All Product Reviews

I bought this combo to work on my Harley’s, and for that purpose it works quite well. The standout piece is the stand, as working from the jack does not inspire a lot of confidence, but once in the stand I really feel like I can move and work on the bike with it feeling absolutely solid. Quality wise it’s a solid piece overall, I did have the hydraulic pump fail after a few uses but they warrantied it promptly which was great. If you want to do some occasional light-med work on your bike without having to buy a huge platform this works great. It would also be excellent for storing multiple bikes on additional stands as they take up way less space off the side stand. Overall Its a good value, but if you think you might really want to do more involved work on your bike go for a platform that takes it off the ground to save your back. I gave it four stars for the pump failure and one of the treads slid off and I have to reglue it. But again, I did receive great service for the pump.

Was an easy process to order when calling. Cylinder was shipped pretty fast and had it within a week. It was packaged well to protect the ends. It was a stock replacement and appeared to be made by the same manufacturer that made the lift (Tuxedo). Redline offered the best price shipped to my location. Would do business again. Thanks

Doing exactly what we purchased this for. We have to clean grease off/out of a lot of items every day and once the detergent gets heated it really does the job. The only issue we've had is the air connection wouldn't seal around our air fitting, purchased a new air fitting and it's working fine with no leaks.

Perfect if uor using multiple guns with pps. Guns hang as the should without cups and allows you to hang 7 guns.
If you don't have one your really missing out

called harbor freight for a pump for my motorcycle lift said it would take a month called back in a month still no pump . found redline on internet pump is here in couple days working like a champ great service great shipping i will refer anybody to this company . thanks again . mark r

This press was a lot nicer then I expected. The only issue I had was in the packaging. Nothing stayed in place inside the shipping box, which caused the protective caps on the hydraulic hoses to come off and it leaked hydraulic fluid everywhere. Once everything was wiped down and assembled it was great.

Great cart, exactly what I needed, sturdy, rolls easy, locking wheels

100% would recommend and buy again. Awesome lift. Lifts higher than any other powertrainift I've use before so now I don't have to drop the rack to accommodate a lower lift. Easy to assemble. .most of it was already preassembled. Great price too. Way cheaper than OTC and Norco for the same style lift but lifts higher.

Works great when moving the lift is needed. Wheels sit out of the way when not needed.

we bought this 200 ton press to use in a mining shop where we abuse the hell out of tooling . the only issue we have is the cable to raise and lower the bed is routed in a bad spot , other than that it works great .

I was looking to add a gearbox to a rotisserie I already had. This add on kit was the only solution that even came close. I was able to add this with just a little modification. Excellent quality product, moves my rotisserie with minimal effort.

The press works better than expected. I would recommend the press to anyone looking for a great quality press

I bought the pump to replace the one on my harbor freight lift. It works great. I would recommend the pump to anyone who needs one.

Works great and for any additional adding to your project.

Perfect fit, easy installation and fast delivery. Gear drive works smoothly and took less than a hour to replace.

I looked at several different brands of motorcycle lift jacks. The safety catch arms on most other brands appeared to have flimsy looking flat bars that barely catch the safety detents whereas Redline's jack uses square tubing. This is a great jack that is made of quality parts, easy to assemble, and works great. Paired with Redline's SD1K ATV Motorcycle Engine Cradle Dolly allows me to quickly and easily jack up my Road Glide and put it on something solid for longer term use with the ease of rolling around. I highly recommend this product and I would also recommend buying this as a package deal with the Engine Cradle Dolly. Tried using a scissor jack for a while but should have bought this from the start and saved myself the headaches and hassles! [From Redline: Dear Gary, are you interested in a salesman position here at Redline? LOL]

Seems like a solid unit with bright light. Waiting on media, have not used yet. Great communication with Ian.

went together fairly well. after putting my car on rot. I think it needs locking bolts in main rotation housing. car moves around too much while working on it. other than that it seems to be well built. haven't fine tuned rotating the car. still too top heavy, need to watch u-tube more to get it correct

Lift came very fast with no issues. Directions weren't the best but figured it out. It is very well made. Did not get the electric motor and it works just fine and moves quick. I have a Ultra Limited and it fits great. Plenty of room. No regrets and would buy again.

