, taking the weight off the bolts so I could remove them. When I was ready to lower the tank, the release knob on the jack wouldn’t turn either direction. I tried with some force, hoping not to break anything in the process, but it would not turn. So I put the bolts back in to hold the tank in place. Fortunately there was enough height left in my lift that I was able to lift the truck off the jack and get it out of the way.
I knew the jack had a 1 year warranty, but I hoped that Redline Stands would still cover it even though it was about 3 months past the 1 year mark. I sent an e-mail to customer service and got a reply from Stephan at tech support within an hour or so. He had me send him a short video of what was happening with the jack so they could get with the supplier for a solution.
Stephan e-mailed me the next day letting me know they were still waiting for the supplier to get back to them.
I’ve been a mechanic for almost 40 years, so I’m not afraid to take stuff apart and put it back together. However, not knowing exactly how this jack functioned, I didn’t want to take the risk of breaking something in case Redline Stands would eventually warranty it. In reality I knew it wouldn’t be cost-effective to ship it back and have them ship me a replacement.
Stephan suggested I try to repair it myself. I asked him to find me a schematic, which he did, but it was extremely vague and somewhat blurry so I couldn’t tell what the pieces looked like or in what order they were assembled.
Two days later I received an e-mail from Stephan that contained a video of a person at the factory disassembling the jack. What a lifesaver! I did exactly what the guy did and had the jack repaired in minutes. It was just a knob return spring that had somehow gotten bound up inside the knob.
I got to use it on my fuel pump job after all. I used it again just before Christmas, 2023, for the transmission replacement in another of my vehicles.
The bottom line is that even though this transmission jack (and probably most others) was made in China, it’s not a piece of junk. It’s actually put together quite well. Moreover, if you buy something from Redline Stands and need customer service for any reason whatsoever, these folks are the absolute best. Thank you, Stephan.

I bought this a year ago for my 64 ranchero, best decision ever. I can rotate the car to any position, making access to panels for welding so much easier especially underneath. Way better than lying on your back cutting and welding. Rolls around the shop with ease, need extra space? Tip it on its side and move it out of the way.

Pedal works great. I chose resline stands pedal due to the 1/2" inch ports compared to the 1/4 or 3/8 inch ports other companies foot pedals have which would restrict the air flow. The less air restrictions in air fittings, especially for a blast cabinet, the better.

Purchased this for my shop to clean parts before they go in vapor honing cabinet. Works awesome with recycling detergent but needs a couple things to really make it great. One it needs a wiper system on window so that you can see while spraying parts. I added one myself just like i have on vapor honing cabinet. Two the fan exhaust needs a flange on it to allow you to be able to hook vent tube to it. You do need to vent this outside even if only using detergent. My ahop is 26x49 with 10ft ceilings and after cleaning a few parts you can taste the detergent in the air. I made a flange and connected a dryer vent to it and now its perfect.

We bought this as part of a booth display to show how our products could function for combustion engine testing and development. It is light enough for a single person to carry, yet detailed enough to be eye-catching and spur spontaneous conversations. With how easy it was to mount labels, tubes, and wires, this is a great alternative for those who don't need a functional engine to display.

We bought this tire changer because we didn't want to have to buy an expensive piece of equipment AND upgrade our air compressor capacity. This tire changer was perfect! Our previous tire machine would only allow us to change up to 15" tires. The TC500M works great for all our needs. The tubular metal arm that rotates the deck and works the bead breaker could be better constructed (ours bent) but other than that the TC500M has been a welcome addition to our workshop. The price was great and the customer service was great too!

I was searching the internet for a good garage lift to accommodate my Harley Roadglide. Looking through all the sites and lifts out there, I came across the Redline DT1K. It was a great lift with all the accessories included for a great price. Upon arriving, I could see the excellence in craftsmanship. Despite what other reviews say, I was able to lift my 900lb bike without issue using a small shop compressor with a 2 gallon storage tank, pushing 2.2 scfm at 90psi. You won’t be disappointed!

