All Product Reviews

I especially love the bigger wheels. Makes it easy to push outside for the sandblaster. Has lived up to my expectations and then some.

Just bought this lift for my shop. Have no problems lifting my dirt bikes. Have done some maintenance using the lift it really is awesome to do an oil change and not have to get on the floor! My only negative is that the drop out don't line up with my dirt bike rear tire. Which is not a big deal for me. Though I'm sure I could adjust it so it does line up but, not a show stopper for me.

I wanted to upgrade my old thousand pound lift to a 1500 lb lift . Saw this and thought I would give it a try . Great table I love the height. Been working flawlessly. A couple of issues for a small engine shop that works on lawn mowers is riding lawn mowers won't go up on it it's a little too high off the ground. The blades get hung up on the edge trying to push up on the table and then I have to lift up the tractor to get the wheels on to get it on the lift. Last issue is color the stand is black all bolts and nuts disappear in the black. I wish whenever I bought they had color choices I would have went with a gray or a red something where Parts stand out instead of hiding in the black. My old thousand lb handy lift was about 20 years old I hope this one last just as long.

I have a 2014 HD Street Glide and a 1993 HD Fatboy, both lowered 1-1/2 to 2". The jack fits easily when I pull the bikes very slightly towards the upright position while sliding the jack underneath. No doubt it will slide under a stock height bike. Very smooth operation and I love the way it "slowly" lowers the bikes. The stand is awesome! Fits both bikes easily and VERY sturdy. I would highly recommend this to anyone looking for a jack and/or stand.

The build quality is great! Having adjustable height is also great! Have my 2008 Street Glide up on it, rolls around with ease! At full height makes it convenient to do engine work. Wish the casters had locks, but it doesn't seem to roll away easily. All in all, I highly recommend!

Very impressed with the quality and extra features. They have detent tabs that push out to prevent them from sliding off the table.

I purchased a body cart dolly from Redline. The interaction I had with the staff when purchasing was very helpful picking out the one that suits me best. It was shipped in a timely manner. Went to put it together and noticed there was no instructions included and was missing some bolts and washers. Watched the video on line on putting it together. It was very helpful and easy. I put our project car (68 Charger) on the dolly without any issues. I’m very satisfied with the product and the price. [Added by Redline: Customer is correct in that no instructions are included with this dolly. In the "videos" tab on this page, we have an assembly video for this product, which serves as our manual. If you receive one of our products and it is missing any hardware, please let us know and we'll either mail the missing hardware to you, or reimburse you for buying the nuts/bolts locally.]

After trying to clean and repair the old pedal that came with my unit, I decided to buy this one. The cover over the plunger is a little tight. Seems like I can only get the toe of the shoe inside it but other than that, it work great. I considered buying just the valve for my old unit, but this was a better deal.

I purchased a Handy BOB 1500 w/ the trike kit and absolutely love the product. Redline was very helpful with keeping me informed of availability of this product and in assisting with delivery.
Outstanding buying experience.

I like this lift very much. The only issue is the wheel vise doesn't function properly. [Note added from Redline - Many customers believe a wheel vise can and should hold a motorcycle up firmly without the need to strap the bike to the table. This is not correct with any motorcycle lift table, not just a Redline table. Please be sure to use ratchet straps to secure your bike to the table and do not solely rely on the wheel chock or vise.]

I bought this cabinet almost 2 years ago. Mine actually has the covered filter motor but other than that looks the same. It’s a great cabinet, however I did not do enough research before purchasing, we are a small manufacturing business and totally underestimated how much we would actually use the blaster, we work the dog out of it and we have run through a few parts keeping it running, this isn’t the fault of the machine. We will be upgrading soon but one point that is very important, the customer service from Redline, it’s been outstanding, they have everything we’ve broke in stock and shipped out very quickly, the support guys are very friendly and stay in gauged until our issues have been addressed. I can’t say enough good things about Redline service and as for this particular machine it is a work horse but if your working if 5-7 hours a day be prepared to clean the catch bucket every 3hrs or it’s a bear to unbuckle and hold up at the same time, also there is no back flow on the filter so that too needs to be removed and manually blown out and cleaned every 3 hrs. When comparing this to the 25k units you can decide if the huge price difference vs cleaning requirements is worth it. We have our guys shoot for 2.5 hrs, take a break, clean the machine then work another 2.5 and clean again then call it a day. So we get 5hrs of blasting done which works for us. I might mention the parts we have gone through, air hoses, window screens are kind of a pain, door shocks, the pressure pot block valve, air regulator but again a quick call to Redilne and they had what needed in the mail and to us with in a few days.