I looked at motorcycle lifts for several years and finally decided to go with the Redline 1500TR. I own both a Can Am Spyder F3T and a Harley Davidson Freewheeler. This lift works great for me, makes cleaning a breeze and best part is no more crawling around on my knees.

Works for the extra space I needed. Once bolted together very sturdy, just wish the panels also bolted to the lift & not just to each other. Small issue with damaged powder coat in shipping, but Redline & K&L fixed me up asap.

Paired with Redline's motorcycle lift jack allows me to quickly and easily jack up my Road Glide and put it on something solid for longer term use with the ease of rolling around. Great quality and easy to put together. This is a great product and is cheaper than the other ones on the market. I highly recommend this product and I would also recommend buying this as a package deal with the lift jack. Tried using a scissor jack for a while, but what a pain and hassle to use!

Car crafting should be a pleasure, not a pain
This IS the right tool for the right job. Steady and strong at 6’.

The Blasting Tray works great for keeping control of parts while blasting. Especially when you have multiple small to medium sized parts being blasted at the same time.

Boron Carbide Nozzles last substantially longer than the ceramic nozzles. Have significant increase in nozzle life when using with Steel Shot.

Received everything in a timely manner. Easy to add anything you need to adapt to the engine you need SBC, LS, ETC.

The lined Jenessco gloves are a great improvement for the REPP70 cabinet. Heavy duty while still allowing great gripping and maneuverability holding small and large parts while blasting.

I ordered this pump to replace the pump on my Craftsman motorcycle lift. It fit perfectly and worked like a "charm"! Thanks Redline.

Likes. Is adjustable fro both height and width. Can use it on both my motorcycles and open put things on it to move around. Seems quality. Heaviest bike I have used it on is 700lbs and moved well on smooth concrete.
Dislike: no locking wheels. Have to hold in place with wheel chocks or wooden wedges. It moves away from you or towards you when working on things on it. Very annoying and only reason it didn't receive 5 stars. [From Redline: Excellent feedback sir. We'll email our manufacturer now and request locking casters on future models. Granted, that will take some time. In the meantime, you might consider www.McMaster.com for locking casters to replace the ones that come with the SD1K should you desire. Thanks for your business!]

This foot pedal works great on my Titan Lift!! The original Titan pedal broke, and Titan doesn’t make the pedals anymore…..I bought a different pedal on Amazon and it wouldn’t lift my trike. I had a friend who recommended your pedal, so I bought it and it works great!!!

It gets super hot an cleans really well just be careful you dont let it get to low on water cause thatll make the motor start to suck air into the sysetm Im really happy with it

Jack works great but not a drop in replacement as it dosent come with 1” round bar necessary to complete the install.other than that it works great.i gave it a 4stars just because of the round bar problem. [From Redline: Sir, 1 inch round bar is not respresented on our website as part of this product. Only the replacement pump is offered in this listing.]

Machine is only a few months old. Water pump stared to leak. Company sent out a new seal but didn't send O-rings needed to install the seal. Now I'm told O-rings are on back order and I have a machine I can't use. [From Redline: Our apologies sir. I believe our newest tech handled your warranty shipment and he's still getting acquainted with the product line and how to handle issues. I believe we have those seals coming in this week and can get you fixed up asap. If I'm wrong, we'll get an air shipment of seals so either way; we got you covered. Please stand by for email correspondence.]

I spent months researching motorcycle lifts before I decided on this one. This lift is PERFECT. It is perfect because my 2014 Electra Glide Ultra Classic on it easily AND my father-in-laws 2020 Harley Tri Glide ALSO fits on it. For anyone looking to get a lift, if you have the ability to pick up in Pensacola make the trip. You will meet the most courteous and polite people in the world. Their customer service should be a model for all other businesses

Love the finish of the metal... Solidly finished, easy to put together and adjustable.. Tray was tweaked a little, but able to get back in shape.. 4 out od 5 stars due to the plastic casters. Threw them away and installed some solid quality casters.. Glad I purchased.

Works good. Glad I bougth it. My guys use it a lot.

I purchased this as a less expensive option to move my Harley Dyna around and do some wok on it( change tires). My jack fits in it. It supports the 700 lb bike well. Glad I didn't pay more.