The Redline 3100 rotisserie is very well built and the perfect tool for a frame off restoration project…….. currently a ‘64 Malibu SS. I would highly recommend this product to anyone in the market.

Purchased this item Jan 2023 have been more then satisfied with it's quality & the way it works as advertised. I can lower the wheels & move my lift any where in my shop with ease & once I retract the wheels the lift does not move. Great product & well worth the cost.

I bought this rotisserie for multiple project's. My fist is a 64 chevy pickup. It bolted on easy. Once I got it balanced I can turn it with one hand. It makes easy to get to any part of the truck. I am completely salified.

To start, this truly is a great rotisserie for the the money. I'm restoring a 1983 Porsche 944 on it and its been great to have. Not doing much if any rust repair, but its made stripping the underside of undercoating a breeze and surely will make painting later much easier and will help yield a better result. Was super easy to set up and arrived undamaged. If your thinking about getting one for your home restoration I would recommend. It will save you time, your back, and aid in getting that professional result your going for.

Love this thing! Made everything so much easier working on the bike. Make sure to get the extended sides. I turned them upside down and used them as temp tool trays. It’s heavy, so you really need two people to set it up. Once it’s pieced together it’s really easy to move by one person with the handle and wheels. Had it for three years now with no problems

Purchased the ROT3000-LD for my brother. The rotisserie and the specific kit for a 2d Gen Camaro worked flawlessly. He was close enough to pick it up and that process went smoothly as well. The consumer support is great. I did my research and selected a great product. You can spend a lot more, but you won't get a better rotisserie. This device will serve us both well into the future. Thank you.

Very solid and well designed piece of equipment with little frame spring at higher loads. Only issue I have found is that the hydraulic release is too low on the far right, slowing down release on production operations.

This tranmission jack eliminates what would be a two man job to one man. It also is the safety feature we are all looking for when working alone especially under a vehicle..

This is possibly the best and most often used piece of equipment we have purchased.Absolutely love it.We use it for a final cleaning of carburetors to flush out contaminants after machining.It is well made and works perfectly. We are also looking into purchasing their engine run stand.A very reputable company to work with.

I bought this vice for my motorcycle lift and I couldn't be happier, works a treat just what I wanted
Thank you

I've had this for awhile and so far it's met my needs. Easy enough for one person to assemble most of it, I had to have my wife hold the side panels while I put them on but that was it. Instructions are not stellar but if you bought this you likely have enough mechanical sense to figure it out. I like how high it goes. The only thing I don't like is the unlock process to let it down, seems a little sketchy to me to be reaching around underneath it, but it's been ok so far.

I’m a recent owner of the 1500HD and haven’t used it yet to lift anything heaver than myself. It came well packaged and undamaged. This is definitely a nice lift and worth the money. That said, I’m using it for something other than lifting motorcycles or ATVs, so my critique may be meaningless to most people.

One of Redline’s Youtube videos states that it is “virtually effortless” to move because of the built in casters. I beg to differ. It is moveable but far from “virtually effortless”. As a matter of fact it is quite difficult to move, especially if it needs to be positioned fairly accurately (within 1/4 in.).

Also my platform is not flat. With nothing on it the platform sags about 1/2 in.

I also find the hose from the lift to the pump to be a bit short. With the lift all the way up (for easier moving) the pump can’t be put on the platform, so it is necessary to move the lift about 2 ft. then move the pump, them move the lift again, etc.

I especially love the bigger wheels. Makes it easy to push outside for the sandblaster. Has lived up to my expectations and then some.

Just bought this lift for my shop. Have no problems lifting my dirt bikes. Have done some maintenance using the lift it really is awesome to do an oil change and not have to get on the floor! My only negative is that the drop out don't line up with my dirt bike rear tire. Which is not a big deal for me. Though I'm sure I could adjust it so it does line up but, not a show stopper for me.