Bought the Redline 1500HD, motorcycle/atv lift. Also bought the electric/hydraulic upgrade. I did some fabrication to the base and recessed into the concrete floor. I scrapped all the metric hardware and put in SAE hardware. Haven’t used it to lift a motorcycle yet but did lift 1500 lb of sakcrete with it.? Did well. For the price I did expect better quality like zerk fittings, and a better grade of hardware. The warning of additional shipping charges should be stated on the website instead of the package. [From Redline: Please know that our website reads - Shipping upgrades offered in cart page. Sadly, this policy is forced upon us by Google. We were told by Google that if we did not move our state shipping surcharges off of our product page, Google would no longer show our advertisements in search results.]

Great customer service and fast shipping. The replacement foot control is a great upgrade from the original controller. Easy set up with minimal down time. Comes ready to go with fluid, hook up and you are back to work.

I purchased the Kernel Motorcycle Cruiser Center Stand Jack several months ago and was attracted to it because the handle broke down into two pieces and fit in my suitcase to take to my overseas assignment. I have another center stand lift in the US, but the handle was one piece. The Kernel stand does exactly what I wanted it to do; lift my 2022 Road King (FLHR) to allow me to clean the wheels and perform routine maintenance. One improvement would be to make the Stand Base (item 9 in parts list) and Stand Top (item 14 in parts list) two inches longer. Currently the handle extension is too close to the left saddlebag when in use, but it can be done. In addition, the Plastic Clamps (item 12 in parts list) do not hold the vinyl cover securely enough to the stand top. But overall, I would give it 4 stars.

It had no instructions but I figured it out and it works great!

This was used as a replacement to the original pump to a Harbor Frieght lift. I got lucky and found I have a direct switch. No issues in changing it out. Just should have bought the hoses along with it.

Great! No instructions as was advertised.

Tips for install - Remove grease fittings and nubs on left and right arms to slide out rods. My rods were not threaded - I fished them out with Allen wrench.

GREAT PRODUCT!!! Thanks!!!

While my workshop was being built, I had time to look at a LOT of lifts before getting this. I could have spent a lot more for a better one (like the grey Made In the U.S.A. one), or a lot less for a janky-but-does-the-job one (you know, the red one with the foot pedal from That Chain Store). This hit the Goldilocks spot of price/performance, especially when everybody else tacks on a couple hundred for shipping only after you've looked at your cart.

I'll start with the dislikes, because you have to have some. First, the powder coat comes off immediately where the rollers run along the rails. Kind of expected I guess because that's a heavy wear area and aside from rust prevention before delivery, powder coating it seems pointless. I'll just strip it all off where the rollers make contact and give 'em a light coat of WD to keep them from rusting, but cleaning up red flakes after the first few uses was sub-optimal.

Second, the roller-style dropout panel seems gimmicky to me. Unless you have a bike that is exactly the right length so that the rear tire sits on the rollers when the front's in the vise, or you want to park it on the sidestand while rolling your tire (sketchy), it's pointless, and it's a pretty big hole to push your bike through when loading and unloading. I know... some people love 'em; different strokes.

I had a local metal shop cut and bend a new panel from 1/8" sheet and bought some square tube to cut and weld in for support. $40 for materials and a can of red spray paint and I have a solid panel that fits even better than the original (which was fine, to be fair).

That's about it. Otherwise, after decades of crawling around on the ground when working on bikes, using it has been and exercise in "where have you been all my life!"

It's sturdy, especially with the stabilizer bar, and the finish seems durable so far after a couple of tool drops and oil dribbles. It raises quickly and easily with my 26 gal. compressor. I'm a hobbyist who works on my own bikes and sometimes does work for friends, and I expect this will give me years of use with little trouble.

My only regret is that I didn't get the side extensions which, since I've used the lift a few times, I now realize would come in really handy even if they're not a necessity.