I wish I had bought this thing 20 years ago. Best decision I ever made was to buy a redline lift now I don’t have to lay on my back anymore to change oil to work on the bike. I don’t get a backache anymore I just raised the bike to the perfect level and it is the best thing I ever bought for my Harley Better than any piece of chrome I have bought thanks Redline

We are an automotive recycler with 9 dismantlers. This jack has made removing heavier parts out of vehicles with ease and less strain on my guys. Over all the dismantlers love this jack an I would recommend this to any shop or auto salvage yard.

I recently purchased this rotisserie to restore a classic mustang.
I also purchased the accessory mount kit to allow me to mount the car more easily. I am very impressed with this piece of equipment. I will be using it in future builds as well. If you look in the video section, you will see my review.

Packaged really well for being shipped in boxes.. Solid metal and not thin. Hardware? I got rid of all of it and bought some quality 10.9 grade metric bolts.. Not a fan of being metric.. Coating is solid and even with some parts touching, no coating came off.. The threaded caster holes on the bases was not the best quality. Weld spatter on two holes where I had to file off so I could insert a bolt. I ended up rethreading all the bolt holes as several bolts were hard to turn in.. That was before getting the new hardware.. Once rethreaded, no problems at all.. Casters were solid, really like the size and thickness.. Once I changed the hardware and retreaded the caster holes, I believe this will be a solid car body cart..

Great product best thing to have when you’re traveling , working on bikes at motorcycle events!!

The pictures don’t do it justice. This thing is strong. Was easy to put together and mount. Fully adjustable to any rim. I did get black rubber hose, split it and wrapped the center pipe to protect the rims from rubbing on the pipe. Very pleased with the rack

well built strong sturdy does what is says it will do. Love the fact that I can get the bikes in a position where I can work on my feet and not be so low to the ground.

Looks good, seems to operate properly, I haven't used since I bought it due to heart attack

This is my second MC625R table in 10 years. Sold the first when we moved to a smaller house but missed it too much over the years. Bought this new one because I loved the old one, it's very high build quality, and smooth lifting. Twin cylinders make all the difference. I highly recommend this lift, but whatever model you decide on, if you have an 800+ pound bike, always get one with the built-in track on the bottom. To me, it's too risky to lose that long footprint on the floor as you raise the bike on the models with no stationary track. Also, you don't have to worry about the wheels marking up the floor or getting hung up on a forgotten obstacle. Also, I highly recommend the wheel kit to easily move it around the shop if needed. Last comment, the lift table arrived in perfect condition, well wrapped and protected - couldn't be happier with the entire process.

Has performed a advertised. Easy to assemble with no difficulty. Did not use extension as it is not necessary for my use. So far very pleased with my purchase.

Light bar in the 42 HPW don't last 12-14 months. 2nd Unit I've had & both lights crap out about same time. Gloves aren't that great either. Other than that, fairly happy with what does.

Very easy to use and looks sturdy enough to cary my bike. Easy storage.

I'm glad I bought my cabnet from here. The fact that they have replacement parts listed right on their website is such a relief. I had to throw my last one cabinet away becuase that company did not have parts.

Very pleased with how well built this press is. I've used other presses in the past that were flimsy & shaky, but not this one. Well done. Works flawlessly. I got the foot pedal attachment & its so awesome to be able to use both hands to steady the object & still be able operate it.

I have had trouble with these types of stands not giving enough space for four wheels to fit at the same time. I'm glad I found this one as it has a staggered arm design that just makes sense. Good job Red Line!

The online photos don’t do this thing justice. It’s solid! I was actually surprised how strong it was once I got it put together. Very pleased

I have only had the table a few weeks and it is working very well I will not really know more until some time has past. So far product is working well and is all it was advertised to be.

I used a Harbor Freight siphon hose type blast cabinet for several years in my home/hobby shop. Poor lighting, the cabinet filled with dust almost immediately, and the gun/hose/nozzle clogged frequently.

I bought the REPP70 Pressure Pot Blast Cabinet, and wow what a difference. It’s foot pedal operated. Over the past couple of weeks I have blasted dozens of small parts - fan blades, pulleys, air cleaner assemblies, brackets, etc - the cabinet and opening could accommodate an engine block if needed. My first time using this cabinet I blasted parts to bare metal in an hour that would have taken me 4-hours or more in the past, and they would have come out nowhere nearly as clean. I literally took before and after pictures and timed this. I wanted to know the value of the money I had just spent; it’s worth every penny. The cabinet is well lit. The vacuum keeps it clear, and your work piece is clearly visible. Not a single clog. The cabinet does what I need it to do quickly and efficiently.