I wanted to upgrade my old thousand pound lift to a 1500 lb lift . Saw this and thought I would give it a try . Great table I love the height. Been working flawlessly. A couple of issues for a small engine shop that works on lawn mowers is riding lawn mowers won't go up on it it's a little too high off the ground. The blades get hung up on the edge trying to push up on the table and then I have to lift up the tractor to get the wheels on to get it on the lift. Last issue is color the stand is black all bolts and nuts disappear in the black. I wish whenever I bought they had color choices I would have went with a gray or a red something where Parts stand out instead of hiding in the black. My old thousand lb handy lift was about 20 years old I hope this one last just as long.

I have a 2014 HD Street Glide and a 1993 HD Fatboy, both lowered 1-1/2 to 2". The jack fits easily when I pull the bikes very slightly towards the upright position while sliding the jack underneath. No doubt it will slide under a stock height bike. Very smooth operation and I love the way it "slowly" lowers the bikes. The stand is awesome! Fits both bikes easily and VERY sturdy. I would highly recommend this to anyone looking for a jack and/or stand.

The build quality is great! Having adjustable height is also great! Have my 2008 Street Glide up on it, rolls around with ease! At full height makes it convenient to do engine work. Wish the casters had locks, but it doesn't seem to roll away easily. All in all, I highly recommend!

Very impressed with the quality and extra features. They have detent tabs that push out to prevent them from sliding off the table.

I purchased a body cart dolly from Redline. The interaction I had with the staff when purchasing was very helpful picking out the one that suits me best. It was shipped in a timely manner. Went to put it together and noticed there was no instructions included and was missing some bolts and washers. Watched the video on line on putting it together. It was very helpful and easy. I put our project car (68 Charger) on the dolly without any issues. I’m very satisfied with the product and the price. [Added by Redline: Customer is correct in that no instructions are included with this dolly. In the "videos" tab on this page, we have an assembly video for this product, which serves as our manual. If you receive one of our products and it is missing any hardware, please let us know and we'll either mail the missing hardware to you, or reimburse you for buying the nuts/bolts locally.]

After trying to clean and repair the old pedal that came with my unit, I decided to buy this one. The cover over the plunger is a little tight. Seems like I can only get the toe of the shoe inside it but other than that, it work great. I considered buying just the valve for my old unit, but this was a better deal.

I purchased a Handy BOB 1500 w/ the trike kit and absolutely love the product. Redline was very helpful with keeping me informed of availability of this product and in assisting with delivery.
Outstanding buying experience.

I like this lift very much. The only issue is the wheel vise doesn't function properly. [Note added from Redline - Many customers believe a wheel vise can and should hold a motorcycle up firmly without the need to strap the bike to the table. This is not correct with any motorcycle lift table, not just a Redline table. Please be sure to use ratchet straps to secure your bike to the table and do not solely rely on the wheel chock or vise.]

I bought this cabinet almost 2 years ago. Mine actually has the covered filter motor but other than that looks the same. It’s a great cabinet, however I did not do enough research before purchasing, we are a small manufacturing business and totally underestimated how much we would actually use the blaster, we work the dog out of it and we have run through a few parts keeping it running, this isn’t the fault of the machine. We will be upgrading soon but one point that is very important, the customer service from Redline, it’s been outstanding, they have everything we’ve broke in stock and shipped out very quickly, the support guys are very friendly and stay in gauged until our issues have been addressed. I can’t say enough good things about Redline service and as for this particular machine it is a work horse but if your working if 5-7 hours a day be prepared to clean the catch bucket every 3hrs or it’s a bear to unbuckle and hold up at the same time, also there is no back flow on the filter so that too needs to be removed and manually blown out and cleaned every 3 hrs. When comparing this to the 25k units you can decide if the huge price difference vs cleaning requirements is worth it. We have our guys shoot for 2.5 hrs, take a break, clean the machine then work another 2.5 and clean again then call it a day. So we get 5hrs of blasting done which works for us. I might mention the parts we have gone through, air hoses, window screens are kind of a pain, door shocks, the pressure pot block valve, air regulator but again a quick call to Redilne and they had what needed in the mail and to us with in a few days.