I'll also say that Redline's customer service was excellent. I had questions about both the product and the shipping process that were answered promptly by actual humans. Plus, they have some really informative YouTube videos that helped me make my decision.

great quality , work great, quick arrive thanks redline

the machine is well made strong an works good. delivery was quik an i had it set up an running in no time. my only complaint is the safety lock pin is to easy to forget about it. if you forget about the pin and try to operate it, youll break the pin off. so long as you remember to raise the pin up hwen your ready to use it, your good and it works great, just dont forget that! id give it 5 stars if it wasnt for this. overall great machine adn would buy another

I was pleasantly surprised how smoothly everything went with my order and how fast I received my item considering it shipped truck freight. I haven’t had a chance to use this jack but assembly was straight forward and it operates smoothly. I don’t expect any issues with it. They informed me of a problem with shipping to my location and we got it straightened out. Redline is a great company to deal with.

I was looking for a 20 ton press and came across redline stands presses. I looked at presses on ebay and amazon which looked about the same build quality but had no customer service. So I purchased a 20 ton from redline stands. The shipping and packaging was on point. When it arrived I had one question about assembly so I called customer service and got a quick and polite answer to my question. After finishing the assembly the sleeve on the bottom of the ram was threaded crooked and was not flush when I tightened it up. I call again and a video, two day after a package arrived with a new ram and the collar piece. I switched out the collar piece and it was perfect. I called and told customer service everything was fine and I would send back the ram and collar. The same day I was emailed a return label. The customer service and technical assistance was outstanding!! If your looking for a press look no further redline stands it the place. A very good press but the customer and technical support was priceless. Thank you redline stands

Press is very well constructed, and functions exactly how you would expect, with plenty of power even before the tonnage limit. Nothing on it seems cheap with no corners cut. Shipping was a bit of a nightmare due to unforseen circumstances in the freight world, but Redline was quick to do everything in their power to get the machine to us intact and complete. Would absolutely do business again.

Assembly was fairly straightforward even though the instructions were translated and lacking in specifics. The unit is sturdy and works pretty well. The top of mine doesn't quite line up correctly, but the clip holds it in place. It does blow some media out through the top seams even at a pressure of 40 psi. After a short period, it becomes very difficult to see what is happening inside the cabinet even with the light. I may try to add a port for a Shop-Vac to evacuate the dust. I am using glass bead with an equivalent of 80-100 grit.

Easy assembly, quality and makes working on your projects much easier no matter what they are.

I recently purchased a Redline Rotesserie. I will say, the rotesserie is great … but.. the company is even better. The delivery as well as communication was better that one expects now days. When I purchased the rotesserie, I was not aware of the other items that Redline sells. If you need anything related to automotive restoration or even shop equipment, look no further. And NO… I am not a “paid” spokesman for Redline..just a totally satisfied and soon repeat customer !

Seriusly though, why is this thing so cheap? Mine is awesome! Ben using it about 6 months and its a soilid peace of equipment.

Overall super nice but wish it had a front drop out panel. Would have given 5 stars if it had the front drop out.

This ain't no import crap and it shows. Extremely heavy duty and the little tool trays are handy for nuts and bolts. Main factor was that the sides were pieces instead of two so I can set it up for my Spyder. Redline guys knew their s***

Luv my lift. The sliding wheel chock is awesome as I have two bikes. Super good welds and finish. I like it has two pedals for up and down instead of one. Very high quality.

I've been using mine for over a year and it's awesome. Good features and price. Reline sales made it easy to ship to Canada although it cost a little more it was worth it.

This thing is friggin amazing! Tons of height an super smooth to operate. Just dont lower the lift with adrop panel hanging down or it will scratch the cylinder. Dont ask me how I know ha

I purchased this lift because I have a bad back and can't work from the floor or a seat anymore and this lift has been great. I purchased in 2020 so I've been using daily for about 3 years. I use this to work on golf carts, ATV's, lawn equipment, as a table lift and it's never had issue lifting anything up to 1500 lbs. My only regret is I didn't not purchase the electric upgrade because my compressor wasn't efficient enough to keep up with the demand of the table and I had to upgrade my compressor. After speaking to Redline support (which was extremely helpful) they informed me the compressor needs to be at least 7 CFM otherwise it will run the entire time you lift the table (super annoying!). But the table is great, no issues, super solid!

Works great I installed one to go to the basement for my wife

when I buy one where can I get someone to install it if someone can let me know thanks

I purchased the redline 1500hd lift table . The table is heavy duty built solid.once opened crate I was a easy set up and the guys at redline was great to with friendly and helpful during purchase. And to answer some questions YES a Harley Davidson tri glide ( trike ) will fit on the table perfect and lift it .