Nice piece of equipment! Works just as advertised,

Luckily despite the bottom of the crate being blown out no parts were missing. Some paint scratches here and there and road rash on parts from getting dragged here there though. One other thing, the set up failed to inform to grease the large slip joints that the rams control. Once loaded, and if you have raised the rams the slip joints, big square tube slip joints, dont drop unless you shake and tap plus do everything you can to get them to drop. Grease i suppose would have cured that. But so far seems to be a good unit. Worth the money for sure.

Its everything i expected for a cabinet this size. Seems like the overhead light could be considerably brighter for these old eyes though. Problem was the weak shipping crate had a few holes in it which caused some minor damage to a couple areas in the form of paint scratches. The crate should be able to withstand more abuse.

Shipping went good with no damage. Takes about 20 mins to assemble. So far it seems to work good. I did end up having to modify it with a duct flange and duct tubing to vent outside otherwise the chemicals vaporize in the cabinet and come out the exhaust fan where your working. Don’t breathe that in. Good way to clear the viewing glass is the close the valve for the chemical and just shoot air on the glass to clear it.

I purchased the RL135 kit. The jack works perfectly. It easily lifts my 2012 Ultra Limited. It did take some attempts to orientate the Ultra Limited, so the front and back wheels lifted near the same height. The assembly instructions were very basic but were sufficient. I have not used the dolly yet as it came after I had used the jack and had it put away.

Shipped fast. Easy assembly. Shipping create could be made a little stronger.

I actually ordered a mc615r, but I’m glad K&L had them back ordered. This mc500r electric lift is well worth the couple hundred extra vs the air version, both being 1000lb. This lift is quiet and super smooth. No jerking and can basically plug in anywhere. Redline answers their phones and responds to emails quickly. I will keep giving them my buisness.

You should bring this back into production. It’s exactly what I need and

I ordered this lift with pickup at the freight facility. The facility never called to say it was in so I contacted redline customer service and the problem was handled immediately. After receiving the table assembly was pretty straightforward. The lift works great and lifts my Harley Limited with no problems. This lift definitely saves my back and makes working on my bike much easier. Thanks Resline for a great product

I am very pleased with the quality & performance of this press. It worked flawlessy. Having the pedal accessory made it very easy to hold the pieces in place while using the press was just awesome.

I received the lift in good condition when expected. There were no bolts for the wheel stop. The wheels on the lift could be a better quality. I could not install the tip over bar. The tube it goes through was welded off location. I had to open up the exit hole on the right side. Overall, it is a great lift. Before I ordered it I asked if you need the ramp extensions to use it for a Harley tri glide. Someone emailed me a picture of a tri glide on the lift and said I did not need the extensions. He also said they are not av ailable for the tr1500. Both statements are wrong. The extensions are listed under the tr1500 accessories for $249.50 and they will fit as my ramps have the holes to accept them. Also, the hd triglide, with the proper tires on the rear filled to proper inflation, drags the rear pully housing when loading or unloading. If I had the right info from your people I would have ordered the the extensions. AS it is I made my own out of steel I had here. They are one foot long 15 3/4 inches wide and 1 3/4 inches high. I suggest you train your people. They are costing you sales! [ FROM REDLINE - Sir, we checked into our email correspondence with you to see which salesman gave you bad information so that we could train him further. We found that your emailed question was regarding a Titan 1000D extension ramp and that the salesman's reply was correct as those two items are non-compatible because they are made by different manufacturers. Our apologies for the missing bolts; we'll reach out to you about getting you refunded for anything you had to buy. Thank you for your business!]

After decades in the auto industry this has been the best dolly Ive used. easy quick setup and massive adjustability.

It’s kinda handy rotating your bike 180 degrees in the garage. Plus I can push it an extra couple inches in any direction to store the bike optimally. Quite stable when put on center stand with the safety strap put in place to prevent the center stand from unloading your bike while driving it around.

Arrived 3 days after ordering undamaged. I Assembled it in 20 minutes added cleaning solution powered up and it works great! My opinion it Works best if the air pressure is over 80, but even at 70 psi it is still way better than any manual cleaning station I have used. For the price you can't go wrong with this spray washer!!