Bought the Redline 1500HD, motorcycle/atv lift. Also bought the electric/hydraulic upgrade. I did some fabrication to the base and recessed into the concrete floor. I scrapped all the metric hardware and put in SAE hardware. Haven’t used it to lift a motorcycle yet but did lift 1500 lb of sakcrete with it.? Did well. For the price I did expect better quality like zerk fittings, and a better grade of hardware. The warning of additional shipping charges should be stated on the website instead of the package. [From Redline: Please know that our website reads - Shipping upgrades offered in cart page. Sadly, this policy is forced upon us by Google. We were told by Google that if we did not move our state shipping surcharges off of our product page, Google would no longer show our advertisements in search results.]

Great customer service and fast shipping. The replacement foot control is a great upgrade from the original controller. Easy set up with minimal down time. Comes ready to go with fluid, hook up and you are back to work.

I purchased the Kernel Motorcycle Cruiser Center Stand Jack several months ago and was attracted to it because the handle broke down into two pieces and fit in my suitcase to take to my overseas assignment. I have another center stand lift in the US, but the handle was one piece. The Kernel stand does exactly what I wanted it to do; lift my 2022 Road King (FLHR) to allow me to clean the wheels and perform routine maintenance. One improvement would be to make the Stand Base (item 9 in parts list) and Stand Top (item 14 in parts list) two inches longer. Currently the handle extension is too close to the left saddlebag when in use, but it can be done. In addition, the Plastic Clamps (item 12 in parts list) do not hold the vinyl cover securely enough to the stand top. But overall, I would give it 4 stars.

It had no instructions but I figured it out and it works great!

This was used as a replacement to the original pump to a Harbor Frieght lift. I got lucky and found I have a direct switch. No issues in changing it out. Just should have bought the hoses along with it.

Great! No instructions as was advertised.

Tips for install - Remove grease fittings and nubs on left and right arms to slide out rods. My rods were not threaded - I fished them out with Allen wrench.

GREAT PRODUCT!!! Thanks!!!

While my workshop was being built, I had time to look at a LOT of lifts before getting this. I could have spent a lot more for a better one (like the grey Made In the U.S.A. one), or a lot less for a janky-but-does-the-job one (you know, the red one with the foot pedal from That Chain Store). This hit the Goldilocks spot of price/performance, especially when everybody else tacks on a couple hundred for shipping only after you've looked at your cart.

I'll start with the dislikes, because you have to have some. First, the powder coat comes off immediately where the rollers run along the rails. Kind of expected I guess because that's a heavy wear area and aside from rust prevention before delivery, powder coating it seems pointless. I'll just strip it all off where the rollers make contact and give 'em a light coat of WD to keep them from rusting, but cleaning up red flakes after the first few uses was sub-optimal.

Second, the roller-style dropout panel seems gimmicky to me. Unless you have a bike that is exactly the right length so that the rear tire sits on the rollers when the front's in the vise, or you want to park it on the sidestand while rolling your tire (sketchy), it's pointless, and it's a pretty big hole to push your bike through when loading and unloading. I know... some people love 'em; different strokes.

I had a local metal shop cut and bend a new panel from 1/8" sheet and bought some square tube to cut and weld in for support. $40 for materials and a can of red spray paint and I have a solid panel that fits even better than the original (which was fine, to be fair).

That's about it. Otherwise, after decades of crawling around on the ground when working on bikes, using it has been and exercise in "where have you been all my life!"

It's sturdy, especially with the stabilizer bar, and the finish seems durable so far after a couple of tool drops and oil dribbles. It raises quickly and easily with my 26 gal. compressor. I'm a hobbyist who works on my own bikes and sometimes does work for friends, and I expect this will give me years of use with little trouble.