I started a small business last year and have seen some growth. Wife has heard me complaining about my small desktop press and did this with out me knowing. It arrived today and it's great! I was worried that the guys at Redline might take advantage of her, but she said they were great and walked her through the entire process even showing her competitior presses. Thank you to the sales staff. It is truely appreciated!!!

Started a smithing company 3 years ago with a desk top HF sand blaster. It worked pretty good and got me built up in business so I needed a biigger cabinet. Went to RL an found this one. It was kind of frustrating to get start at first but the guy at Redline was Johnny on the spot and got be up in no time. Great customer service after the sale.

This is a great lift overall. The packaging was very good. No scratches or dents on any of the parts. Very heavy and stable lift table. Great color choices. I chose orange. The air over hydraulic ram works very well. Smooth down. I love the side extensions. The front extension makes it a little long for my Softail. I’ll have to remove it for most of my work. The only thing I did differently was to immediately replace the pins for the extensions. The ones that come with it are a sliced open arm or leg waiting to happen.

We needed to mount a unibody to the rotisserie to rotate it so we could get through our double doors, as the body was too wide to go though just on a dolly. The stand came in a crate and it was well packed. It went together fairly easy. The instructions could have been a little better, but just looking at the parts and the additional pictures online, we did not have any issues. It is a great product for the price. THANKS!!!

Good luck finding a 200 ton press for this price anywhere else. All the other ones we found were way more money and had long lead times. I wish they made bed plates or custom tooling, but we were able to get ours made at a local machine shop.

It looks to be a quality cabinet. Haven't used it yet, but very much looking forward to it. Great people to deal with and great customer service. Would highly recommend. Look forward to future purchases.

We use this press daily and it performs. Great value for a press this big. Needed some technical help when we first set it up because the pump was making noise. They told us to add some more fluid and boom, flawless ever since.

Redline Stands I got it fixed last night. I took oil line off of the gauge and there is that inline screw that was left in there. I unscrewed it and took out completely. Everything works perfectly now. Its a good press, glad I bought it.

This thing is huge, but in a good way. I was going to buy their other electric 100 Ton press, but then I noticed that this one has a throat width about 10” wider. That extra space works well for me as some of my components are BIG. Only four stars because the winch sticks out on the side. I wish it was tucked inside the frame like the other model they sell.

Like that it has two speeds my last press was air powered too but only had one speed. I use the fast setting to take up the gap and then change to the lower speed to finish the job. I was worried that you get what you pay for but in this case you get a lot of machine and it works well for way less than other brands You won’t be disappointed.

Not bad seals up good and only leaks sand when you open the door so be prepared for that. works well with my 12 cfm air compressor and remove paint quickly. Construction was an 8 outta 10 my only complaint is lack of vacuum system to filter out the dust but i didnt pay the price of a vacuum equipped blaster so i guess i can’t complain. Over all it works pretty good and Id recommend it

So if you’re planning to roll the rotisserie outdoors across dirt or gravel without this kit, it ain’t happening. The quality is solid, but 1 of my tires was losing air. I contacted Jason at Redline and he sent me a new tire/wheel so I’m good to go now. Pay attention to the fact that the wheels in the center mount higher than the standard wheels. This causes you to have to raise the car higher in order to rotate the car to clear the larger wheels. I think the price is a little high for what it is, but if you gotta have it, you gotta have it.

This thing is a beast! The welds are solid and the powder coating is good, not great, but okay. Took a while to assemble cause the instructions were so so. The pictures on the website were more help than the instructions. Make sure you get it balanced correctly, cuz if you don’t, the car will flip over fast enough that it aint no fun. Once I got used to operating it I can’t imagine restoring a car without it.

Oh my God I shoulda bought one of these years ago. It makes doing a restoration soooo much easier. Overall, the build quality is great. The casters roll easy, the balancer works well, and the gear drive is an absolute must. Allows you to stop the car at any angle you want. The gear drive has a little bit of play in it, so be prepared to use the locking jam bolt at the opposite end to stabilize the car at whatever angle you decide. Should have bought the body dolly adapter kit with mine cause now when I’m trying to work on the firewall, the rotisserie is in the way. Overall, I give it 4 outta 5 stars.