Works great, easy to assemble. Gives access to oil drain plugs to
Change fluids! Great little dolly! Well made!
Don’t even have to strap it down.

As a dealer tech I do alot of heavy engine repair on trucks. The newer design trucks no longer have a bumper to kneel on and the engines sit very low in the bay , as a result I have hurt my back several times trying to lift heads out and even breaking the bolts loose due to the poor positioning of ur back during the repair , I spent over 700 on another topside creeper and it helped but still had back issues , I saw this advertised on tik tok and ordered immediately , and thought this better be awesome for the price , I have never been more satisfied with a tool , worth every penny and would highly recommend to any tech working on trucks , this is a game changer!

Great table lift. Shipping was faster than expected. Lift was well packaged and arrived damage free. I have used the lift for work on my ATV and the lift height was just right. Had an issue with some of the paint comming off the hydraulic foot pump, called redline and the issue was resolved. The lift is built solid and exceeded my expectations. I would recommend this lift for ATV and motorcycle work.

"Redline RE26 Benchtop Abrasive Sand Blasting Cabinet"
Bought this excellent little benchtop blasting cab, and it arrived quickly but took some abuse in route which damaged a leg and scratched up some of the extra clear glass protective sheets for the viewing window. I contacted them, and they jumped to the issue and made things right immediately, sent out new parts to get it up and working very quickly. Hat's off to Ian and Larry for their excellent customer service on top of a great value product. Now, I am going to go have a blast with this little tool ;)

I am impressed. The table is stable and doesn't rock. The ram moves side to side easily yet isn't loose. The winch works good. I really cant find anything about it that I'm not fully satisfied with. And that's very rare for me. It came almost fully assembled so setup took less than an hour. The ram and the hose going to it was even pre filled so I didn't even have to bleed air or add oil. I am impressed. This is definitely not the typical "made in china" quality.

So far so good, it was easy to assemble and would have been easier if before everything was powder coated they deburred the inside of all the tubes.

I needed a table lift as I have knee problems and found it difficult to work on my mower and deck. I researched a lot of table lifts and I was surprised there weren't that many that are affordable for this single purpose. I settled on the 2200HD. After having this for a year, overall I am giving it 4 stars. A couple of reasons that kept it from 5 stars are: a few of the table end welds were extremely poor. 1/2" - 1" ragged gaps. Seriously, I am disappointed this made it past Q/C. Sent photos and all the company could do was offer $100 credit. In my opinion, the defects were enough to warrant replacement parts. It still is a sour spot for me having to look at them as a high schooler could have made better welds. Secondly, the deck tends to twist or torque once I start lifting the mower. The Mower weight is 900 lbs and the deck is rated at 2200 lbs. Third is the electric hydraulic motor. You can't plug this into even a heavy short extension cord(#12 wire). It bogs down. Hopefully, if I run a separate box with outlets this will correct this issue. I have a question into their support. Lastly, I need a Deck Hand for the 2200HD but don't see one listed for this model anymore. I hope they have one for this model.

We purchased our NSS-8XLT about 3years ago and totally love it. Easy to assemble only needed one other person to help with runway with the ram and help hold the pump up. BUT 2 is advised. Use it on chevy 1500, and Polaris RzR's

i bought a used handy lift , the foot pedal was m.i.a. , as handys prices are outrageous i opted for this replacement from redline . works as well as a handy BUT is much quieter. and that is a great improvement! thank you red line !!!!

Got the pump today and 15 minutes later was working on our RML-1500xl ranger lift. Also it is rebuild-able compared to ranger non rebuild-able pump! Very happy today to have a reliable solution. Shipped fast and packaged well. Thanks Larry and Redline.

This is a review of an Ideal Motorcycle Lift Table purchased from Redline in May of 2022. I purchased this item to assist me in working on small vehicles (lawn mowers/golf carts). It's turned out to be much more. I bought it after having had major low back surgery and being limited in my ability to bend. This table has been a life changer for me. The ability to adjust the height of the table makes doing a variety of activities possible.

I purchased the electric pump model so as to not have the extra pieces that come with the air model. I never planned to lift anything that heavy anyway. It's been a great fit for me with limited space and I couldn't be happier. Many of my friends have seen this table and I've recommended Redline if they want to explore getting one. Thanks so much for all your technical assistance when making this decision on what model would work best for me.