My only regret is that I didn't get the side extensions which, since I've used the lift a few times, I now realize would come in really handy even if they're not a necessity.

I'll also say that Redline's customer service was excellent. I had questions about both the product and the shipping process that were answered promptly by actual humans. Plus, they have some really informative YouTube videos that helped me make my decision.

great quality , work great, quick arrive thanks redline

the machine is well made strong an works good. delivery was quik an i had it set up an running in no time. my only complaint is the safety lock pin is to easy to forget about it. if you forget about the pin and try to operate it, youll break the pin off. so long as you remember to raise the pin up hwen your ready to use it, your good and it works great, just dont forget that! id give it 5 stars if it wasnt for this. overall great machine adn would buy another

I was pleasantly surprised how smoothly everything went with my order and how fast I received my item considering it shipped truck freight. I haven’t had a chance to use this jack but assembly was straight forward and it operates smoothly. I don’t expect any issues with it. They informed me of a problem with shipping to my location and we got it straightened out. Redline is a great company to deal with.

I was looking for a 20 ton press and came across redline stands presses. I looked at presses on ebay and amazon which looked about the same build quality but had no customer service. So I purchased a 20 ton from redline stands. The shipping and packaging was on point. When it arrived I had one question about assembly so I called customer service and got a quick and polite answer to my question. After finishing the assembly the sleeve on the bottom of the ram was threaded crooked and was not flush when I tightened it up. I call again and a video, two day after a package arrived with a new ram and the collar piece. I switched out the collar piece and it was perfect. I called and told customer service everything was fine and I would send back the ram and collar. The same day I was emailed a return label. The customer service and technical assistance was outstanding!! If your looking for a press look no further redline stands it the place. A very good press but the customer and technical support was priceless. Thank you redline stands

Press is very well constructed, and functions exactly how you would expect, with plenty of power even before the tonnage limit. Nothing on it seems cheap with no corners cut. Shipping was a bit of a nightmare due to unforseen circumstances in the freight world, but Redline was quick to do everything in their power to get the machine to us intact and complete. Would absolutely do business again.

Assembly was fairly straightforward even though the instructions were translated and lacking in specifics. The unit is sturdy and works pretty well. The top of mine doesn't quite line up correctly, but the clip holds it in place. It does blow some media out through the top seams even at a pressure of 40 psi. After a short period, it becomes very difficult to see what is happening inside the cabinet even with the light. I may try to add a port for a Shop-Vac to evacuate the dust. I am using glass bead with an equivalent of 80-100 grit.

Easy assembly, quality and makes working on your projects much easier no matter what they are.

I recently purchased a Redline Rotesserie. I will say, the rotesserie is great … but.. the company is even better. The delivery as well as communication was better that one expects now days. When I purchased the rotesserie, I was not aware of the other items that Redline sells. If you need anything related to automotive restoration or even shop equipment, look no further. And NO… I am not a “paid” spokesman for Redline..just a totally satisfied and soon repeat customer !

Seriusly though, why is this thing so cheap? Mine is awesome! Ben using it about 6 months and its a soilid peace of equipment.

Overall super nice but wish it had a front drop out panel. Would have given 5 stars if it had the front drop out.

This ain't no import crap and it shows. Extremely heavy duty and the little tool trays are handy for nuts and bolts. Main factor was that the sides were pieces instead of two so I can set it up for my Spyder. Redline guys knew their s***

Luv my lift. The sliding wheel chock is awesome as I have two bikes. Super good welds and finish. I like it has two pedals for up and down instead of one. Very high quality.

I've been using mine for over a year and it's awesome. Good features and price. Reline sales made it easy to ship to Canada although it cost a little more it was worth it.