Got It! Installed it! Thanks for the great service!!!

this thing is rock solid it’s a bit hard to move with the casters but they still work okay i guess. It goes up a lil slow but has no problem lifting my 2014 harley davidson electra glide or my industrial zero turn riding mower. the safety bar works really good to and id buy another for sure

Been shopping for a while and finally go the ok from the wife to pull the trigger. Salesman was very helpful and answered all my silly questions. Crate arrived damaged and vise was missing. Called the guy and he got me a replcement vise shipped that day. All in all it was a very good experience

Overall, pretty impressed. The welds are decent but not amazing. Same can be said for the powder coating. The drop-out tail section is really handy and functions well. I’m giving it 4 stars because it has no ability to attach side extensions, so you can’t use it on ATV’s and riding lawn mowers.

Have you ever tried to do all the metal work, cleaning, cutting, welding while laying on your back under the car??? I was doing that. I wanted to make life easier on myself. I started looking at rotisseries. There were 2 major concerns I had.
1. Was the rotisserie really going to be the quality I expected for the money?
2. Would I have the ceiling clearance to flip my 57 Chevy in a residential garage with an 8 foot ceiling?

The answer to both is YES! The product is beautiful and definitely what I expected! I was able to flip my car in my garage. Now, my neck and back feel way better because I can work standing next to the floorboards.

I read all the reviews and some of them helped me make my decision. I hope my review helps make others happy when they get theirs! The staff is very helpful, responsive and professional! They are willing to help! JKing was VERY helpful to me. Shipping was very fast!

Like others said, the instructions could be a little better, but if you’re mechanically inclined, it’s a 1.5-2 hour assembly. Would buy this a 1000 times over! I love it! Thank you from Cleveland, Ohio!

I have one of the original central machinery motorcycle tables from harbor freight. My pump wouldn’t stop leaking I tired new seals and that didn’t help. I purchased this and a piece of 1” solid round bar from tractor supply and 15 mins later I was back in business. Thank you so much!!

can yall build a lift to raise 13' with contols at bottom and top. Response from Redline - Sir, you have left a review, not a question. Because of this, we have no ability to contact you with the answer and thus, we hope you see this reply. No sir, we do not offer any custom lift fabrication services. Thanks Mr. Warner.

I bought one yesterday to rotate the tires on my kids car. The old jack I had was dead. I was really impressed with the quality and ease of use. Great jack for the money.

Purchased the ROT300-LD and product was shipped the next day. Picked up at Freight carriers and was in good condition no damage. Instructions are a little weak, but if you're a car guy you can put together in 2 hours by just using the exploded view diagram...not hard at all. Construction is surprisingly good, nice welds, good thickness tubing, etc. Will get a lot of use out of this unit. Well worth the money!

This press has worked perfectly for 3 yrs now had to get a part infer warranty they sent it out next day they stand behind there product no questions asked

Recently purchase one in January easy ordering crated well electric pump lifts trike no problem only things a little disappointing is the dip stick hard to read for oil level I just marked it with a marker second the hydraulic line to me is a little short I had a longer one made more room between lift and pump very happy with lift operation

Seems to work great so far. Original pump was so bad it was creeping down almost as fast as I could pump it up. Had been thinking about getting a bottle jack and modifying the controls to fit, but finally took the easy way and bought this.
Anyway, this new one is holding great, although I want to use it a while and through different temperatures before final judgement.
Instruction would have been helpful. It wasn't immediately apparent to me how the rods are removed. The ones that go through the lift frame and into the pump. But, thanks to another review finally realized I could thread in a long 5/16 bolt. They pulled out easily with that. Another review said you need to go buy steel rod to replace these. I don't see why. The original ones swap over to the new pump just fine.
Minus 1 star for the set screws. One threaded in fine, the other wouldn't thread in no matter how long I tried. Then I messed up and mistook the 6mm thread for 1/4-28. Tried to chase the threads with that size tap, wrecked the threads enough that the set screw wouldn't tighten. So, went and bought 8mm ser screws, drilled out to the right tap drill size, tapped. Those threads seem to be very robust. Tightened up set screws and they feel like they could go much tighter. (No need tho; only needs to keep the rods from working their way out).
I suspect that the pump was a rebuilt HF unit that had bad threads. My suggestion would be to drill these out and tap 8mm-1.25 threads and include 8mm set screws. Could save your customers some time.