I never have used it for a motorcycle, I don't even own a motorcycle, but it has so many other uses, particularly with the extensions. Great piece of equipment that has made it possible for me to continue to work in the shop.

Thank you Redline!!

I purchased this jack on May 23rd, 2022 to use in the upcoming transmission replacement of my 2002 Dodge Ram 2500 pickup. When it arrived on the 31st, I opened the crate and began the assembly process. Then I noticed that the chains & hardware that go on top of the plate weren’t there. At that moment I thought this was going to be a total clusterf**k and that I would end up regretting the purchase. I e-mailed customer support about the missing items. After a few back & forth e-mails, and me sending them pictures of the assembled jack next to the empty crate, they quickly sent the parts that had been missing.
The June transmission swap went without a hitch. The jack worked flawlessly, up and down several times in the process. It handled my 47RE transmission like a champ.
When I finished using the jack I rolled it into a corner of my shop to collect dust until the next time I would need it.
Fast forward to August 21st, 2023, when I needed it to R & I the gas tank in my 1982 F-150 to replace the fuel pump. I raised the pickup on my lift, un-hooked all the fuel lines and wiring and loosened the mounting strap bolts. I rolled the jack over and raised it to meet the gas tank, taking the weight off the bolts so I could remove them. When I was ready to lower the tank, the release knob on the jack wouldn’t turn either direction. I tried with some force, hoping not to break anything in the process, but it would not turn. So I put the bolts back in to hold the tank in place. Fortunately there was enough height left in my lift that I was able to lift the truck off the jack and get it out of the way.
I knew the jack had a 1 year warranty, but I hoped that Redline Stands would still cover it even though it was about 3 months past the 1 year mark. I sent an e-mail to customer service and got a reply from Stephan at tech support within an hour or so. He had me send him a short video of what was happening with the jack so they could get with the supplier for a solution.
Stephan e-mailed me the next day letting me know they were still waiting for the supplier to get back to them.
I’ve been a mechanic for almost 40 years, so I’m not afraid to take stuff apart and put it back together. However, not knowing exactly how this jack functioned, I didn’t want to take the risk of breaking something in case Redline Stands would eventually warranty it. In reality I knew it wouldn’t be cost-effective to ship it back and have them ship me a replacement.
Stephan suggested I try to repair it myself. I asked him to find me a schematic, which he did, but it was extremely vague and somewhat blurry so I couldn’t tell what the pieces looked like or in what order they were assembled.
Two days later I received an e-mail from Stephan that contained a video of a person at the factory disassembling the jack. What a lifesaver! I did exactly what the guy did and had the jack repaired in minutes. It was just a knob return spring that had somehow gotten bound up inside the knob.
I got to use it on my fuel pump job after all. I used it again just before Christmas, 2023, for the transmission replacement in another of my vehicles.
The bottom line is that even though this transmission jack (and probably most others) was made in China, it’s not a piece of junk. It’s actually put together quite well. Moreover, if you buy something from Redline Stands and need customer service for any reason whatsoever, these folks are the absolute best. Thank you, Stephan.

I bought this a year ago for my 64 ranchero, best decision ever. I can rotate the car to any position, making access to panels for welding so much easier especially underneath. Way better than lying on your back cutting and welding. Rolls around the shop with ease, need extra space? Tip it on its side and move it out of the way.

Pedal works great. I chose resline stands pedal due to the 1/2" inch ports compared to the 1/4 or 3/8 inch ports other companies foot pedals have which would restrict the air flow. The less air restrictions in air fittings, especially for a blast cabinet, the better.

Purchased this for my shop to clean parts before they go in vapor honing cabinet. Works awesome with recycling detergent but needs a couple things to really make it great. One it needs a wiper system on window so that you can see while spraying parts. I added one myself just like i have on vapor honing cabinet. Two the fan exhaust needs a flange on it to allow you to be able to hook vent tube to it. You do need to vent this outside even if only using detergent. My ahop is 26x49 with 10ft ceilings and after cleaning a few parts you can taste the detergent in the air. I made a flange and connected a dryer vent to it and now its perfect.

We bought this as part of a booth display to show how our products could function for combustion engine testing and development. It is light enough for a single person to carry, yet detailed enough to be eye-catching and spur spontaneous conversations. With how easy it was to mount labels, tubes, and wires, this is a great alternative for those who don't need a functional engine to display.