This thing is friggin amazing! Tons of height an super smooth to operate. Just dont lower the lift with adrop panel hanging down or it will scratch the cylinder. Dont ask me how I know ha

I purchased this lift because I have a bad back and can't work from the floor or a seat anymore and this lift has been great. I purchased in 2020 so I've been using daily for about 3 years. I use this to work on golf carts, ATV's, lawn equipment, as a table lift and it's never had issue lifting anything up to 1500 lbs. My only regret is I didn't not purchase the electric upgrade because my compressor wasn't efficient enough to keep up with the demand of the table and I had to upgrade my compressor. After speaking to Redline support (which was extremely helpful) they informed me the compressor needs to be at least 7 CFM otherwise it will run the entire time you lift the table (super annoying!). But the table is great, no issues, super solid!

Works great I installed one to go to the basement for my wife

when I buy one where can I get someone to install it if someone can let me know thanks

I purchased the redline 1500hd lift table . The table is heavy duty built solid.once opened crate I was a easy set up and the guys at redline was great to with friendly and helpful during purchase. And to answer some questions YES a Harley Davidson tri glide ( trike ) will fit on the table perfect and lift it .

I started a small business last year and have seen some growth. Wife has heard me complaining about my small desktop press and did this with out me knowing. It arrived today and it's great! I was worried that the guys at Redline might take advantage of her, but she said they were great and walked her through the entire process even showing her competitior presses. Thank you to the sales staff. It is truely appreciated!!!

Started a smithing company 3 years ago with a desk top HF sand blaster. It worked pretty good and got me built up in business so I needed a biigger cabinet. Went to RL an found this one. It was kind of frustrating to get start at first but the guy at Redline was Johnny on the spot and got be up in no time. Great customer service after the sale.

This is a great lift overall. The packaging was very good. No scratches or dents on any of the parts. Very heavy and stable lift table. Great color choices. I chose orange. The air over hydraulic ram works very well. Smooth down. I love the side extensions. The front extension makes it a little long for my Softail. I’ll have to remove it for most of my work. The only thing I did differently was to immediately replace the pins for the extensions. The ones that come with it are a sliced open arm or leg waiting to happen.

We needed to mount a unibody to the rotisserie to rotate it so we could get through our double doors, as the body was too wide to go though just on a dolly. The stand came in a crate and it was well packed. It went together fairly easy. The instructions could have been a little better, but just looking at the parts and the additional pictures online, we did not have any issues. It is a great product for the price. THANKS!!!

Good luck finding a 200 ton press for this price anywhere else. All the other ones we found were way more money and had long lead times. I wish they made bed plates or custom tooling, but we were able to get ours made at a local machine shop.

It looks to be a quality cabinet. Haven't used it yet, but very much looking forward to it. Great people to deal with and great customer service. Would highly recommend. Look forward to future purchases.

We use this press daily and it performs. Great value for a press this big. Needed some technical help when we first set it up because the pump was making noise. They told us to add some more fluid and boom, flawless ever since.

Redline Stands I got it fixed last night. I took oil line off of the gauge and there is that inline screw that was left in there. I unscrewed it and took out completely. Everything works perfectly now. Its a good press, glad I bought it.

This thing is huge, but in a good way. I was going to buy their other electric 100 Ton press, but then I noticed that this one has a throat width about 10” wider. That extra space works well for me as some of my components are BIG. Only four stars because the winch sticks out on the side. I wish it was tucked inside the frame like the other model they sell.

Like that it has two speeds my last press was air powered too but only had one speed. I use the fast setting to take up the gap and then change to the lower speed to finish the job. I was worried that you get what you pay for but in this case you get a lot of machine and it works well for way less than other brands You won’t be disappointed.

Not bad seals up good and only leaks sand when you open the door so be prepared for that. works well with my 12 cfm air compressor and remove paint quickly. Construction was an 8 outta 10 my only complaint is lack of vacuum system to filter out the dust but i didnt pay the price of a vacuum equipped blaster so i guess i can’t complain. Over all it works pretty good and Id recommend it

So if you’re planning to roll the rotisserie outdoors across dirt or gravel without this kit, it ain’t happening. The quality is solid, but 1 of my tires was losing air. I contacted Jason at Redline and he sent me a new tire/wheel so I’m good to go now. Pay attention to the fact that the wheels in the center mount higher than the standard wheels. This causes you to have to raise the car higher in order to rotate the car to clear the larger wheels. I think the price is a little high for what it is, but if you gotta have it, you gotta have it.