Thanks Redline for providing me with a direct replacement for my HF motorcycle lift! The only modification I had to make was to the manual pump linkage alignment, which was very simple using a spacer and bolt to offset the linkage. NO WELDING necessary! There was no need to buy the 1" round stock as I used the existing 1" pivot rod stock from the old pump. The conversion took maybe an hour.

Regarding your 50 ton shop press, we did purchase it, assembled it, and presently using it. Just wanted to let you know that this is a hell of a piece of equipment that you guys got going. Really appreciate the hard work. Very nice piece of equipment. It’s making my day enjoyable. Be safe; keep up the good work. Thank you sir.

Fit perfect! A little adjustment on the manual pump lever was all I had to modify. You will need a 1in dia x 13in long pin to install. Cut in half for the pins. GTG! FROM REDLINE STAFF: We suspect this customer is talking about installing this pump on a different table, such as a Harbor Freight table, but we cannot be sure as he does not specify. Given that this pump is a direct bolt-in replacement on a Redline LD1K lift with no modification needed, we're certain this customer has not installed this pump into the Redline LD1K.

I bought the pressure pot model last may, it’s been a very good machine. Like you said it took a bit to fine tune it but once we got it dialed, it’s held up great. We bought the unit with the mindset of lite industrial duty but the projects quickly became more demanding and we questioned weather the cabinet was going to handle 100lbs flanges going in and out all day… so far it’s holding up great.

As previously stated these need to be modified to fit correctly. since we are seeing the same issue, it would be simple for the manufacturer to correct it. but apparently, they don't want to or feel its not a big deal. Love the item just wish the manufacturer would correct the issue. Reply from Redline - Sir, now that we have seen this issue more than once and are aware it is not a fluke, we'll get right on that. Being that we do not have a Mopar B-body car handy, could you please reply with the dimensional corrections that are needed? Thank you sir!

The safety latch wouldn't reset when you lowered the table. Had to heat and bend the lever so it hit the main arm when lowering to reset the safety. Now it works great

- Response from Redline - Sir, while we appreciate your willingness to handle an issue, we request if any customer receives a defective part, please let us know and we'll gladly ship a replacement.

Added one of these to our rather large Ag shop and the thing is super useful, the vac for the floor saves a lot of cost in floor dry alone and way less mess.
Also it does away with lugging heavy drain pans to the oil disposal tank, you simply pump it out in short order, Don't hesitate just get one!

I purchased the Redline Auto dolly after struggling with the Eastwood dolly. The redline is a much better design with heavier tubing and fittings. It is 50% longer giving you much better flexibility for larger cars such as Jeep Grand Wagoneers that I restore. A real bargain especially with free shipping. Very responsive staff and owner. Thanks Dave!!

It performs exactly what it's supposed to do! I highly recommend it.

Purchased this 3Ton Floor Jack and I couldn’t be happier! Quality build and quality service!

i bought this 5 gal. bucket pourer for my 5 gal. pails of sugar-water i feed my honey bee's. it works great and is very well constructed. the only thing is it comes with no directions, but can be easily figured out. i recommend this product.

I landed a production run contract, my current system was not capable of keeping up so I started looking for better solutions. There are many production level units on the markets and they are quite expensive, because I’m a smaller guy I thought it would be better to looks at “a step down” .. I bought this unit, set it up had one issue that customer service was very helpful with ( I didn’t attach the nozzle properly) then started working with it. I can’t not see how the higher price units could be anymore effective. The build quality it took notch and the hardware/components are same. This is a very well built and operating unit, I’m blasting flanges, on the old unit one flange took 18-20min, I was doing them in 7-8min last night. I’m very excited my production time has greatly increased ergo my profits. This isn’t a cheap purchase but what you get for the price is amazing. This unit and this company score a 10 from me.

The B.O.B. is a fantastic lift. the build quality and smooth powerful operation make this the lift of choice in the shop, going to buy another one soon to replace my other lift.

So, finally found time to put this to use. The size is incredibly convenient and doesn't tax my 30 gallon compressor too much. I used glass beads and blasted some small metal parts that had rust and welding scale. It cleaned them up nicely and allowed for quick and even polishing once done. The box is pretty tight and there is minimal leakage. I had read that the nozzle was placed to where the media would blast upward towards the glass so I simply unscrewed the nozzle from the back, taped over the screw holes, and used the nozzle as a hand-held gun. This gave me more room to work and allowed me to aim into tight spots much easier. Overall, this is a nice little sandblaster and will suit most of what I need. It stores away easily as I don't have a lot of benchtop space to dedicate to it. Very pleased!