We bought this tire changer because we didn't want to have to buy an expensive piece of equipment AND upgrade our air compressor capacity. This tire changer was perfect! Our previous tire machine would only allow us to change up to 15" tires. The TC500M works great for all our needs. The tubular metal arm that rotates the deck and works the bead breaker could be better constructed (ours bent) but other than that the TC500M has been a welcome addition to our workshop. The price was great and the customer service was great too!

I was searching the internet for a good garage lift to accommodate my Harley Roadglide. Looking through all the sites and lifts out there, I came across the Redline DT1K. It was a great lift with all the accessories included for a great price. Upon arriving, I could see the excellence in craftsmanship. Despite what other reviews say, I was able to lift my 900lb bike without issue using a small shop compressor with a 2 gallon storage tank, pushing 2.2 scfm at 90psi. You won’t be disappointed!

The Redline 3100 rotisserie is very well built and the perfect tool for a frame off restoration project…….. currently a ‘64 Malibu SS. I would highly recommend this product to anyone in the market.

Purchased this item Jan 2023 have been more then satisfied with it's quality & the way it works as advertised. I can lower the wheels & move my lift any where in my shop with ease & once I retract the wheels the lift does not move. Great product & well worth the cost.

I bought this rotisserie for multiple project's. My fist is a 64 chevy pickup. It bolted on easy. Once I got it balanced I can turn it with one hand. It makes easy to get to any part of the truck. I am completely salified.

To start, this truly is a great rotisserie for the the money. I'm restoring a 1983 Porsche 944 on it and its been great to have. Not doing much if any rust repair, but its made stripping the underside of undercoating a breeze and surely will make painting later much easier and will help yield a better result. Was super easy to set up and arrived undamaged. If your thinking about getting one for your home restoration I would recommend. It will save you time, your back, and aid in getting that professional result your going for.

Love this thing! Made everything so much easier working on the bike. Make sure to get the extended sides. I turned them upside down and used them as temp tool trays. It’s heavy, so you really need two people to set it up. Once it’s pieced together it’s really easy to move by one person with the handle and wheels. Had it for three years now with no problems

Purchased the ROT3000-LD for my brother. The rotisserie and the specific kit for a 2d Gen Camaro worked flawlessly. He was close enough to pick it up and that process went smoothly as well. The consumer support is great. I did my research and selected a great product. You can spend a lot more, but you won't get a better rotisserie. This device will serve us both well into the future. Thank you.

Very solid and well designed piece of equipment with little frame spring at higher loads. Only issue I have found is that the hydraulic release is too low on the far right, slowing down release on production operations.

This tranmission jack eliminates what would be a two man job to one man. It also is the safety feature we are all looking for when working alone especially under a vehicle..

This is possibly the best and most often used piece of equipment we have purchased.Absolutely love it.We use it for a final cleaning of carburetors to flush out contaminants after machining.It is well made and works perfectly. We are also looking into purchasing their engine run stand.A very reputable company to work with.

I bought this vice for my motorcycle lift and I couldn't be happier, works a treat just what I wanted
Thank you

I've had this for awhile and so far it's met my needs. Easy enough for one person to assemble most of it, I had to have my wife hold the side panels while I put them on but that was it. Instructions are not stellar but if you bought this you likely have enough mechanical sense to figure it out. I like how high it goes. The only thing I don't like is the unlock process to let it down, seems a little sketchy to me to be reaching around underneath it, but it's been ok so far.

I’m a recent owner of the 1500HD and haven’t used it yet to lift anything heaver than myself. It came well packaged and undamaged. This is definitely a nice lift and worth the money. That said, I’m using it for something other than lifting motorcycles or ATVs, so my critique may be meaningless to most people.

One of Redline’s Youtube videos states that it is “virtually effortless” to move because of the built in casters. I beg to differ. It is moveable but far from “virtually effortless”. As a matter of fact it is quite difficult to move, especially if it needs to be positioned fairly accurately (within 1/4 in.).

Also my platform is not flat. With nothing on it the platform sags about 1/2 in.

I also find the hose from the lift to the pump to be a bit short. With the lift all the way up (for easier moving) the pump can’t be put on the platform, so it is necessary to move the lift about 2 ft. then move the pump, them move the lift again, etc.