This thing is a beast! The welds are solid and the powder coating is good, not great, but okay. Took a while to assemble cause the instructions were so so. The pictures on the website were more help than the instructions. Make sure you get it balanced correctly, cuz if you don’t, the car will flip over fast enough that it aint no fun. Once I got used to operating it I can’t imagine restoring a car without it.

Oh my God I shoulda bought one of these years ago. It makes doing a restoration soooo much easier. Overall, the build quality is great. The casters roll easy, the balancer works well, and the gear drive is an absolute must. Allows you to stop the car at any angle you want. The gear drive has a little bit of play in it, so be prepared to use the locking jam bolt at the opposite end to stabilize the car at whatever angle you decide. Should have bought the body dolly adapter kit with mine cause now when I’m trying to work on the firewall, the rotisserie is in the way. Overall, I give it 4 outta 5 stars.

Got It! Installed it! Thanks for the great service!!!

this thing is rock solid it’s a bit hard to move with the casters but they still work okay i guess. It goes up a lil slow but has no problem lifting my 2014 harley davidson electra glide or my industrial zero turn riding mower. the safety bar works really good to and id buy another for sure

Been shopping for a while and finally go the ok from the wife to pull the trigger. Salesman was very helpful and answered all my silly questions. Crate arrived damaged and vise was missing. Called the guy and he got me a replcement vise shipped that day. All in all it was a very good experience

Overall, pretty impressed. The welds are decent but not amazing. Same can be said for the powder coating. The drop-out tail section is really handy and functions well. I’m giving it 4 stars because it has no ability to attach side extensions, so you can’t use it on ATV’s and riding lawn mowers.

Have you ever tried to do all the metal work, cleaning, cutting, welding while laying on your back under the car??? I was doing that. I wanted to make life easier on myself. I started looking at rotisseries. There were 2 major concerns I had.
1. Was the rotisserie really going to be the quality I expected for the money?
2. Would I have the ceiling clearance to flip my 57 Chevy in a residential garage with an 8 foot ceiling?

The answer to both is YES! The product is beautiful and definitely what I expected! I was able to flip my car in my garage. Now, my neck and back feel way better because I can work standing next to the floorboards.

I read all the reviews and some of them helped me make my decision. I hope my review helps make others happy when they get theirs! The staff is very helpful, responsive and professional! They are willing to help! JKing was VERY helpful to me. Shipping was very fast!

Like others said, the instructions could be a little better, but if you’re mechanically inclined, it’s a 1.5-2 hour assembly. Would buy this a 1000 times over! I love it! Thank you from Cleveland, Ohio!

I have one of the original central machinery motorcycle tables from harbor freight. My pump wouldn’t stop leaking I tired new seals and that didn’t help. I purchased this and a piece of 1” solid round bar from tractor supply and 15 mins later I was back in business. Thank you so much!!

can yall build a lift to raise 13' with contols at bottom and top. Response from Redline - Sir, you have left a review, not a question. Because of this, we have no ability to contact you with the answer and thus, we hope you see this reply. No sir, we do not offer any custom lift fabrication services. Thanks Mr. Warner.

I bought one yesterday to rotate the tires on my kids car. The old jack I had was dead. I was really impressed with the quality and ease of use. Great jack for the money.

Purchased the ROT300-LD and product was shipped the next day. Picked up at Freight carriers and was in good condition no damage. Instructions are a little weak, but if you're a car guy you can put together in 2 hours by just using the exploded view diagram...not hard at all. Construction is surprisingly good, nice welds, good thickness tubing, etc. Will get a lot of use out of this unit. Well worth the money!