Stand is solid, I leave my road glide on it for hours at a time! I gave it a 4 out of 5 stars because I wish it locking casters because my driveway isn’t perfectly level.

So, this is my initial impression as I've not yet put this into use. I will update when I do.
First, ridiculously fast shipping. This company shipped same day and I received the following day, and they did it for "free."
Second, there is not much to put together as it comes in a fairly complete package.
Third, The unit is not flimsy as I expected. I thought it would be very light gage metal and something I would have to be careful with. The opposite is true, the material is relatively substantial and the door has some weight to it. It "feels" like a quality product. The latch in front is spring-loaded and I like that, too.
Overall, a positive initial experience. Once I begin to use this I will post a follow-up, but I'm happy with this so far!

Absolutely works and fits perfectly. Take note as in other reviews you absolutely have to order some 1 inch bar stock, two pieces about 5 inches long to replace the bars that are attached to the original pump. Otherwise it works great.

Well built and fully assembled, ready to install. Came with high quality screws for mounting.
I got the 84" version. Shipping was very fast.

You can imitate but you can never duplicate the best,Had the opportunity to take my bike to my buddies house and utilize this lift, most definitely going to purchase one now that I had the opportunity to disassemble my bike without even bending over…

This is the only rotisserie I've ever owned, but I'm very pleased with it. The quality of the welds and the steel is good. It's easy to use and assemble. The crate showed up in perfect condition, and everything that was supposed to be there was. I've been using this for the last couple weeks on a major project for a 57 Chevy Wagon

Setting up the cabinet is fairly easy; anyone who has ordered furniture, etc should have no problem with assembly. Seems to be working pretty well. Be sure to have the seal covering the corners well. Also, I picked up some medium media; I will be picking up some heavier stuff to remove heavy rust and weld burns. For the money, I’m pretty okay with it.

Grade A service From start to finish. The sales team was very helpful and the quality is very good. I picked my Rotisserie up at the local terminal that happened to be Fedex. The crate was in perfect condition and after inventory I had every last nut, bolt and washer. Assembly took about 2 hrs and the rotisserie works perfect. Thanks Redline!!!

I have purchased the above Rotisserie. After some shipping delays have received it. I a very please with the construction of it. Looks very well made. Welding is good. Casters are well constructed and roll great in gravel and dirt and great on concrete. Perfect for my car restoration needs.

Nice lift, works pretty good with my 675 lbs Harley softail. although it barley fits under the bike, have to do alot of wriggling to get it under and back out again. Overall great value, does what it says, and is very well made. Will be buying more from Redline soon. Harley Jason

VERY well made, the workmanship was outstanding, but the 37-9712 stand and 37-9718 Ducati 41 mm pin both do not fit my 2019 V4S Panigale. Sprocket side axle I.D. Is smaller than the 41 mm pin and the ‘throat’ of the stand (distance between pin and roller bar) is too short to clear 200/60ZR17 OEM tire. Concerned with lack of response by sales staff when alerting them of these fitment issues. I’m hoping to hear from them soon

Response from Redline:
Sorry about that. You haven't heard from us because we still haven't heard back from K&L. I'll get with them first thing this morning when they open.

The build is very strong and welding near perfect.
I should mention that the whole transaction was over the internet and phone I live in NH over a thousand miles away.
I would not hesitate to do business again with Redline.
Joe A

I have had my Redline Scissor Lift stand for a little over a year now and have used it for countless builds. It is an incredibly useful and versatile stand and I have not had any issues with it. It is great for complete teardowns and builds as it allows you to keep the frame secure as the bike comes apart and back together. The height options are very useful for being able to work at a comfortable level. I have also found myself using this stand around the garage when needing to reach high on shelves and such and avoided having to buy a ladder, which is of course not its intended use but just an added bonus. 10/10 would recommend.

I've used my new wheel dolly for about a week now, and I can easily say that I wish I would have bought it much sooner. It adjusts easily from small sedans to minivans, SUVs, pickups and heavy duty trucks quickly and efficiently. The wheel dolly is a heavy duty product and its construction shows it. The full loop handle makes it much easier to handle heavy loads that product that only have a single grip. The main tire rollers are smooth ball bearing operated, which make it very easy to maneuver any size tire I worked with into position. It takes a little bit of familiarization to get the hang of how to position your tire right onto the wheel lugs without having to go hands-on, but that is to be expected. Overall, a fantastic product at a great value for the price paid given the robust construction. There are several other such products on the market today, however, this is one of only a few that I would call "heavy duty".
Alas, there are two areas where I would offer suggestions for improvement:
(1) Wing nuts: in rather stark contrast to all other aspects of this products, the three wing nuts supplied for fastening the handle to the wheel dolly body are substandard and of very poor quality. Totally out of context in relation to the other components used. These wing nuts are drilled off center, and do not appear to be correctly tapped for the metric M10-1.5 thread of the bolts used for the handle. The poor quality of these three wing nuts made it very difficult to securely attach the handle to the dolly, with their wobbly nature making it hard to securely tighten them. Out of frustration, I purchased three quality stainless steel M10-1.5 wing nuts from my local Home Depot. What a difference that made! The handle can now be easily attached and detached for storage, and the operation of these wing nuts is smooth and crisp, just like the rest of the product. Redline if you are listening, please upgrade the quality these three fasteners immediately. It is without a doubt a sore point on an otherwise nicely executed product.
(2) This wheel dolly is designed to stand upright unassisted by the operator only when it is loaded with a wheel. When unloaded, the handle drops to the floor unless propped up against an object. I am planning to fabricate some sort of pivoting prop at the lower bend of the handle that can be moved into position in order to keep the handle from falling to the floor when unloaded. I would like to recommend that this be considered as a design enhancement for future versions of this product, as it would keep the rubber handle from lying on the floor and posing a tripping hazard around the shop.

This has been my first experience with RedLine Engineering and RedLine stands, and I would say I am a very happy with the product and the value received for my purchase price. I would have liked not to have had to purchase decent wing nuts, but it really was necessary to properly enjoy using the product.
Hope someone finds this review helpful.

I ordered the #AT-BCC-A body cart and received it two days later. Upon opening the boxes, I found some parts that missed quality control. I sent pictures to Redline's Customer Service and I received a prompt response promising to remedy the issue. The replacement parts were delivered the next day! I am a happy customer! Redline is a top-notch company with outstanding customer service and products! I will be purchasing other products from them in the future. Thank you JKing!

FIRST HANDY LIFT I BOUGHT I KNOW THEY WHERE GREAT LIFT AND IT DID NOT DISAPPOINT THIS LIFT IS MUCH STRONGER AND STABLE THAN MY OTHER FOUR LIFTS

I'm out in the boonies, so getting a new lift would have been a hassle aside from the cost, and this pump rescued me.

My unit had a frozen release valve. It was absolutely packed solid inside the spring with paint so it couldn't move. I took it apart and soaked it in acetone to dissolve the paint, and cleaned it, and now it works. It was a minor issue and not difficult to rectify once I figured it out.

It's nice to have a lift that doesn't spray oil all over the floor, and slowly sink.

It was well worth the money and this completely rejuvenates an important tool. Thank you for supplying this!

Product would be great if it incorporated a jack system. Where
you could raise or lower the tire to the exact height of the hub.

excellent ordering, packing and delivery. lift is what they said it was. perfect for my trike. great people to deal with.

I can't find anything bad to say about this press other than some poor grammar in the instruction documentation (not that I write any better). I paid a bit more for this model so that I'd get the sliding head, 1" cartridge pin holder, pressure gauge, and air motor actuator. I've modified the base by replacing the floor rails with a rectangular tubing frame with wheels so I that can move this around in my shop. I've also adapted a heavy duty 20 ton finger brake to this press.
Customer support was responsive, friendly, and helpful with an assembly question I had.

After doing a bunch of research, it basically came down to price, this was by far the best bang for the buck. Usually you sacrifice something to get things cheaper but not only was the crate in perfect shape when it arrived less than a week later, their customer service and correspondence was stellar. Highly recommend.

I bought psl 1500 handy bike lift,
It's very well engineered, I highly recommend to buy Handy lift after my months of reseaching lifts. Front wheel chalks very sturdy built, also Included is center scissor jack and priced very competitively.

I see that you guys carry replacement pumps, and I really appreciate that. Most folks don't support their products with parts after the sale, so that's nice to see.